SELU1853CM-S

5-1-1 Unicolor lamps ■4.6 × 5.6φ Egg-Shaped LEDs SEL1053M Series Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 2.0 2.0 2.0 2.5 2.5 2.5 10 20 20 140 200 550 20 20 20 560 635 611 10 20 20 567 625 605 10 20 20 20 15 17 10 20 20 Chip Material GaP AlGaInP AlGaInP Part Number SEL1453CEMKT SELU1253CMKT SELU1853CM-S Emitting Color Green        Red Ultrahigh luminosity        Amber Lens Color Transparent green Water clear Water clear Directional Characteristics (representative example) 0 –30° –60° 30° 60° –60° –30° 0 30° 60° External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 Resin heap 1.5max Resin burr 0.3max 4.6±0.2 5.6±0.2 –90° 100% 50 0 50 90° 100% –90° 100% 50 0 50 90° 100% AlGaInP 0 –30° –60° 30° 60° –60° –30° 0 30° 60° 7.7±0.5 5.7±0.2 0.5±0.1 4.7±0.2 0.65max Cathode –90° 100% 50 0 50 90° 100% –90° 100% 50 0 50 90° 100% GaP Product Mass: Approx. 0.30 g 224 LEDs 1.0min (2.54) Anode 23.5min 2-0.5±0.1 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs