2SC5823

Ordering number : ENN7785 2SC5823 NPN Triple Diffused Planar Silicon Transistor 2SC5823 Switching Regulator Applications Features • • • • Package Dimensions unit : mm 2045B [2SC5823] 6.5 5.0 4 High breakdown voltage. High-speed switching. Wide ASO. Adoption of MBIT process. 1.5 2.3 0.5 0.85 0.7 5.5 7.0 0.8 1.6 1.2 0.6 1 2 3 7.5 0.5 1 : Base 2 : Collector 3 : Emitter 4 : Collector 2.3 2.3 SANYO : TP unit : mm 2044B [2SC5823] 6.5 5.0 4 2.3 1.5 0.5 5.5 7.0 0.85 1 0.6 0.5 0.8 2 3 2.5 1.2 1.2 0 ‘0.2 1 : Base 2 : Collector 3 : Emitter 4 : Collector SANYO : TP-FA 2.3 2.3 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 63004CB TS IM TA-101180 No.7785-1/4 2SC5823 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg PW≤300µs, duty cycle≤10% Conditions Ratings 700 400 8 1.5 3 0.7 1.0 Tc=25°C 10 150 --55 to +150 Unit V V V A A A W W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Symbol ICBO IEBO hFE1 hFE2 hFE3 fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions VCB=400V, IE=0 VEB=5V, IC=0 VCE=5V, IC=0.1A VCE=5V, IC=0.7A VCE=5V, IC=1mA VCE=10V, IC=0.1A VCB=10V, f=1MHz IC=0.7A, IB=0.14A IC=0.7A, IB=0.14A IC=1mA, IE=0 IC=5mA, RBE=∞ IE=1mA, IC=0 IC=1A, IB1=0.2A, IB2=--0.4A,RL=200Ω, VCC=200V IC=1A, IB1=0.2A, IB2=--0.4A,RL=200Ω, VCC=200V IC=1A, IB1=0.2A, IB2=--0.4A,RL=200Ω, VCC=200V 700 400 8 0.5 2.5 0.25 20 10 10 20 10 0.8 1.5 MHz pF V V V V V µs µs µs Ratings min typ max 10 10 50 Unit µA µA Switching Time Test Circuit PW=20µs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω + 100µF VBE= --5V + 470µF VCC=200V RB RL 2.0 IC -- VCE 4 500mA 1.8 00mA 50mA 4 2.0 IC -- VBE VCE=5V Collector Current, IC -- A Collector Current, IC -- A 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 350mA 300mA 250mA 200mA 150mA 100mA 50mA 1.5 1.0 20mA 10mA 0.5 IB=0 0 1 2 3 4 5 6 7 8 9 10 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 IT06214 Collector-to-Emitter Voltage, VCE -- V IT06213 Base-to-Emitter Voltag, VBE -- V Ta= °C 25° C --40 °C 120 No.7785-2/4 2SC5823 3 2 100 hFE -- IC VCE=5V 10 7 5 VCE(sat) -- IC IC / IB=5 Ta=1 20°C 25°C Collector-to-Emitter Saturation Voltage, VCE(sat) -- V DC Current Gain, hFE 7 5 3 2 10 7 5 3 2 1.0 0.001 Ta=120°C 25°C --40°C 1.0 7 5 3 2 0.1 7 5 3 2 0.01 0.01 2 3 C Ta=--40° 120°C 25°C 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 0.1 2 3 5 7 1.0 2 --40° C 3 5 7 10 IT06216 3 2 Collector Current, IC -- A 5 3 2 IT06215 10 VBE(sat) -- IC Collector Current, IC -- A SW Time -- IC IC / IB=5 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Switching Time, SW Time -- µs 5 3 2 IC / IB1=5 IB2 / IB1=2 R load 25°C 1.0 7 5 3 2 tst g Ta= --40°C 120°C 1.0 7 5 3 2 tf 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 0.1 0.1 2 3 5 7 1.0 2 3 10 7 5 3 2 Forward Bias A S O ICP=3A IC=1.5A P C =1 0W Collector Current, IC -- A IT06217 10 7 5 Reverse Bias A S O Collector Current, IC -- A IT06218 P T= 30 10 s Collector Current, IC -- A 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 1 10 ms m s DC op er 0µ Collector Current, IC -- A 0µ s 3 2 1.0 7 5 3 2 0.1 7 5 3 2 ati on 0.001 1.0 Tc=25°C Single pulse 2 3 5 7 10 2 3 5 7 100 2 3 Collector-to-Emitter Voltage, VCE -- V 1.2 5 7 1000 IT06219 0.01 10 Tc=25°C IB2= --0.3A L=500µH, Single pulse 2 3 5 7 100 2 3 5 PC -- Ta Collector-to-Emitter Voltage, VCE -- V 12 7 1000 IT06220 PC -- Tc Collector Dissipation, PC -- W 0.8 Collector Dissipation, PC -- W 120 140 160 1.0 10 8 No 0.6 he at 6 sin k 0.4 4 0.2 2 0 0 20 40 60 80 100 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- °C IT06665 Case Temperature, Tc -- °C IT06222 No.7785-3/4 2SC5823 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2004. Specifications and information herein are subject to change without notice. PS No.7785-4/4