2SC5567

Ordering number:ENN6321 PNP/NPN Epitaxial Planar Silicon Transistors 2SA2014/2SC5567 DC/DC Converter Applications Applications · Relay drivers, lamp drivers, motor drivers, strobes. Package Dimensions unit:mm 2163 [2SA2014/2SC5567] 4.5 1.6 1.5 Features · Adoption of MBIT processes. · Large current capacitance. · Low collector-to-emitter saturation voltage. · High-speed switching. · Ultrasmall-sized package permitting applied sets to be made small and slim. · High allowable power dissipation. 3 0.5 0.4 1.5 3.0 0.75 2 1 0.4 1.0 2.5 4.25max Specifications ( ) : 2SA2014 Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (250mm2×0.8mm) Tc=25˚C 1 : Base 2 : Collector 3 : Emitter SANYO : PCP (Bottom view) Conditions Ratings (–)15 (–)15 (–)5 (–)9 (–)12 (–)1.2 1.3 3.5 150 –55 to +150 Unit V V V A A A W W ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(–)12V, IE=0 VEB=(–)4V, IC=0 VCE=(–)2V, IC=(–)500mA VCE=(–)2V, IC=(–)500mA VCB=(–)10V, f=1MHz 200 (220) 280 (90)50 Conditions Ratings min typ max (–)0.1 (–)0.1 560 MHz MHz pF Unit µA µA Marking : 2SA2014 : AU 2SC5567 : FD Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21000TS (KOTO) TA-2598 No.6321–1/5 2SA2014/2SC5567 Continued on preceding page. Parameter Symbol Conditions IC=(–)3A, IB=(–)60mA Collector-to-Emitter Saturation Voltage VCE(sat) IC=(–)4.5A, IB=(–)90mA Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time VBE(sat) IC=(–)3A, IB=(–)60mA (–)15 (–)15 (–)5 30 (120) 180 (14)25 Ratings min typ (–110) 120 (–160) 180 (–)0.85 max (–170) 180 (–240) 280 (–)1.2 Unit mV mV mV mV V V V V ns ns ns ns V(BR)CBO IC=(–)10µA, IE=0 V(BR)CEO IC=(–)1mA, RBE=∞ V(BR)EBO ton tstg tf IE=(–)10µA, IC=0 See specified Test Circuit See specified Test Circuit See specified Test Circuit Switching Time Test Circuit PW=20µs D.C.≤1% INPUT VR RB + + 100µF 470µF VBE=--5V VCC=5V 20IB1= --20IB2= IC=3A IB1 IB2 (For PNP, the polarity is reversed.) OUTPUT RL 50Ω --9 --8 IC -- VCE 2SA2014 --90mA A --80m 0mA --7 --60mA 9 8 IC -- VCE 2SC5567 90mA 80m A Collector Current, IC – A --7 --6 --5 --4 --3 --2 Collector Current, IC – A 7 70mA 60mA 50mA 40mA 30mA 20mA -- --40mA --30mA --20mA --10mA 5 4 3 2 1 10 0 10 0m m A --50mA 6 A 10mA IB=0 0 0.1 0.2 0.3 0.4 0.5 IT00171 --1 0 0 --0.1 --0.2 --0.3 --0.4 IB=0 --0.5 IT00170 0 Collector-to-Emitter Voltage, VCE – V --9 --8 Collector-to-Emitter Voltage, VCE – V 9 8 IC -- VBE 2SA2014 VCE=--2V IC -- VBE 2SC5567 VCE=2V Collector Current, IC – A --7 --6 --5 --4 --3 Collector Current, IC – A 7 6 5 4 3 2 1 0 0 25°C 25°C °C Ta=7 5 --25°C --2 --1 0 0 Ta=7 5°C 0.2 0.4 0.6 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 Base-to-Emitter Voltage, VBE – V IT00172 Base-to-Emitter Voltage, VBE – V 0.8 --25° C 1.0 1.2 1.4 IT00173 No.6321–2/5 2SA2014/2SC5567 1000 7 5 hFE -- IC Ta=75°C 25°C --25°C 2SA2014 VCE=--2V 1000 7 5 hFE -- IC 2SC5567 VCE=2V Ta=75°C --25°C 25°C DC Current Gain, hFE DC Current Gain, hFE 3 2 3 2 100 7 5 3 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 Collector Current, IC – A 5 7 --1.0 2 3 5 7 --10 IT00174 10 0.01 2 3 5 7 0.1 2 3 Collector Current, IC – A 5 7 1.0 2 3 5 7 10 IT00175 --1000 7 VCE(sat) -- IC 2SA2014 IC / IB=20 1000 7 VCE(sat) -- IC 2SC5567 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE (sat) – mV Collector-to-Emitter Saturation Voltage, VCE (sat) – mV 5 3 2 5 3 2 100 7 5 3 2 10 7 5 0.01 --100 7 5 3 2 --10 7 5 --0.01 = Ta °C 75 C 5° --2 25°C °C 75 a= T C 5° --2 25°C 2 3 5 7 --0.1 2 3 Collector Current, IC – A 5 7 --1.0 2 3 5 7 --10 IT00176 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC – A 1000 5 7 10 IT00178 --1000 7 VCE(sat) -- IC 2SA2014 IC / IB=50 VCE(sat) -- IC 2SC5567 IC / IB=50 7 Collector-to-Emitter Saturation Voltage, VCE (sat) – mV Collector-to-Emitter Saturation Voltage, VCE (sat) – mV 5 3 2 --100 7 5 3 2 --10 7 5 --0.01 2 3 5 7 --0.1 2 3 5 3 2 100 7 5 3 2 10 7 5 0.01 =7 Ta 5°C 5°C --2 25°C °C 75 a= T C 5° --2 25°C Collector Current, IC – A 5 7 --1.0 2 3 5 7 --10 IT00177 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC – A 10000 5 7 10 IT00179 --10000 7 VBE(sat) -- IC 2SA2014 IC / IB=50 VBE(sat) -- IC 2SC5567 IC / IB=50 7 Base-to-Emitter Saturation Voltage, VBE (sat) – mV Base-to-Emitter Saturation Voltage, VBE (sat) – mV 5 3 2 5 3 2 --1000 7 5 3 2 Ta=--25°C 75°C 25°C 1000 7 5 3 2 100 0.01 Ta=--25°C 75°C 25°C --100 --0.01 2 3 5 7 --0.1 2 3 Collector Current, IC – A 5 7 --1.0 2 3 5 7 --10 IT00180 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC – A 5 7 10 IT00181 No.6321–3/5 2SA2014/2SC5567 1000 7 5 Cob -- VCB 2SA2014 f=1MHz 1000 7 5 Cob -- VCB 2SC5567 f=1MHz Output Capacitance, Cob – pF Output Capacitance, Cob – pF 3 2 100 7 5 3 2 10 7 5 3 2 1.0 --1.0 2 3 5 7 --10 2 3 3 2 100 7 5 3 2 10 7 5 3 2 1.0 1.0 2 3 5 7 10 2 3 Collector-to-Base Voltage, VCB -- V 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 --0.01 IT00182 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 Collector-to-Base Voltage, VCB -- V IT00183 f T -- IC 2SA2014 VCE=--2V f T -- IC 2SC5567 VCE=2V Gain-Bandwidth Product, fT – MHz Gain-Bandwidth Product, fT – MHz 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC – A 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 5 7 --10 IT00184 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC – A 1.5 5 7 10 IT00185 ASO ICP IC PC -- Ta 2SA2014 / 2SC5567 10 s 0µ Collector Current, IC – A 10 DC Collector Dissipation, PC – W 10 op 1m s ms s n 1.3 M 1.0 50 s 0µ ou 0m nt ed era on tio ac er am ic bo ar d (2 0.5 50 m 0.01 0.1 2SA2014 / 2SC5567 Tc=25°C Single pulse For PNP, the minus sign (–) is omitted 2 3 5 7 1.0 2 3 5 7 10 2 3 m2 ×0 .8 m m ) 160 0 0 20 40 60 80 100 120 140 IT00186 Collector-to-Emitter Voltage, VCE – V 4.0 3.5 Ambient Temperature, Ta – ˚C IT00187 PC -- Tc 2SA2014 / 2SC5567 Collector Dissipation, PC – W 3.0 2.5 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 120 140 160 Case Temperature, Tc – ˚C IT01871 No.6321–4/5 2SA2014/2SC5567 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2000. Specifications and information herein are subject to change without notice. PS No.6321–5/5