2-Phase Unipolar Stepper Motor Driver
SLA7060M/61M/62M/65M/66M/67M
October 2005
■General Description
Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA706xM translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with internal fixed off time and pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™). There are no phase-sequence tables, high-frequency control lines, orcomplex interfaces to program.The CMOS logic section provides the sequencing logic, direction,control, synchronous/asynchronous PWM operation, and a "sleep"function. The minimum CLOCK input is an ideal fit for applications where a complex µP is unavailable or overburdened. TTL or LSTTL may require the use of appropriate pull-up resistors to ensure a proper input-logic high. For PWM current control, the maximum output current is determined by the user's selection of a reference voltage and sensing resistor. The NMOS outputs are capable of sinking up to 1, 2, or 3 A (depending on device) and withstanding 46 V in the off state. Clamp diodes provide protection against inductive transients. Special power-up sequencing is not required. Half-, quarter-, eighth-, and sixteenth-step operation are externally selectable for the SLA7060/61/62M. Full-, Half-, quarter-, and eighth-step operation are externally selectable for the SLA7065/66/67M. Half-step excitation alternates between the one-phase and two-phase modes (A-AB-B-AB-A-AB-BAB),providing an eight-step sequence.
■Package
■Applications
●PPC ●Printer ●OA Equipment
■Key Specifications
●Motor Supply Voltage (VM):44V max ●Load Supply Voltage (Vs):10V~44V ●Logic Supply Voltage (Vcc):3V~5.5V ●Output Current (Io):1A(SLA7060M,SLA7065M) 2A(SLA7061M,SLA7066M) 3A(SLA7062M,SLA7067M) ●Output Maximum Voltage (VDSS):100V min
■Features
●To 3 A Output Rating ●Internal Sequencer for Microstepping Operation ●PWM Constant-Current Motor Drive ●Cost-Effective, Multi-Chip Solution ●100 V, Avalanche-Rated NMOS Outputs ●Low rDS(on) NMOS Outputs (150 milli-ohms typical) ●Advanced, Improved Body Diodes ●nputs Compatible with 3.3 V or 5 V Control Signals ●Sleep Mode ●Internal Clamp Diodes
Typical Connection
VBB=VM=10~ 44V
CA OutB/ OutA/ VDD=3.0~ 5.5V Disable Q1 Reset CB CW/CCW R1 C1 OutB OutA VDD VBB
6 8 9 10 12 13 14 15
16
1
2
3
4
18
19
20
21
µ-con
Clock M2 M1 Mo Sync
SLA706xM Series
7
REF SenseA
5
11
17
SenseB
R3
R2
RSA
RSB
GND
S-GND
P-GND
.
Sanken Electric Co.,Ltd.
http://www.sanken-ele.co.jp/en/ I03-003EA-051006
1/18
2-Phase Unipolar Stepper Motor Driver
SLA7060M/61M/62M/65M/66M/67M
October 2005
Scope
The present specifications shall apply to a micro-stepping capable 2-phase unipolar stepper motor driver IC, SLA706xM Series. The present specifications shall apply to SLA706xM Series which is performed RoHS instructions. Lead part solder:Pb free Inner solder:Lead content >85%
Outline
Type Structure Applications Hybrid integrated circuit Plastic molded (transfer mold) To drive a 2-phase stepper motor. (Micro-Stepping Capable. PWM Constant-Current Control.)
Absolute maximum ratings
Characteristic Load Supply Voltage Main Power Supply Voltage Logic Supply Voltage Output Current Logic Input Voltage REF Input Voltage Sense Voltage Power Dissipation Junction Temperature Operating Temperature Range Storage Temperature Range Symbol VM VBB VDD IO
※
Ratings 46 46 7 1.0 2.0 3.0 -0.3~VDD+0.3 -0.3~VDD+0.3
±2
Unit V V V
Remarks
SLA7060M,SLA7065M
A V V V W W °C °C °C
SLA7061M,SLA7066M SLA7062M,SLA7067M
VIN VREF VRS PD Tj Ta Tstg
Tw
很抱歉,暂时无法提供与“SLA7067M”相匹配的价格&库存,您可以联系我们找货
免费人工找货