SLA5227

http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Features ・Built-in IGBT and diode bridge of partial switching PFC circuit Enable to reduce mounting area ・Low saturation voltage IGBT VCE(sat) = 1.7V max ・Low saturation voltage diode bridge VF = 1.1V max ・The clip lead is adopted for inner lead. Low inductance, low resistance, high current capability The smoke generation and explosion are less likely to occur in case of destruction. Package ＳＬＡ Oct.2010 Equivalent circuit 3 (cut) Applications ・Partial switching PFC 1 2 4 5 6 (Ta=25℃) Absolute maximum ratings Characteristic Collector to Emitter Voltage Gate to Emitter Voltage Continuous Collector Current Pulsed Collector Current Diode Peak Reverse Voltage Diode Forward Current Diode Peak Surge Forward Current Diode I2t Limiting Value Maximum Allowable Power Dissipation Symbol Ratings Unit VCES VGE IC(DC) IC (pulse) VRM IF IFSM ※2 I2t ※3 PT※4 θj-a※4 θj-c※4 25 1.36 5 92 ※1 600 ±30 30 100 600 25 200 200 (No.Fin Ta=25°C) (Tc=25°C) (Junction-to-Ambient) ( Junction-to-Case ) 3.91 ( Junction-to-Case,IGBT 1 Element Operation ) V V A A V A A A2s Ｗ °C /W °C /W °C /W °C /W Vrms °C °C Thermal Resistance θj-c IGBT θj-c Di 8.33 ( Junction-to-Case,Di 1 Element Operation ) Isolation Voltage Operating Junction Temperature Storage Temperature VISO Tj Tstg 1500 ( Between Fin and Lead Pin, 1minute AC) 150 -40∼150 ※1. PW≦10μs, Duty≦1% ※3. 1ms≦PW≦10ms ※2. PW≦10ms, Half sinewave, 1shot ※4. All Element Operation The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 1 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Electrical characteristics ● ＩＧＢＴ Characteristic Collector to Emitter Breakdown Voltage Gate to Emitter Leakage Current Collector to Emitter Leakage Current Gate Threshold Voltage Collector to Emitter Saturation Voltage Collector to Emitter Saturation Voltage Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Symbol Test Conditions min Limits typ Oct.2010 (Ta=25°C) max unit V(BR)CES IGES ICES VGE(th) VCE(sat) VCE(sat) Cies Coes Cres td(on) tr td(off) tf IC= 100μA, VGE=0V VGE= ±30V VCE= 600V,VGE=0V VCE= 10V,ID=1mA VGE=15V,IC= 30A VGE=15V,IC= 50A 600 ±500 100 3 1.3 1.6 2500 6 1.7 V nA μA V V V VCE=20V f=1.0MHz VGE=0V 150 80 80 pF IC=50A VCE≒300V RG=39Ω VGE=±15V See fig.1 190 ns 120 320 ● Ｄｉ Characteristic Forward Voltage Drop Reverse Leakage Current Reverse Leakage Current Under High Temperature Symbol Test Conditions (Ta=25°C) Limits min typ max 1.1 50 200 VF IR H·IR IF= 12.5A VR=600V VR=600V,Tj=150°C The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 2 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Electrical characteristics I C - VCE (typical) 15V 10V Oct.2010 IC - VCE (typical) Tc=25℃ 100 VGE=20V 15V 10V 8V 7V Tc=125℃ 100 80 VGE=20V 8V 80 7V IC (A) 40 20 0 0 1 2 VCE （V) 3 4 5 IC (A) 60 60 40 6V 6V 20 0 0 1 2 3 4 5 VCE （V) VCE(sat) - Tc (typical) VGE=15V 3 IC=100A IC - VGE (typical) VCE=5V 100 80 VC E(sat) (V) 2 70A IC (A) 50A 60 40 20 0 30A 1 10A Tc=-40℃ 25℃ １25℃ 0 -50 0 50 Tc （℃) 100 150 0 5 VGE （V) 10 15 C apa - VCE (typical) 10000 Tc=25℃ f=1MHz VGE＝0V VCE,VGE - Qg (typical) 40 VC E (×1 0V) , VGE (V) VCE 30 Tc=25℃ RL=6Ω Capac itanc e (pF) Cies 1000 20 VGE 10 100 Coes Cres 10 0 10 20 30 40 50 VCE(V) 0 0 20 40 Qg (nC) 60 80 The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 3 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Electrical characteristics V CE - VGE (typical) Tc=-40℃ 5 4 VC E (V) 3 2 1 0 1 10 VGE （V) 100 IC=100A 50A 10A Oct.2010 SWTime - IC (typical) Tc=-40℃ 1000 S W T i m e ( n s) tf 100 tdoff tdon tr R Load VCE=300V VGE=±15V RG=39Ω 10 1 10 IC （A) 100 VCE - VGE (typical) Tc=25℃ 5 4 1000 SWTime - IC (typical) Tc=25℃ tf VC E (V) 3 2 1 0 1 10 VGE （V) 100 IC=100A 50A 10A S W T i m e ( n s) 100 tdoff tdon tr R Load VCE=300V GE=±15V RG=39Ω 10 1 10 IC （A) 100 VCE - VGE (typical) Tc=125℃ 5 4 VCE (V) 3 2 1 0 1 10 VGE （V) 100 IC=100A 50A 10A SWTime - IC (typical) Tc=125℃ 1000 tf S W T i m e ( n s) tdoff 100 tr tdon R Load VCE=300V VGE=±15V RG=39Ω 10 1 10 IC （A) 100 The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 4 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Electrical characteristics S WTime - RG (typical) Tc=-40℃ 1000 Oct.2010 IF - VF (typical) 100 80 S W T i m e ( n s) tf 100 tr tdoff tdon R Load IC=50A RL=6Ω VGE=±15V IF (A) 60 40 25℃ 20 0 １25℃ 10 1 10 RG （Ω) 100 0 1 VF （V) 2 3 SWTime - RG (typical) 1000 Tc=25℃ S AFE OPERATING AREA 1000 tf IC(pulse) max S W T i m e ( n s) 100 tr 100 tdoff tdon R Load IC=50A RL=6Ω VGE=±15V IC [A] 10 1 0.1 IGBT Tc=25℃ 1shot 10μs 100μs 1ms 10 1 10 RG （Ω) 100 1 10 VCE [V] 100 1000 SWTime - RG (typical) 1000 tf Tc=125℃ Reverse Bias ASO 1000 S W T i m e ( n s) tr 100 IC [A] Tc=25℃ Tc=125℃ 100 tdoff tdon R Load IC=50A RL=6Ω VGE=±15V 10 IGBT VGE=±15V Rg=39Ω 1shot 10 1 10 RG （Ω) 100 1 1 10 VCE [V] 100 1000 The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 5 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Electrical characteristics Oct.2010 TRANSIENT THERMAL RESISTANCE - PULSE WIDTH 1.E+01 1.E+00 Rt h j- c (℃/ W) 1.E-01 1.E-02 1.E-03 1.E-04 1.E-06 ＩＧＢＴ IGBT Tc=25℃ VCE＝5V 1 1素子 Device 1shot 1.E-05 1.E-04 1.E-03 1.E-02 PW (sec) 1.E-01 1.E+00 1.E+01 1.E+02 T RANSIENT THERMAL RESISTANCE - PULSE WIDTH 1.E+02 1.E+01 Rth j- c (℃/W) 1.E+00 1.E-01 1.E-02 1.E-03 1.E-06 Di Di Tc=25℃ 1 Device 1素子 1shot 1.E-05 1.E-04 1.E-03 1.E-02 PT (sec) 1.E-01 1.E+00 1.E+01 1.E+02 The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 6 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Fig.1 Switching Time Test Method Oct.2010 VCC≒300V IC=50A RL=60Ω VGE=±15V RG=39Ω (a) Test Circuit (b) Waveforms The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 7 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Oct.2010 Outline Dimensions between root Dimensions from tops SLA (LF No. 822) Gate Burr a JAPAN ＳＬＡ５２２７ b Dimensions from tops Dimensions between root Dimensions from tops Dimensions from tops Dimensions from tops a：Type No. b：Lot No. Weight Approx. 6g The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 8