3LP02N

Ordering number:ENN6553 P-Channel Silicon MOSFET 3LP02N Ultrahigh-Speed Switching Applications Features · Low ON-resistance. · Ultrahigh-speed switching. · 2.5V drive. Package Dimensions unit:mm 2178 5.0 4.0 [3LP02N] 4.0 0.45 0.5 0.6 2.0 5.0 0.45 0.44 1 2 3 14.0 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW≤10µs, duty cycle≤1% Conditions 1.3 1.3 1 : Source 2 : Drain 3 : Gate SANYO : NP Ratings –30 ±10 –0.2 –0.8 0.4 150 –55 to +150 Unit V V A A W ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Symbol V(BR)DSS IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 RDS(on)3 ID=–1mA, VGS=0 VDS=–30V, VGS=0 VGS=±8V, VDS=0 VDS=–10V, ID=–100µA VDS=–10V, ID=–100mA ID=–100mA, VGS=–4V ID=–50mA, VGS=–2.5V ID=–10mA, VGS=–1.5V –0.4 0.21 0.3 2.4 3.5 10 3.1 4.9 20 Conditions Ratings min –30 –10 ±10 –1.4 typ max Unit V µA µA V S Ω Ω Ω Marking : XD Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 81000TS (KOTO) TA-2010 No.6553-1/4 3LP02N Continued from preceding page. Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD VDS=–10V, f=1MHz VDS=–10V, f=1MHz VDS=–10V, f=1MHz See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit VDS=–10V, VGS=–10V, ID=–200mA VDS=–10V, VGS=–10V, ID=–200mA VDS=–10V, VGS=–10V, ID=–200mA IS=–200mA, VGS=0 Conditions Ratings min typ 28 15 5.2 24 75 200 150 2 0.25 0.35 –0.82 –1.2 max Unit pF pF pF ns ns ns ns nC nC nC V Switching Time Test Circuit 0V --4V VIN VIN VDD= --15V ID= --100mA RL=150Ω PW=10µs D.C.≤1% D G VOUT 3LP02N P.G 50Ω S --0.20 --0.18 --0.16 ID -- VDS 0V --0.40 --0.35 ID -- VGS VDS= --10V --4 . .0 V 5°C Ta= -2 0 --0.5 --1.0 --1.5 --2.0 --3 0V Drain Current, ID – A --2 --0.12 --0.10 --0.08 --0.06 --0.04 --0.02 0 0 --0.1 --0.2 --0.3 --0.4 . --2 0V --0.25 --0.20 --0.15 --0.10 --0.05 0 VGS= --1.5V 75° --2.5 .5 V C --0.14 Drain Current, ID – A --3.5V --0.30 --6. 25°C --3.0 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --3.5 IT00238 Drain-to-Source Voltage, VDS – V 8 7 IT00237 Gate-to-Source Voltage, VGS – V 10 RDS(on) -- VGS Ta=25°C Static Drain-to-Source On-State Resistance, RDS (on) – Ω RDS(on) -- ID VGS= --4V Static Drain-to-Source On-State Resistance, RDS (on) – Ω 7 6 5 5 ID= --100mA 4 3 2 1 0 0 --1 --2 --50mA 3 Ta=75°C 25°C 2 --25°C Gate-to-Source Voltage, VGS – V --3 --4 --5 --6 --7 --8 --9 --10 1.0 --0.01 2 3 5 7 IT00239 Drain Current, ID – A --0.1 2 3 5 IT00240 No.6553-2/4 3LP02N 10 RDS(on) -- ID VGS= --2.5V 100 7 RDS(on) -- ID VGS= --1.5V Static Drain-to-Source On-State Resistance, RDS (on) – Ω Static Drain-to-Source On-State Resistance, RDS (on) – Ω 7 5 3 2 5 Ta=75°C 25°C --25°C Ta=75°C 10 7 5 3 2 3 25°C --25°C 2 1.0 --0.01 2 3 5 7 Drain Current, ID – A --0.1 2 3 5 IT00241 1.0 --0.001 2 3 5 7 Drain Current, ID – A --0.01 2 3 5 IT00242 7 RDS(on) -- Ta Forward Transfer Admittance, | yfs | – S 1.0 7 5 3 2 yfs -- ID VDS= --10V Static Drain-to-Source On-State Resistance, RDS (on) – Ω 6 5 4 --5 ID= 3 0m = --2 , V GS A .5V -Ta= 25°C 75°C --100 I D= mA = --4 , VGS .0V 0.1 7 5 3 2 25°C 2 1 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 0.01 --0.01 2 3 5 7 --0.1 2 3 5 IT00244 Ambient Temperature, Ta – ˚C --1.0 7 5 IT00243 1000 7 Drain Current, ID – A IF -- VSD VGS=0 SW Time -- ID VDD= --15V VGS= --4V 3 2 Switching Time, SW Time – ns 5 3 2 Forward Current, IF – A td(off) tf tr td(on) --0.1 7 100 7 5 3 2 Ta= 7 25°C 5 3 2 5°C --0.01 --0.4 --25° C --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 IT00245 10 --0.01 2 3 5 7 --0.1 2 3 Diode Forward Voltage, VSD – V 100 7 Drain Current, ID – A --10 --9 IT00246 Ciss, Coss, Crss -- VDS f=1MHz Gate-to-Source Voltage, VGS – V VGS -- Qg VDS= --10V ID= --200mA 5 --8 --7 --6 --5 --4 --3 --2 --1 Ciss, Coss, Crss – pF 3 2 Ciss Coss 10 7 5 3 2 1.0 0 --5 --10 --15 --20 --25 --30 IT00247 Crss 0 0 0.5 1.0 1.5 2.0 2.5 IT00248 Drain-to-Source Voltage, VDS – V Total Gate Charge, Qg – nC No.6553-3/4 3LP02N 0.5 PD -- Ta Allowable Power Dissipation, PD – W 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta – ˚C IT02000 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2000. Specifications and information herein are subject to change without notice. PS No.6553-4/4