0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
SI-3000KF_11

SI-3000KF_11

  • 厂商:

    SANKEN(三垦)

  • 封装:

  • 描述:

    SI-3000KF_11 - Low Current Consumption, Low Dropout Voltage - Sanken electric

  • 数据手册
  • 价格&库存
SI-3000KF_11 数据手册
1-1-4 Linear Regulator ICs SI-3000KF Series Low Current Consumption, Low Dropout Voltage ■Features • Compact full-mold package (equivalent to TO220) • Output current: 1.0A • Low dropout voltage: VDIF ≤ 0.5V (at IO = 1.0A) • High ripple rejection: 75dB • Low circuit current at output OFF: Iq (OFF) ≤ 1µ A • Built-in overcurrent and thermal protection circuits ■Absolute Maximum Ratings Parameter DC Input Voltage Output Control Terminal Voltage DC Output Current Power Dissipation Junction Temperature Storage Temperature Operating Ambient Temperature Thermal Resistance (Junction to Case) Thermal Resistance (Junction to Ambient Air) Symbol VIN Vc Io PD1 PD2 Tj Tstg Top Ratings SI-3010KF 35*1 VIN 1.0 16.6 1.72 –40 to +125 –40 to +125 –40 to +100 6.0 58 Unit V V A W W °C °C °C °C/W °C/W Remarks (Ta=25°C) With infinite heatsink Without heatsink, stand-alone operation θ j-c θ j-a Without heatsink, stand-alone operation ■Applications • Secondary stabilized power supply (local power supply) *1: A built-in input-overvoltage-protection circuit shuts down the output voltage at the Input Overvoltage Shutdown Voltage of the electrical characteristics. ■Recommended Operating Conditions Ratings Parameter Input Voltage Range Output Current Range Output Voltage Variable Range Operating Ambient Temperature Operating Junction Temperature Symbol VIN IO VOADJ Top Tj SI-3010KF 2.4*2 to 27*1 0 to 1.0*1 1.1 to 16 –30 to +85 –20 to +100 Unit V A V °C °C *1: VIN (max) and IO (max) are restricted by the relationship PD (max) = (VIN - VO) × IO = 16.6W. *2: Refer to the Dropout Voltage parameter. ■Electrical Characteristics Ratings Parameter Symbol min. VADJ Reference Voltage Conditions ∆VOLINE Line Regulation Conditions ∆VOLOAD Load Regulation Conditions VDIF Dropout Voltage Conditions Conditions Quiescent Circuit Current Circuit Current at Output OFF Temperature Coefficient of Output Voltage Iq Conditions Iq (OFF) Conditions ∆VO/∆Ta Conditions RREJ Ripple Rejection Overcurrent Protection Starting Current*3 Control Voltage (Output ON)*4 Control Voltage (Output OFF) Control Current (Output ON) Control Current (Output OFF) Input Overvoltage Shutdown Voltage Conditions IS1 Conditions VC, IH Conditions VC, IL Conditions IC, IH Conditions IC, IL Conditions VOVP Conditions 33 IO=0.01A –5 VIN=7V, VC=2V 0 VIN=7V, VC=0V VIN=7V 40 2 VIN=7V 0.8 1.1 VIN=7V, VC=2V VIN=7V, VC=0V ± 0.5 VIN=7V, IO=0.01A, VC=2V, Tj=0 to 100°C, VO=2.5V 75 VIN=7V, IO=0.1A, VC=2V, f=100 to 120Hz, VO=5V dB mV/ °C VIN=7V, IO=0A, VC=2V 1 IO=0.5A, VC=2V, VO=5V 0.5 IO=1.0A, VC=2V, VO=5V 600 VIN=7V, IO=0 to 1A, VC=2V, VO=5A 0.3 V VIN=6 to 15V, IO=0.01A, VC=2V, VO=5A 75 mV 0.98 SI-3010KF typ. 1.00 VIN=7V, IO=0.01A, VC=2V, VO=5A 30 mV max. 1.02 V Unit µA µA A V V VC Terminal µA µA V *3: IS1 is specified at the 5% drop point of output voltage VO on the condition that VIN = overcurrent protection starting current, IO = 10 mA. *4: Output is OFF when the output control terminal VC is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs. *5: SI-3000KFE cannot be used in the following applications because the built-in foldback-type overcurrent protection may cause errors during start-up stage. (1) Constant current load (2) Positive and negative power supply (3) Series-connected power supply (4) VO adjustment by raising ground voltage 80 ICs SI-3000KF Series ■Block Diagram SI-3010KF ■Ta-PD Characteristics 20 With Infinite Heatsink Silicone Grease: G746 (Shin-Etsu Chemical) Heatsink: Aluminum Power Dissipation PD (W) VIN 2 4 VOUT 15 200×200×2mm (2.3°C/W) 10 100×100×2mm (5.2°C/W) 75×75×2mm (7.6°C/W) VC 1 TSD – + 5 ADJ 3 GND 5 Without Heatsink 0 –30 –20 0 20 40 60 80 Ambient Temperature Ta (°C) 100 REF ■Typical Connection Diagram ●SI-3010KF D1*1 VIN 2 + VO 4 R1 + CIN VC GND ADJ 1 5 3 *2 CO Load R2 R3 CIN: Input capacitor (22µF or larger) CO: Output capacitor (47µF or larger) If a low ESR capacitor (such as a ceramic capacitor) is used for the output capacitor, oscillation may occur. *1. D1: Reverse bias protection diode This diode is required for protection against reverse biasing between the input and output. (Sanken RU2Z is recommended.) R1, R2: Output voltage setting resistors The output voltage can be adjusted by connecting R1 and R2 as shown above. The recommended value for R2 is 10kΩ. R1=(VO–VADJ)÷(VADJ/R2) *2: Insert R3 in case of setting VO to VO ≤ 1.5V. The recommended value for R3 is 10kΩ. ■External Dimensions (TO220F-5) 4.2±0.2 ±0.2 2.8 4.0±0.2 7.9±0.2 (Unit : mm) 0.5 10.0 ±0.2 16.9±0.3 φ 3.2±0.2 2.6±0.1 (2.0) 0.95 ±0.15 +0.2 Pin Assignment q Vc w VIN e GND r Vout t ADJ Plastic Mold Package Type Flammability: UL 94V-0 Product Mass: Approx. 2.3 g 0.85 –0.1 P1.7±0.7×4=6.8±0.7 0.45 –0.1 +0.2 3.9±0.7 (4.3) 8.2±0.7 12345 4.6±0.6 (4.6) (17.9) ICs 81
SI-3000KF_11 价格&库存

很抱歉,暂时无法提供与“SI-3000KF_11”相匹配的价格&库存,您可以联系我们找货

免费人工找货