2SC5639

Ordering number:ENN6467 NPN Triple Diffused Planar Silicon Transistor 2SC5639 Ultrahigh-Definition CRT Display Horizontal Deflection Output Applications Features · High speed (tf=100ns typ). · High breakdown voltage (VCBO=1500V). · High reliability (Adoption of HVP process). · Adoption of MBIT process. Package Dimensions unit:mm 2174 [2SC5639] 16.0 5.0 3.4 5.6 3.1 0.8 22.0 21.0 4.0 2.8 2.0 0.7 1 2 5.45 3.5 3 20.4 0.9 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Tc=25˚C 5.45 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PMLH Conditions 0.8 2.1 Ratings 1500 800 6 20 40 3 100 150 –55 to +150 Unit V V V A A W W ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Collector Cutoff Current Collector-to-Emitter Sustain Voltage Emitter Cutoff Current Collector Cutoff Current DC Current Gain Symbol ICES VCE=1500V, RBE=0 VCEO(sus) IC=100mA, IB=0 IEBO VEB=4V, IC=0 ICBO VCB=800V, IE=0 hFE1 hFE2 VCE=5V, IC=1A VCE=5V, IC=16A Conditions Ratings min 800 1.0 10 20 4 30 7 typ max 1.0 Unit mA V mA µA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71700TS (KOTO) TA-2592 No.6467–1/4 2SC5639 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Storage Time Fall Time Symbol VCE(sat) VBE(sat) tstg tf IC=16A, IB=4A IC=16A, IB=4A IC=12A, IB1=2.4A, IB2=–4.8A IC=12A, IB1=2.4A, IB2=–4.8A 0.1 Conditions Ratings min typ max 5 1.5 3.0 0.2 Unit V V µs µs Switching Time Test Circuit PW=20µs D.C.≤1% INPUT RB VR 50Ω + 100µF VBE=--2V + 470µF VCC=200V RL=16.7Ω IB1 IB2 OUTPUT 20 18 IC -- VCE 4.5A A 5.0 22 IC -- VBE VCE=5V Collector Current, IC – A Collector Current, IC – A 16 14 12 10 8 6 4 2 0 0 1 4.0A 3.5A 3.0A 2.5A 2.0A 1.5A 20 18 16 14 12 10 1.0A 0.5A 20° 0.2 0.4 C 6 4 2 0 0 0.6 0.8 1.0 1.2 1.4 IT01774 IB=0 Collector-to-Emitter Voltage, VCE – V 2 3 4 5 6 7 8 9 10 IT01773 Base-to-Emitter Voltage, VBE – V 7 5 3 hFE -- IC Collector-to-Emitter Saturation Voltage, VCE (sat) – V 7 VCE(sat) -- IC IC / IB=5 C Ta=120° VCE=5V 5 3 2 1.0 7 5 3 2 0.1 7 5 3 DC Current Gain, hFE 2 25°C --40°C 10 7 5 3 2 25°C Ta=--40° C 120°C 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 1.0 7 7 0.1 2 3 5 7 1.0 2 3 57 10 2 3 Collector Current, IC – A IT01775 Collector Current, IC – A Ta= 1 --40 °C 8 25°C IT01776 No.6467–2/4 2SC5639 7 5 SW Time -- IC tstg 10 7 SW Time -- IB2 ts tg Switching Time, SW Time – µs 3 2 Switching Time, SW Time – µs 5 3 2 VCC=200V IC=12A IB1=2.4A R load tf 1.0 7 5 3 2 tf 1.0 7 5 3 2 0.1 7 5 VCC=200V IC / IB1=5 IB2 / IB1=2 R load 7 0.1 2 3 5 7 Collector Current, IC – A 1.0 2 3 5 7 10 2 3 0.1 7 7 0.1 2 3 5 7 IT01777 7 5 Base Current, IB2 – A 1.0 2 3 5 7 2 10 IT01778 7 5 3 2 F.B A S O ICP=40A IC=20A R.B A S O L=100µH IB2=--5A Tc=25°C Single pulse 10 30 P C= 10 0W Collector Current, IC – A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 2 0µ s Collector Current, IC – A 71000 2 0µ 3 s 2 10 7 5 3 2 1.0 7 5 3 2 0.1 1m s op er ati on s 10m DC Tc=25°C Single pulse 3 5 7 10 2 3 5 7 100 2 3 5 5 7 Collector-to-Emitter Voltage, VCE – V 3.2 3.0 2.8 IT01779 140 Collector-to-Emitter Voltage, VCE – V 100 2 3 5 7 1000 2 3 IT01780 PC -- Ta Collector Dissipation, PC – W PC -- Tc Collector Dissipation, PC – W 120 2.4 100 N o 2.0 1.6 1.2 0.8 0.4 0 0 20 he at sin k 80 60 40 20 0 Ambient Temperature, Ta – °C 40 60 80 100 120 140 160 0 20 40 IT01781 Case Temperature, Tc – °C 60 80 100 120 140 160 IT01782 No.6467–3/4 2SC5639 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2000. Specifications and information herein are subject to change without notice. PS No.6467–4/4