V(BR)DSS = 300 V, RDS(ON) = 0.15 Ω
N-channel Power MOSFET
SUK3015
Data Sheet
Description
Package
SUK3015 includes a low on-resistance N-channel
power MOSFET with Zener diode for ESD protection.
The package of SUK3015 is TO220S-2L that is surface
mount package and high heat release.
TO220S-2L
(4)
(4)
Features
● Suitable for High Reliability and Automotive
Requirement
● Bare Lead Frame: Pb-free (RoHS Compliant)
● Low On-resistance
● Gate-to-Source ESD Protection Zener Diode
● 100% Avalanche Tested
● V(BR)DSS ------------------------------ 300 V (ID = 100 μA)
● ID ------------------------------------------------------ ±15 A
● RDS(ON) -------------- 0.15 Ω max. (ID = 7 A, VGS =10 V)
● trr----------------------------------------------- 160 ns (typ.)
Applications
(1) (2) (3)
(3) (2) (1)
Not to scale
(2)(4)
(1) Gate
(2) Drain
(3) Source
(4) Drain
(1)
● DC/DC Converter
● Other Switched-mode Power Supply
(3)
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
1
SUK3015
Absolute Maximum Ratings
Unless otherwise specified, TA = 25 °C.
Parameter
Symbol
Conditions
Rating
Unit
Drain-to-Source Voltage
VDS
300
V
Gate-to-Source Voltage
VGS
±25
V
Continuous Drain Current
ID
±15
A
Pulsed Drain Current
IDM
±60
A
Avalanche Energy
EAS
50
mJ
Avalanche Current
IAS
26.7
A
Power Dissipation
PD
89
W
3.0
V/ns
8.5
V/ns
190
A/µs
Maximum Drain-to-Source dv/dt 1
‘dv/dt1
Maximum Diode Recovery dv/dt 2
‘dv/dt2
Pulse width ≤ 100 µs,
duty cycle ≤ 1 %
VDD = 49 V,
L = 120 µH,
IAS =26.7 A,
VGS = 16 V, RG = 0 Ω,
unclamped;
see Figure 1.
TC = 25 °C
VDD = 49 V,
L = 120 µH,
IAS =26.7 A,
VGS = 16 V, RG = 0 Ω,
unclamped;
see Figure 1.
VDD = 200 V,
L = 0.2 mH,
ISDP = 15 A;
see Figure 2.
VDD = 200 V,
L = 0.2 mH,
ISDP = 15 A;
see Figure 2.
Maximum Diode Recovery di/dt
‘di/dt
Operating Junction Temperature
TJ
150
°C
TSTG
−55 to 150
°C
Storage Temperature
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
2
SUK3015
Electrical Characteristics
Unless otherwise specified, TA = 25 °C.
Parameter
Symbol
Drain-to-Source Breakdown
V(BR)DSS
Voltage
Drain-to-Source Leakage Current
IDSS
Gate-to-Source Leakage Current
Gate Threshold Voltage
Static Drain-to-Source
On-resistance
Input Capacitance
Conditions
Min.
Typ.
Max.
Unit
ID = 100 μA, VGS = 0 V
300
—
—
V
VDS = 300 V, VGS = 0 V
—
—
100
µA
VGS = ±20 V
—
—
10
µA
VGS(TH)
VDS = 10 V, ID = 1 mA
1.5
2.0
2.5
V
RDS(ON)
ID = 7 A, VGS = 10 V
—
—
0.15
Ω
—
1800
—
—
420
—
—
85
—
VDD = 200 V,
ID = 7 A,
VGS = 10 V,
RG = 15.6 Ω,
RL = 28.6 Ω;
see Figure 3.
—
15
—
—
34
—
—
112
—
—
144
—
ISD = 7 A, VGS = 0 V
—
—
1.2
V
ISDP = 15 A,
di/dt = 100 A/µs;
see Figure 2.
—
160
—
ns
Conditions
Min.
Typ.
Max.
Unit
—
—
1.4
°C/W
Min.
Typ.
Max.
Unit
―
1.4
―
g
IGSS
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
Turn-on Delay Time
td(ON)
Turn-on Rise Time
Turn-off Delay Time
Turn-off Fall Time
Source-to-Drain Diode
Forward Voltage
Source-to-Drain Diode
Reverse Recovery Time
tr
td(OFF)
tf
VSD
trr
VDS = 10 V,
VGS = 0 V,
f = 1 MHz
pF
ns
Thermal Characteristics
Parameter
Thermal Resistance
(Junction-to-Case)
Symbol
RθJC
Mechanical Characteristics
Parameter
Conditions
Package Weight
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
3
SUK3015
L
VDS
V(BR)DSS
dv/dt1
ID
VDS
VDD
0
RG
VDD
VGS
ID
IDP
0V
0
(a) Test Circuit
(b) Waveform
Unclamped Inductive Switching Energy Test
Figure 1.
ISD
RL
ISDP
trr
0
VDS
RG
VGS
ID
2A
IRM × 90%
di/dt
VDD
IRM
VDS
dv/dt2
0V
VDD
150 V
100 V
Pulse width = 10 μs
Duty cycle 1%
0
(a) Test Circuit
(b) Waveform
Figure 2.
Diode Reverse Recovery Time Test
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
4
SUK3015
VGS
RL
90%
10%
0
VDS
RG
VGS
ID
VDS
90%
VDD
10%
0
0V
td(ON) tr
Pulse width = 10 μs
Duty cycle 1%
td(OFF) tf
tON
(a) Test Circuit
tOFF
(b) Waveform
Figure 3.
Resistive Load Switching Time Test
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
5
SUK3015
Derating Curve
Figure 4.
PD vs. TC
Typical Characteristic Curves
Figure 5.
Safe Operating Area
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
Figure 6.
ID vs. VDS
6
SUK3015
Figure 7.
Figure 9.
ID vs. VGS
RDS(ON) vs. TC
Figure 8.
Figure 10.
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
RDS(ON) vs. ID
Capacitance vs. VDS
7
SUK3015
Figure 11.
Figure 13.
V(BR)DSS vs. TC
VDS vs. QG
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
Figure 12.
Figure 14.
ISD vs. VSD
VGS(TH) vs. TC
8
Junction–Case Thermal Resistance (°C/W)
SUK3015
Pulse Width (s)
Figure 15.
Transient Thermal Resistance Characteristics
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
9
SUK3015
Physical Dimensions
● TO220S-2L Package
(1.4)
4.44 ±0.2
(5)
1.3 ±0.2
(1.2)
9.1 ±0.3
+0.3
10.5 -0.5
(0.45)
Gate burr
+0.2
0.86 -0.1
+0.2
1.34 -0.1
A
2.54 ±0.1
0.4 ±0.1
2.54 ±0.1
Dimensions between roots
Dimensions between roots
2.6 ±0.2
Dimensions between roots
10.2 ±0.3
1.5 ±0.3
+0.2
0.1 -0.1
0.3
0.3
Plane
Buck side (S=2/1)
+0.3
3 -0.5
(5.4)
3
1.4±0.2
2
(1.3)
1
０～８°
Enlargement of A (S=10/1)
NOTES:
-
Dimensions in millimeters
Maximum gate burr height is 0.3mm.
Bare lead frame: Pb-free (RoHS compliant)
Moisture Sensitivity Level 3 (MSL 3)
When soldering the products, it is required to minimize the working time within the following limits:
Reflow:
Preheat: 150 °C to 200 °C / 60 s to 120 s
Solder heating: 240 °C / 30s, 3 times (245 °C peak)
Soldering Iron: 350 °C / 3.5 s, 1 time
Marking Diagram
SUK3015
YM
DD
SK
Part Number
Lot Number
Y is the last digit of the year of manufacture (0 to 9)
M is the month of the year (1 to 9, O, N or D)
DD is the day of the month (01 to 31)
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
10
SUK3015
Important Notes
● All data, illustrations, graphs, tables and any other information included in this document (the “Information”) as to Sanken’s products
listed herein (the “Sanken Products”) are current as of the date this document is issued. The Information is subject to any change
without notice due to improvement of the Sanken Products, etc. Please make sure to confirm with a Sanken sales representative that
the contents set forth in this document reflect the latest revisions before use.
● The Sanken Products are intended for use as components of electronic equipment or apparatus (transportation equipment and its
control systems, home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the
Sanken Products, please put your signature, or affix your name and seal, on the specification documents of the Sanken Products and
return them to Sanken. If considering use of the Sanken Products for any applications that require higher reliability (traffic signal
control systems or equipment, disaster/crime alarm systems, etc.), you must contact a Sanken sales representative to discuss the
suitability of such use and put your signature, or affix your name and seal, on the specification documents of the Sanken Products
and return them to Sanken, prior to the use of the Sanken Products. The Sanken Products are not intended for use in any applications
that require extremely high reliability such as: aerospace equipment; nuclear power control systems; and medical equipment or
systems, whose failure or malfunction may result in death or serious injury to people, i.e., medical devices in Class III or a higher
class as defined by relevant laws of Japan (collectively, the “Specific Applications”). Sanken assumes no liability or responsibility
whatsoever for any and all damages and losses that may be suffered by you, users or any third party, resulting from the use of the
Sanken Products in the Specific Applications or in manner not in compliance with the instructions set forth herein.
● In the event of using the Sanken Products by either (i) combining other products or materials or both therewith or (ii) physically,
chemically or otherwise processing or treating or both the same, you must duly consider all possible risks that may result from all
such uses in advance and proceed therewith at your own responsibility.
● Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the
occurrence of any failure or defect or both in semiconductor products at a certain rate. You must take, at your own responsibility,
preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which the
Sanken Products are used, upon due consideration of a failure occurrence rate and derating, etc., in order not to cause any human
injury or death, fire accident or social harm which may result from any failure or malfunction of the Sanken Products. Please refer
to the relevant specification documents and Sanken’s official website in relation to derating.
● No anti-radioactive ray design has been adopted for the Sanken Products.
● The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples, all
information and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of
use of the Sanken Products.
● Sanken assumes no responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third
party, or any possible infringement of any and all property rights including intellectual property rights and any other rights of you,
users or any third party, resulting from the Information.
● No information in this document can be transcribed or copied or both without Sanken’s prior written consent.
● Regarding the Information, no license, express, implied or otherwise, is granted hereby under any intellectual property rights and
any other rights of Sanken.
● Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or implied,
including, without limitation, any warranty (i) as to the quality or performance of the Sanken Products (such as implied warranty of
merchantability, and implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken Product is
delivered free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course
of dealing or usage of trade, and (iv) as to the Information (including its accuracy, usefulness, and reliability).
● In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws and
regulations that regulate the inclusion or use or both of any particular controlled substances, including, but not limited to, the EU
RoHS Directive, so as to be in strict compliance with such applicable laws and regulations.
● You must not use the Sanken Products or the Information for the purpose of any military applications or use, including but not
limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Information, or
providing them for non-residents, you must comply with all applicable export control laws and regulations in each country including
the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan, and follow the
procedures required by such applicable laws and regulations.
● Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including the
falling thereof, out of Sanken’s distribution network.
● Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is
error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting
from any possible errors or omissions in connection with the Information.
● Please refer to our official website in relation to general instructions and directions for using the Sanken Products, and refer to the
relevant specification documents in relation to particular precautions when using the Sanken Products.
● All rights and title in and to any specific trademark or tradename belong to Sanken and such original right holder(s).
DSGN-AEZ-16003
SUK3015-DSE Rev.1.2
SANKEN ELECTRIC CO., LTD.
Feb. 28, 2022
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
11
