SELU1810CXM

5-1-1 Unicolor lamps ■5φ Round Wide Viewing Angle LEDs SEL1010XM Series Part Number Emitting Color     Deep red     Red     Amber     Light amber     Orange Ultrahigh Yellow      luminosity Green          Pure green     Aqua blue     Blue     Blue     Blue High     Blue luminosity Lens Color Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Diffused white Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 2.0 2.0 2.0 2.0 2.0 2.1 2.1 3.3 3.6 3.7 3.3 3.3 3.6 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.2 4.0 4.0 4.0 20 20 20 20 20 20 20 20 20 20 20 20 20 350 280 570 350 450 300 150 3200 1500 1000 1000 255 200 20 20 20 20 20 20 20 20 20 20 20 20 20 650 635 615 598 591 572 560 512 486 468 460 460 468 20 20 20 20 20 20 20 20 20 20 20 20 20 639 625 607 595 590 571 562 520 488 470 465 465 470 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 16 15 15 12 35 30 25 25 25 30 20 20 20 20 20 20 20 20 20 20 20 20 20 Chip Material AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP InGaN InGaN InGaN InGaN InGaN GaN on Si * SELU1610CXM-S SELU1210CXM SELU1810CXM SELU1B10CXM-S SELU1910CXM-S SELU1710CXM SELU1410CXM-S SELT1D10CXM-S SELS1L10CXM-S SELS1E10CXM-M SELT1E10CXM-S SELT1E10WXM-S SELK1E10CXM-D * * * * * * Mass production in preparation Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 ø5.0±0.2 –30° –60° 30° 60° –60° –30° 30° 60° (1.0) 6.9±0.2 0 0 Cathode 23.0min 0.65max 0.5±0.1 1.0min –90° 100% 50 0 50 90° 100% –90° 100% 50 0 50 90° 100% (2.54) AlGaInP InGaN ø5.6±0.2 Product Mass: Approx. 0.30 g 0.5±0.1 Resin heap 1.5max LEDs 221 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs