SLA6845MZ-LF2178

High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 General Description Package The SLA6845MZ provides a highly-integrated solution by incorporating key components into one package – IGBTs in a 3-phase full-bridge configuration, built-in ● Package Name: ● Pin Pitch: ● External Size: SLA 1.27 mm 31 × 16 × 4.8 mm protection functions such as UVLO (undervoltage lockout) and TD (thermal detection) circuits, and pre-driver ICs with 7.5 V regulator output. The SLA6845MZ employs three LS terminals to configure a 3-shunt current detection system. ns The product is supplied in a SIP package with Al heatsink. es ig Applications Include motor control for: • Air conditioner fan D • Air purifier fan • Washer-dryer fan ew • Dishwasher pump rN Features and Benefits m d IGBT Breakdown Output Current (Continuous), IO (A) IGBT Saturation Voltage, VCE(sat) (V Typ.) Package 3.0 1.75 Al heatsink m Voltage, VCES (V) 600 ec o SLA6845MZ en Product Specifications Part Number Not to scale de ● Built-in protection circuit for controlling power supply voltage drop (UVLO) ● Built-in overheat detection circuit (TD) ● Regulator output: 7.5 V, 35 mA ● Small SIP (SLA, 24 pins) ● 3-shunt current detection fo ● CMOS-compatible input (3.3 or 5 V) Functional Block Diagram VB2 VB3 R VB1 ot VBB1 N VCC1 VBB2 UVLO HIN1 HIN2 HIN3 Input Logic UVLO UVLO UVLO High Side Level Shift Driver COM1 VCC2 VREG LIN1 LIN2 LIN3 7.5 V Reg. UVLO Input Logic Thermal Detection U V W1 W2 Low Side Driver COM2 LS3 LS2 LS1 FO Sanken Electric Co., Ltd. http://www.sanken-ele.co.jp/en/ I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 1. Scope The specifications described in this document shall apply to the SLA6845MZ, a high-voltage 3-phase motor driver IC. 2. Absolute Maximum Ratings, valid at TA = 25°C Remarks VCES VCC = 15 V, IC = 1 mA, VIN = 0 V Logic Supply Voltage VCC Between VCC and COM Bootstrap Voltage VBS Between VB and phase U, V, or W Unit 600 V 20 V 20 V 3.0 A IO TC = 25°C Output Current (Pulsed) IOP TC = 25°C, PW ≤ 100 μs 4.5 A Output Current for Regulator IREG fo 35 mA Input Voltage VIN −0.5 to 7 V Allowable Power Dissipation PD TC = 25°C 32.8 W All elements operating (IGBT) 3.8 °C/W R(j-c) F All elements operating (FWD) 4.2 °C/W All elements operating (IGBT and FWD) 25 °C/W Rj-a d de Case Operating Temperature TC(OP) −20 to 100 °C ot R Thermal Resistance (Junction-to-Ambient) HIN and LIN pins en m R(j-c) Q ec o Thermal Resistance (Junction-to-Case) rN Output Current (Continuous) m ew D IGBT Breakdown Voltage Ratings ns Symbol es ig Characteristics Tj 150 °C Tstg −40 to 150 °C N Junction Temperature Storage Temperature Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 3. Electrical Characteristics 3-1. Electrical Characteristics, valid at Ta = 25°C, VCC = 15 V FO Terminal Output Voltage IGBT Leakage Current IGBT Saturation Voltage Diode Forward Voltage VBB = 300 V, VCC = 15 V, IC = 3 A, HIN = 0→5 V or 5→0 V, inductive load VBB = 300 V, VCC = 15 V, IC = 3 A, LIN = 0→5 V or 5→0 V, inductive load es ig ns Ratings Typ. Max. 4 6 135 380 2.0 2.5 1.5 — 0.5 — 50 100 10.0 11.0 10.5 11.5 0.5 — 11.0 12.0 11.5 12.5 0.5 — — 1.0 — 5.5 — 1 1.75 2.1 1.65 2.0 315 — 50 — 80 — 375 — 165 — 395 — 60 — 75 — 395 — 170 — Unit mA μA V V V μA V V V V V V V V mA V V ns ns IN trr toｆｆ ton N ot R ec o Switching Time, Low Side m m en Switching Time, High Side Min. — — — 1.0 — — 9.0 9.5 — 10.0 10.5 — 0 4.0 — — — — — — — — — — — — — D Undervoltage Lockout (Logic Supply) ew Undervoltage Lockout (Bootstrap) IREG = 0 A VBS = 15 V, HIN = 5 V Output ON Output OFF Hysteresis VIN = 5 V Between VB and U, V, or W Between VB and U, V, or W Between VB and U, V, or W; hysteresis Between VCC and COM Between VCC and COM Between VCC and COM; hysteresis VCC = 15 V, IFO = −1 mA VCC = 15 V, IFO = 1.6 mA VCE = 600 V, VIN = 0 V, VCC = 15 V VCC = 15 V, ICE = 3 A,VIN = 5 V VCC = 15 V, IF = 3 A,VIN = 0 V rN Input Current ICC IBS VIH VIL VHYS IIH VUVHL VUVHH VUVhys VUVLL VUVLH VUVhys VFOL VFOH ICES VCE(sat) VF td(on) tr trr td(off) tf td(on) tr trr td(off) tf fo Input Voltage Remarks d Logic Supply Current Bootstrap Supply Current Symbol de Characteristics td(oｆｆ) td(on) 90% VCE IC tｆ tr 90% 10% 10% Switching Characteristics Definitions Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 3-2. Recommended Operating Conditions Characteristics Symbol Main Supply Voltage Logic Supply Voltage Dead Time VDC VCC tdead Min. — 13.5 1.5 0.5 0.5 Between VBB and LS Between VCC and COM tINmin(on) tINmin(off) Ratings Typ. Max. 300 — — — — 450 16.5 — — — Unit V V μs μs μs 3-3. Truth Table L H L H L H L H L H L H L H L H L L H H L L H H L L H H L L H H OFF ON OFF ON OFF ON OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON ON en m ew rN An arm short-circuit may occur when inputs on the HIN and LIN pins for the same phase are all logic high. Therefore, extra attention should be paid to prevent a condition in which the pins for the same phase are fully ON at once. When returning to the Normal operation mode from a VCC UVLO state, high-side and low-side IGBTs resume switching on the rising edge of an HIN input (positive edge triggering). When returning to the Normal operation mode from a VB UVLO state, a high-side IGBT resumes switching on the rising edge of an HIN input (positive edge triggering). R 1) ec o UVLO (VB)3) D Low-Side IGBT m UVLO (VCC)2) High-Side IGBT de OCP LIN fo Normal1) HIN d Mode es ig ns Minimum Input Pulse Width Remarks ot 2) N 3) Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 4. Pin-out Diagram JAPAN SLA6845MZ YMDD Pin 24 ns Pin 1 Functions de d fo rN ew D Phase U output High-side bootstrap (phase U) High-side bootstrap (phase V) High-side bootstrap (phase W) High-side logic supply voltage High-side logic GND High-side input (phase W) High-side input (phase V) High-side input (phase U) Main supply voltage 1 (connected to VBB2 externally) Main supply voltage 2 (connected to VBB1 externally) Phase W output (connected to W2 externally) Phase V output Phase W output (connected to W1 externally) Low-side emitter (phase W) Internal regulator output Low-side emitter (phase V) Low-side input (phase W) Low-side input (phase V) Low-side input (phase U) Low-side logic GND Overheat detection and UVLO protection fault-signal output Low-side logic supply voltage Low-side emitter (phase U) en U VB1 VB2 VB3 VCC1 COM1 HIN3 HIN2 HIN1 VBB1 VBB2 W1 V W2 LS3 VREG LS2 LIN3 LIN2 LIN1 COM2 FO VCC2 LS1 m Pin Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 N ot R ec o m Pin Number es ig Terminal List Table I/O Output — — — — — Input Input Input — — Output Output Output — Output — Input Input Input — Output — — Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 5. Application Example Dboot Rboot 2 3 4 11 10 VB1 VB3 + HO1 1 HS1 + HO2 13 D HS2 9 HIN1 8 HO3 COM1 HS3 12 + + Cs 14 fo HVIC 23 M rN 6 HIN3 ew HIN2 7 ns VCC1 es ig 5 VB2 d VCC2 m 20 ec o m 19 18 N ot R 16 + 15 V LIN1 LO2 17 LIN2 LIN3 LO3 VREG 15 CC 22 21 24 en Controller de LO1 FO COM2 LVIC RS NOTES: ● All of the input pins are connected to GND with internal pull-down resistors rated at 100 kΩ. However, an external pull-down resistor may be required to secure stable condition of the inputs if high impedance conditions are applied to them. ● The external electrolytic capacitors should be placed as close to the IC as possible, in order to avoid malfunctions from external noise interference. Put a ceramic capacitor in parallel with the electrolytic capacitor if further reduction of noise susceptibility is necessary. Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 6. Timing Diagrams for Protection Operations High-Side Input/Output HIN UVHH VB-HS ns UVHL es ig UVLO Release ew D HO rN High-side turn-on at the next rising edge on HIN signal after UVLO release. d fo Low-Side Input/Output en de LIN m UVHH VCC UVLO Release ec o m UVHL ot R LO N FO TDH Tmic TDL Low-side turn-on in accordance with LIN signal level after UVLO release. Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 7. Package Outline Drawing 7-1. Leadform 2171 (Dimensions in Millimeters) Gate Protrusion ns JAPAN es ig A B rN ew D (Measured at Base of Pins) (Measured at Pin Tips) m en de (Includes Mold Flash) d fo (Measured at Pin Tips) N ot R ec o m ■ Branding Codes A. Part number: SLA6845MZ B. Lot number: YMDD# • Y is the last digit of the year of manufacture • M is the month of the year manufactured (1 to 9, O, N, or D) • DD is the day of the month manufactured (01 to 31) • # is the Sanken control number Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 JAPAN A ns (Measured at Base of Pins) rN (Measured at Pin Tips) ew D B es ig (Measured at Pin Tips) 7-2. Leadform 2175 (Dimensions in Millimeters) (Measured at Pin Tips) fo (Measured at Pin Tips) m m en de d (Includes Mold Flash) N ot R ec o ■ Branding Codes A. Part number: SLA6845MZ B. Lot number: YMDD# • Y is the last digit of the year of manufacture • M is the month of the year manufactured (1 to 9, O, N, or D) • DD is the day of the month manufactured (01 to 31) • # is the Sanken control number Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 8. Packing Specifications 8-1. Leadform 2171 (Dimensions in Millimeters) 31.2 D 580 es ig ns ■ Tube Type: SLA-F Rubber plug each end Maximum 18 pieces per tube (pins aligned along X direction) ew 13.8 fo rN X N ot 137 R ec o m m en de d ■ Corrugated Shipping Carton 621 Maximum 12 tubes in Y direction Maximum 3 layers in Z direction 186 Z Y Maximum pieces per carton: 18 pieces per tube 12 tubes per layer × 3 layers of tubes 648 pieces per carton Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 8-2. Leadform 2175 (Dimensions in Millimeters) 31 D 580 es ig ns ■ Tube Type: SLA-E 15.8 ew Rubber plug each end Maximum 18 pieces per tube (pins aligned along X direction) fo rN x N 130 ot R ec o m m en de d ■ Corrugated Shipping Carton 610 Maximum 10 tubes in Y direction Maximum 3 layers in Z direction 185 Z Y Maximum pieces per carton: 18 pieces per tube 10 tubes per layer × 3 layers of tubes 540 pieces per carton Sanken Electric Co., Ltd. I02-005JB-070823 High Voltage 3-Phase Motor Driver IC SLA6845MZ March, 2015 IMPORTANT NOTES  All data, illustrations, graphs, tables and any other information included in this document as to Sanken’s products listed herein (the ―Sanken Products‖) are current as of the date this document is issued. All contents in this document are subject to any change without notice due to improvement, etc. Please make sure that the contents set forth in this document reflect the latest revisions before use.  The Sanken Products are intended for use as components of general purpose electronic equipment or apparatus (such as home es ig ns appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the Sanken Products, please put your signature, or affix your name and seal, on the specification documents of the Sanken Products and return them to Sanken. If considering use of the Sanken Products for any applications that require higher reliability (transportation equipment and its control systems, traffic signal control systems or equipment, disaster/crime alarm systems, various safety devices, etc.), you must contact a Sanken sales representative to discuss the suitability of such use and put your signature, or affix your name and seal, on the specification documents of the Sanken Products and return them to Sanken, prior to the use of the Sanken Products. Any use of the Sanken Products without the prior written consent of Sanken in any applications where extremely high reliability is required (aerospace equipment, nuclear power control systems, life support systems, etc.) is strictly prohibited.  In the event of using the Sanken Products by either (i) combining other products or materials therewith or (ii) physically, D chemically or otherwise processing or treating the same, you must duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility. ew  Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the fo rN occurrence of any failure or defect in semiconductor products at a certain rate. You must take, at your own responsibility, preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which the Sanken Products are used, upon due consideration of a failure occurrence rate or derating, etc., in order not to cause any human injury or death, fire accident or social harm which may result from any failure or malfunction of the Sanken Products. Please refer to the relevant specification documents and Sanken’s official website in relation to derating.  No anti-radioactive ray design has been adopted for the Sanken Products. d  No contents in this document can be transcribed or copied without Sanken’s prior written consent. de  The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples m en and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of use of the Sanken Products and Sanken assumes no responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property rights and any other rights of you, users or any third party, resulting from the foregoing.  All technical information described in this document (the ―Technical Information‖) is presented for the sole purpose of ec o m reference of use of the Sanken Products and no license, express, implied or otherwise, is granted hereby under any intellectual property rights or any other rights of Sanken.  Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or R implied, as to the quality of the Sanken Products (including the merchantability, or fitness for a particular purpose or a special environment thereof), and any information contained in this document (including its accuracy, usefulness, or reliability).  In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws ot and regulations that regulate the inclusion or use of any particular controlled substances, including, but not limited to, the EU RoHS Directive, so as to be in strict compliance with such applicable laws and regulations. N  You must not use the Sanken Products or the Technical Information for the purpose of any military applications or use, including but not limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Technical Information, or providing them for non-residents, you must comply with all applicable export control laws and regulations in each country including the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan, and follow the procedures required by such applicable laws and regulations.  Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including the falling thereof, out of Sanken’s distribution network.  Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting from any possible errors or omissions in connection with the contents included herein.  Please refer to the relevant specification documents in relation to particular precautions when using the Sanken Products, and refer to our official website in relation to general instructions and directions for using the Sanken Products. Sanken Electric Co., Ltd. I02-005JB-070823