SELT1WA13CM

5-1-1 Unicolor lamps ■5φ Inverted-Cone LEDs (for lighting-panels and illumination) SEL1013M Series Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 3.6 4.0 20 10 20 468 20 470 20 30 20 3.1 4.0 20 40 20 458 20 465 20 25 20 3.1 4.0 20 200 20 Chromaticity: x=0.300, y=0.295 3.1 4.0 20 180 20 Chromaticity: x=0.452, y=0.412 3.1 4.0 20 180 20 Chromaticity: x=0.170, y=0.365 3.1 4.0 20 220 20 Chromaticity: x=0.356, y=0.289 3.1 4.0 20 180 20 Chromaticity: x=0.200, y=0.300 3.1 4.0 20 280 20 Chromaticity: x=0.260, y=0.460 3.1 4.0 20 200 20 Chromaticity: x=0.382, y=0.268 3.1 4.0 20 150 20 Chromaticity: x=0.421, y=0.221 Chip Material GaN on Si InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN Part Number Emitting Color Blue Blue White Bulb Light Fancy blue green Light pink Light blue green Fancy green Fancy pink Fancy red purple Lens Color Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear SELK1E13CM-D High luminosity SELT1E13CM SELT1WA13CM SELT1WC13CM SELT1WD13CM Ultrahigh SELT1WE13CM luminosity SELT1WF13CM SELT1WH13CM SELT1WJ13CM SELT1WK13CM Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 ø5.0 0° 30° 60° 30° 5.0 5.8 (1.0) MAX. 0.65 0.5 0.5 MIN 1.0 90° 100% 50 0 50 90° 100% MIN 19.0 60° (2.54) Product Mass: Approx. 0.27 g 234 LEDs ø5.6 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs