KD60GB80

DIODE MODULE DD(KD)60GB40/80 UL;E76102 M） （ Power Diode Module DD60GB series are designed for various rectifier circuits. DD60GB has two diode chips connected in series and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 800V is avaiable for various input voltage. 26MAX 93.5MAX 80 3 2 + – 1 2- 6.5 ● Isolated ● Two mounting base elements in a package for simple (single and three phase) bridge connections ● Highly reliable glass passivated chips ● High surge current capability （Applications） Various rectifiers, Battery chargers, DC motor drives ３ 13 ~ 16.5 23 23 3M5 ２ ３ １ KD 21 ２ １ 30MAX DD Unit：a ■Maximum Ratings Symbol VRRM VRSM Symbol IF AV） （ IF (RMS) IFSM I2t Tj Tstg VISO Item Repetitive Peak Reverse Voltage Non-Repetitive Peak Reverse Voltage Item Average Forward Current R.M.S. Forward Current Surge Forward Current I2t Junction Temperature Storage Temperature Isolation Voltage Mounting Torque Mass Mounting M6） （ Terminal M5） （ A.C.1minute Recommended Value 2.5-3.9（25-40） Recommended Value 1.5-2.5（15-25） Ratings DD60GB40 400 480 Conditions （Tj＝25℃ unless otherwise specified） DD60GB80 800 960 Ratings 60 95 1100/1200 6000 −40 to ＋150 −40 to ＋125 2500 4.7（48） 2.7（28） 170 Unit V V Unit A A A A2S ℃ ℃ V N･m （㎏f･B） g Single phase, half wave, 180° conduction, Tc：114℃ Single phase, half wave, 180° conduction, Tc：114℃ 1 cycle, ／ 2 50/60HZ, peak value, non-repetitive Value for one cycle of surge current ■Electrical Characteristics Symbol IRRM VFM Item Repetitive Peak Reverse Current, max. Forward Voltage Drop, max. at VDRM, Conditions single phase, half wave. Tj＝150℃ Foward current 180A，Tj＝25℃，Inst. measurement Junction to case Ratings 20 1.25 0.50 Unit mA V ℃/W Rth j-c） Thermal Impedance, max. （ SanRex ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com DD(KD)60GB40/80 １３ ０ ５ Maximum Forward Characteristics Power Dissipation Pav W） （ １０ ２ １０ ０ ８ ０ ６ ０ ４ ０ ２ ０ Average Forward Current vs. Power Dissipation Per one element Forward Current （A） D.C. Max. Single Phase Three Phase ２ １ ０ ２ ５ ２ １ ０ 1 ５ ０６ ． ０８ ． １０ ． １２ ． １４ ． １６ ． １８ ． ２０ ． ２２ ． ０ ０ ２ ０ ４ ０ ６ ０ ８ ０ １０ ０ １０ ２ １０ ４ １０ ６ Forward Voltage Drop （V） Average Forward Current （A） Allowable Case Temperature Tc （℃） １０ ５ １０ ４ Average Forward Current vs. Allowable Case Temperature １０ ２０ Cycle Surge Forward Current Rating （Non-Repetitive） Per one element Ｔ= ５ ｊ２ ℃ start Per one element １０ ３ １０ ２ １０ １ １０ ０ Three Phase Surge Forward Current （A） １０ ００ ８０ ０ 60Hz ６０ ０ 50Hz ４０ ０ ２０ ０ ０ １ Single Phase D.C. ９ ０ ８ ０ ０ ２ ０ ４ ０ ６ ０ ８ ０ １０ ０ ２ ５ １ ０ ２ ０ ５ ０ １０ ０ Average Forward Current （A） Transient Thermal Impedance θ （℃/W） j-c Time （Cycles） Transient Thermal Impedance ０６ ． ０５ ． ０４ ． ０３ ． ０２ ． ０１ ． ０ １０ ２ ０ ５ １１ ０ Junction to Case Per one element Maximum １ −３ ２ ０ ５ １ −２ ２ ０ Time t sec） （ ５ １ −１ ２ ０ ５ １０ ０ Allowable Case Temperature （℃） Total Power Dissipation （W） Total Power Dissipation （W） Id Aav.） （ ５０ ０ ４０ ０ ３０ ０ ２０ ０ Rth:0.8C/W Rth:0.4C/W Rth:0.3C/W Rth:0.2C/W Rth:0.1C/W B6 ５０ ０ ４０ ０ Id Aav.） （ Rth:0.8C/W Rth:0.4C/W Rth:0.3C/W Rth:0.2C/W Rth:0.1C/W １０ １ １０ ２ １０ ３ B6 １０ １ B2 ３０ ０ ２０ ０ １０ ０ ０ ０ １０ ４ １０ ５ ７ １０ １５ １０ ５０ ２５ １０ ２ １０ ３ １０ ０ １０ ４ ５ １０ １０ ２０ ００ ５ ０ ０ ２ ５ ５ ０ １０ ５ ７ １０ １５ １０ ５０２５ ０ ５ １０ １０ ２０ ００５０ ０ ２ ５ ５ ０ Output Current （A） Ambient Temperature （℃） Output Current （A） Ambient Temperature （℃） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com Allowable Case Temperature （℃） ６０ ０ Output Current B； ２ Two Pluse Bridge connection ６０ ０ Output Current B ； pulse Bridge ６ Six connection