2SD2635

Ordering number:ENN6449 NPN Epitaxial Planar Silicon Darlington Transistor 2SD2635 120V / 2A Driver Applications Applications · Motor drivers, hammer drivers, and relay drivers. Package Dimensions unit:mm 2064A [2SD2635] 2.5 1.45 6.9 1.0 Features · Darlington connection · High DC current gain. · DC current gain is less affected by temperature. 4.5 1.0 0.6 1.0 0.9 1 2 3 0.5 0.45 2.54 2.54 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Base Sustain Voltage Emitter-to-Base Voltage Collector Current Collector Current (pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VCEO(sus) VEBO IC ICP PC Tj Tstg Conditions 1 : Emitter 2 : Collector 3 : Base SANYO : NMP Ratings 120 120 120 6 2 3 1 150 –55 to +150 4.0 1.0 Unit V V V V A A W ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Symbol ICBO IEBO hFE1 hFE2 hFE3 VCB=100V, IE=0 VEB=5V, IC=0 VCE=3V, IC=0.5A VCE=3V, IC=1A VCE=3V, IC=0.1A 1000 2000 300 30000 Conditions Ratings min typ max 10 2.5 Unit µA mA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92500TS (KOTO) TA-2846 No.6449–1/3 2SD2635 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Sustain Voltage Symbol VCE(sat) VBE(sat) IC=1A, IB=2mA IC=1A, IB=2mA 120 120 120 Conditions Ratings min typ max 1.5 2.0 Unit V V V V V V(BR)CBO IC=100µA, IE=0 V(BR)CEO IC=10mA, RBE=∞ VCEO(sus) IC=1A, L=10mH, Clamped Electrical Connection C B R1 R2 R1≈5kΩ R2≈500Ω E 2.0 IC -- VCE 350µA 400µA Collector Current, IC – A 2.2 2.0 1.8 1.6 1.4 1.2 1.0 IC -- VBE Collector Current, IC – A 1.6 300µA 250µA 1.2 200µA 150µA 0.8 100µA 0.4 0.6 0.4 0 0 1 2 3 4 IB=0 5 IT02069 0.2 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Collector-to-Emitter Voltage, VCE – V 10000 7 Base-to-Emitter Voltage, VBE – V 2 --25° C IT02070 0.8 hFE -- IC Collector–to–Emitter Saturation Voltage, VCE (sat) – V VCE(sat) -- IC IC / IB=500 5 3 DC Current Gain, hFE 2 1000 7 5 3 2 100 7 5 7 0.01 2 3 5 7 0.1 2 3 5 25°C = Ta 75 °C 1.5 --2 5° C 1.0 9 8 7 6 5 Ta= --25°C 25°C 75°C 7 1.0 2 3 5 7 0.1 2 3 5 Ta= 7 7 5°C 25°C Collector Current, IC – A IT02071 Collector Current, IC – A 1.0 2 3 IT02072 No.6449–2/3 2SD2635 3 VBE(sat) -- IC IC / IB=500 Base–to–Emitter Saturation Voltage, VBE (sat) – V 10 7 5 3 2 Forward Bias A S O ICP=3A IC=2A 10µs 100 Collector Current, IC – A 2 Ta= --25°C 1.5 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 10 ms ms 100 µs 1m s DC 25°C 75°C op era tio n 1.0 0.7 5 7 0.1 2 3 5 7 0.001 Ta=25°C 23 5 7 1.0 23 5 7 10 23 5 7100 23 Collector Current, IC – A 1.0 2 3 0.1 IT02073 Collector-to-Emitter Voltage, VCE – V 57 1000 IT02075 1.2 PC -- Ta Collector Dissipation, PC – W 1.0 0.8 0.6 0.4 0.2 0 0 20 Ambient Temperature, Ta – °C 40 60 80 100 120 140 160 IT02074 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2000. Specifications and information herein are subject to change without notice. PS No.6449–3/3