SMLU72423C-S

5-1-2 Bicolor lamps ■3.3 × 6 Bow Shaped Bicolor LEDs SML70023 Series (available as Direct Mount) Part Number Emitting Color Lens Color Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 25 20 630 10 620 10 35 10 2.0 2.5 10 35 20 560 10 567 10 20 10 1.9 2.5 10 25 20 630 10 620 10 35 10 1.9 2.5 10 25 20 587 10 590 10 33 10 1.9 2.5 10 25 20 610 10 605 10 35 10 2.0 2.5 10 35 20 560 10 567 10 20 10 1.9 2.5 10 25 20 587 10 590 10 33 10 2.0 2.5 10 35 20 560 10 567 10 20 10 2.0 2.5 10 150 20 590 10 590 10 15 10 2.0 2.5 10 40 20 570 10 571 10 30 10 2.0 2.5 20 26 3 650 20 639 20 20 20 2.0 2.5 20 3.8 3 560 20 567 20 20 20 2.0 2.5 20 120 20 635 20 625 20 15 20 2.2 2.5 20 30 20 560 20 567 20 15 20 2.0 2.5 10 150 20 590 20 590 10 15 20 2.2 2.5 10 30 20 560 20 567 10 15 20 Chip Material GaAsP GaP GaAsP GaAsP GaAsP GaP GaAsP GaP AlGaInP GaP AlGaInP GaP AlGaInP AlGaInP AlGaInP AlGaInP Remark A: Red B: Green A: Red SML72923C B: Orange A: Amber SML78423C B: Green A: Orange SML79423C B: Green A: Ultrahigh luminosity orange SMLS79723C B: Yellow A: Ultrahigh luminosity red SMLU76423C-S B: Green A: Red SMLU72423C-S Ultrahigh B: Green luminosity A: Orange SMLU79423C-S B: Green SML72423C *Mass production in preparation Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Cathode common Cathode common Cathode common Cathode common Cathode common Cathode common Cathode common Cathode common Directional Characteristics (representative example) External Dimensions 6.0±0.2 3.6±0.2 5.8±0.5 3.9 Resin burr 0.3max Resin heap 1.5max (Unit: mm) Dimensional Tolerance: ± 0.3 3.1±0.2 20.0min 30° 60° B 0° A 0° 30° 60° 60° 30° 30° 60° 0.65max 0.5±0.1 0.5±0.1 1.0min 1.5min (2.54) (2.54) 90° 100% 50 0 50 90° 100% 90° 100% 50 0 50 90° 100% 6.2 Internal Circuit Drawing Product Mass: Approx. 0.26 g 3.6 LEDs 247 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs