6358NT

Ordering number : EN5234D LA6358N,6358NS, LA6358NM,6358NT Overview Monolithic Linear IC High-Performance Dual Operational Amplifiers The LA6358 is a high-performance dual operational amplifier that can operate from a single voltage power supply. It features a built-in phase correction circuit. It can also operate from a dual power supply with both positive and negative levels and features low power consumption. The LA6358NT can be used in a wide range of industrial applications as a transducer amplifier for all types of transducers, as a DC amplifier circuit, and for other purposes as well. Functions • Eliminates need for phase compensation • Wide range of operating supply voltage : 3.0V to 30.0V (single power supply) : ±1.5 to ±15.0V (dual power supply) • Input voltage swingable down to nearly ground level and output voltage range VOUT of 0 to VCC-1.5V • Low current dissipation : ICC = 0.5mA typ/VCC = +5V, RL = ∞ Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Differential input voltage Maximum input voltage Allowable power dissipation Symbol VCC max VID VIN max Pd max Ta ≤ 25°C LA6358N, 6358NS Ta ≤ 25°C LA6358NM Ta ≤ 25°C LA6358NT Operating temperature Storage temperature Topr Tstg Conditions Ratings 32 32 -0.3 to +32 570 300 170 -30 to +85 -55 to +125 Unit V V V mW mW mW °C °C Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 71410 SY/53007 MS IM / D1306 MS PC B8-4681,B8-7410 No.5234-1/7 LA6358N, 6358NS, 6358NM, 6358NT Electrical Characteristics at Ta = 25°C, VCC = 5.0V, Otherwise unless specified. Parameter Input offset voltage Input offset current Input bias current Common-mode input voltage range Common-mode rejection ratio Large-amplitude voltage gain Output voltage range Supply voltage rejection ratio Channel separation Current drain Output current (source) Output current (sink) ICC IO source IO sink VIN+ = 1V, VIN- = 0V VIN+ = 0V, VIN- = 1V Symbol VIO IIO IB VICM CMR VG VOUT SVR f = 1kHz to 20kHz 6 7 8 9 10 20 10 VCC = 15V, RL ≥ 2kΩ IIN (+)/IIN (-) IIN (+)/IIN (-) Conditions Test Circuit min 1 2 3 4 4 5 0 65 25 0 65 100 120 0.5 40 20 1.2 80 100 VCC-1.5 Ratings typ ±2 ±5 45 max ±7 ±50 250 VCC-1.5 mV nA nA V dB V/mV V dB dB mA mA mA Unit Package Dimensions unit : mm (typ) 3001D 9.14 8 5 [LA6358N] unit : mm (typ) 3017D 22.0 [LA6358NS] 3.0 0.51 min 1 1.0 3.9MAX (3.0) 4 0.25 1 (0.84) 2.54 0.5 9 1.3 3.2 5.7 max 7.62 (4.5) 6.4 1.4 0.25 1.35 SANYO : SIP9 3.2 0.51MIN (0.76) 2.54 0.5 SANYO : DIP8(300mil) unit:mm (typ) 3245B 3.0 [LA6358NT] unit:mm (typ) 3032D 5.0 8 5 8 [LA6358NM] 3.0 4.9 4.4 6.4 1 0.63 2 0.65 0.25 (0.85) 1.1MAX (0.53) 0.125 1 (0.65) 1.27 4 0.35 0.15 (1.5) 1.7max 0.1 SANYO : MSOP8(150mil) SANYO : MFP8(225mil) 0.08 0.5 No.5234-2/7 LA6358N, 6358NS, 6358NM, 6358NT Pin Assignment VOUT1 1 8 VCC + -- + -- VIN--1 2 -- + + -- 7 VOUT2 1 2 3 4 5 6 7 8 9 Top view VIN+1 3 6 VIN--2 VCC GND VOUT1 VIN--1 VIN+1 VIN+2 VIN--2 VOUT2 VCC GND 4 5 VIN+2 Top view [LA6358NS] [LA6358N, 6358NM, 6358NT] Equivalent Circuit VCC VIN-INPUT VIN+ VOUT No.5234-3/7 LA6358N, 6358NS, 6358NM, 6358NT Test Circuits 1. VIO VCC -R1 + + NULL -+1.4V VEE C VF1 R2 VCC 2. IIO VCC -R1 R + + NULL -+1.4V VEE C VF2 R2 VCC R1 R1 R R2 R2 VIO = VF1 1+R2 / R1 IIO = VF2-VF1 R(1+R2 / R1) 3. IB VCC -R1 + + NULL -+1.4V VEE C VF3 R2 +1.4V VEE C R2 VCC VCC -R1 R + + NULL -VF4 R2 VCC R1 R R1 R2 IB = VF4-VF3 2R(1+R2 / R1) 4. CMR, VICM R2 VCC + + VEE NULL -VEE (EC1-EC2)(1+R2 / R1) CMR=20 log VF5-VF6 C VF5, VF6 R1 -R1 EC1, EC2 VCC R2 5. VG R1 -R1 VCC R2 VCC + + RL NULL -EK1, EK2 VEE C VF7, VF8 R2 VG= (EK1-EK2)(1+R2 / R1) VF8-VF7 No.5234-4/7 LA6358N, 6358NS, 6358NM, 6358NT 6. SVR R1 -R1 + VCC1 VCC2 R2 VCC + VF9, VF10 C R1 -R1 VCC R2 VCC + VF11, VF12 C R2 VEE NULL -VEE + VEE1, VEE2 NULL -VEE R2 SVR(+)=20 log (1+R2 / R1)(VCC1-VCC2) VF9-VF10 SVR(-)=20 log (1+R2 / R1)(VEE1-VEE2) VF11-VF12 7. CS R2 a c b VCC / 2 b a VIN VCC / 2 VCC / 2 VCC / 2 R1 -A + VCC RL R2 R1 -B + VCC RL A B Vo SW : b SW : a R2 VOA R1 VOB R2 VOB R1 VOA 8. ICC VCC A LA6358NS 9. IO source 10. IO sink VCC -+1V + A VO +1V -+ VCC A VO A LA6358N, LA6358NM, LA6358NT VCC 4.0 3.5 ICC -- VCC VCC ICC 100 IB -- VCC Current dissipation, ICC – mA 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 40 Input bias current, IB – nA 80 60 40 Ta = 0 to +70° C 20 -20°C 0 0 10 20 30 40 Supply voltage, VCC – V Supply voltage, VCC – V No.5234-5/7 LA6358N, 6358NS, 6358NM, 6358NT 60 55 IO(source) -- Ta 160 140 VG -- VCC Output current, IO(source) – mA 50 45 40 35 30 25 20 15 10 20 5 0 --20 0 --10 0 10 20 30 40 50 60 70 80 0 5 10 15 20 25 Voltage gain, VG – dB 120 100 80 60 40 RL=20kΩ 2kΩ 30 35 40 Ambient temperature, Ta – °C 24 VO -- f 15V 100kΩ 1kΩ Supply voltage, VCC – V 140 VG -- f VCC 120 Output voltage range, VOUT – Vp-p 10MΩ 20 0.1μF VIN VO Voltage gain, VG – dB 16 7V VIN 2kΩ VO 100 80 VCC 2 12 60 10 V CC to 15 =3 8 0V 40 V 4 20 0 2 3 5 10k 2 3 5 100k 2 3 5 1M 1 10 100 1k 10k 100k 1M 10M 0 1k Frequency, f – Hz Allowable power dissipation, Pd max – mW Frequency, f – Hz Allowable power dissipation, Pd max – mW 320 280 240 200 160 120 80 40 0 --40 700 Pd max -- Ta LA6358N,6358NS Pd max -- Ta LA6358NM 600 570 500 400 300 200 100 0 --40 --20 0 20 40 60 80 100 --20 0 20 40 60 80 100 Ambient temperature, Ta – °C Allowable power dissipation, Pd max – mW 200 Ambient temperature, Ta – °C Pd max -- Ta LA6358NT Independent IC 170 150 100 70 50 0 --40 --20 0 20 40 60 80 100 Ambient temperature, Ta – °C No.5234-6/7 LA6358N, 6358NS, 6358NM, 6358NT Sample Application Circuits Noninverting DC amplifier Inverting AC amplifier R4 100kΩ + +VIN -R2 1M +VO Rectangular wave oscillator R1 100kΩ CIN R1 10kΩ + -- Co VO R5 6.2kΩ R6 10kΩ 0.001μF C R2 100kΩ VCC + -R4 100kΩ VO R1 10kΩ R2 AV=1+ R1 VIN R2 100kΩ VCC C1 10μF R3 100kΩ R3 100kΩ AV= R4 R1 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2010. Specifications and information herein are subject t o change without notice. PS No.5234-7/7