2SD2712

Ordering number : ENN8402 2SD2712 2SD2712 Applications • NPN Triple Diffused Planar Silicon Darlington Transistor Driver Applications Suitable for use in control motor drivers, printer hammer drivers, relay drivers, audio output and constant-voltage regulators. Features • • • • High DC current gain. Wide ASO. Low saturation voltage. Adoption of MBIT process. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Tc=25°C Conditions Ratings 180 160 6 10 16 2.5 110 150 --55 to +150 Unit V V V A A W W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector Sustain Voltage Symbol ICBO IEBO hFE fT VCE(sat) VBE(sat) V(BR)CBO VCEO(SUS) Conditions VCB=180V, IE=0A VEB=6V, IC=0A VCE=5V, IC=6.5A VCE=5V, IC=6.5A IC=5.5A, IB=11mA IC=5.5A, IB=11mA IC=1mA, IE=0A IC=100mA, IB=0A 180 160 Ratings min typ max 0.1 10 5000 15 1.5 2.3 MHz V V V V Unit mA mA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 81205CB MS IM TB-00001697 No.8402-1/3 2SD2712 Continued from preceding page. Parameter Turn-ON Time Storage Time Fall Time Symbol ton tstg tf Conditions See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min typ 0.9 8.0 3.0 max Unit µs µs µs Package Dimensions unit : mm 7503-003 15.6 14.0 4.8 3.2 2.0 Switching Time Test Circuit OUTPUT IB1 IB2 RB VR R1 + 20.0 100µF 0.6 T.U.T 2.6 3.5 PW=50µs D.C.≤1% 20.0 15.0 INPUT 1.2 RL R2 + 470µF VCC=50V 50Ω 1.6 2.0 1.0 1.3 VBE= --5V 1 23 0.6 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PB IC=500IB1=500IB2=6.5A 5.45 5.45 1.4 10 9 IC -- VCE from above 10mA 9mA 8mA 7mA 6mA 5mA 4mA 3mA 2mA 10 9 IC -- VBE VCE=5V Collector Current, IC -- A 7 6 5 4 3 2 1 0 0 1mA Collector Current, IC -- A 8 8 7 6 800µA 600µA 25°C 4 3 2 1 0 400µA IB=0µA 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Collector-to-Emitter Voltage, VCE -- V 100000 7 5 3 2 IT06685 10 hFE -- IC Base-to-Emitter Voltage, VBE -- V Ta= 1 --40°C 5 20° C IT06686 VCE(sat) -- IC VCE=5V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 5 3 2 IC / IB=500 DC Current Gain, hFE 10000 7 5 3 2 1000 7 5 3 2 100 0.1 2 3 5 Ta= °C 120 C 25° °C -40 - 25°C 1.0 7 5 3 2 Ta= --40°C 120°C 7 1.0 2 3 5 Collector Current, IC -- A 10 IT06687 7 0.1 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 7 10 IT06688 No.8402-2/3 2SD2712 5 VBE(sat) -- IC IC / IB=500 3 2 10 Forward Bias A S O ICP=16A IC=10A Base-to-Emitter Saturation Voltage, VBE(sat) -- V =1 PT Collector Current, IC -- A 3 7 5 3 2 1.0 7 5 3 10 m s 25°C 2 DC 10 m 0m s Ta= --40°C op s era tio 120° 1.0 n C 7 2 5 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 3.0 10 IT06689 7 0.1 1.0 Tc=25°C Single pulse 2 3 5 7 10 2 3 5 7 100 2 3 PC -- Ta Collector-to-Emitter Voltage, VCE -- V 140 IT06690 PC -- Tc Collector Dissipation, PC -- W Collector Dissipation, PC -- W 2.5 120 110 100 2.0 No 1.5 he at 80 sin k 60 1.0 40 0.5 20 0 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 0 Ambient Temperature, Ta -- °C IT06683 Case Temperature, Tc -- °C IT06684 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2005. Specifications and information herein are subject to change without notice. PS No.8402-3/3