CPH3114_11

Ordering number : ENN6394A CPH3114 / CPH3214 CPH3114 / CPH3214 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. ( ) : CPH3114 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2✕0.8mm) Conditions Ratings (--)15 (--)15 (--)5 (-)1.5 (--)3 (--)300 0.9 150 --55 to +150 Unit V V V A A mA mW °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Symbol ICBO IEBO hFE Conditions VCB=(--)12V, IE=0 VEB=(-)4V, IC=0 VCE=(--)2V, IC=(-)100mA 200 Ratings min typ max (--)0.1 (--)0.1 560 Unit μA μA Marking : CPH3114 : AP, CPH3214 : CP Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62504 TS IM TB-00000306 / 70500 TS (KOTO) TA-2786 No.6394-1/5 CPH3114 / CPH3214 Continued from preceding page. Parameter Gain-Bandwideth Product Output Capacitance Symbol fT Cob Conditions VCE=(-)2V, IC=(-)300mA VCB=(-)10V, f=1MHz IC=(--)750mA, IB=(--)15mA Collector-to-Emitter Saturation Voltage VCE(sat) IC=(--)1.5mA, IB=(--)30mA Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf IC=(--)750mA, IB=(--)15mA IC=(--)10μA, IE=0 IC=(--)1mA, RBE=∞ IE=(-)10μA, IC=0 See specified test circuit. See specified test circuit. See specified test circuit. Ratings min typ (350) 450 (17)9 (--120) 130 (--210) 240 (--)0.85 (--)15 (--)15 (--)5 (50)40 (90) 180 (15)20 (--180) 200 (--320) 360 (--)1.2 max Unit MHz MHz pF mV mV mV mV V V V V ns ns ns ns Package Dimensions unit : mm 2150A 0.2 2.9 0.4 3 0.6 0.15 Switching Time Test Circuit PW=20μs DC≤1% INPUT IB1 IB2 (For PNP, the polarity is reversed.) OUTPUT 1.6 2.8 0.05 50Ω VR RB + 220μF + 470μF RL 1 1.9 2 0.6 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 VBE= --5V VCC=5V 20IB1= --20IB2= IC=750mA 0.2 50m A CPH3114 --3 0 A mA --2.0 --1.8 --1.6 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 IC -- VCE mA --4 0 2.0 IC -- VCE CPH3214 --20mA 1.8 1.6 20 30 mA mA 10mA 8mA Collector Current, IC -- A Collector Current, IC -- A --50 m --10mA --8mA --6mA 1.2 1.0 0.8 0.6 0.4 0.2 40 1.4 mA 6mA 4mA --4mA --2mA 2mA IB=0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 IT01691 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 IB=0 0.9 1.0 Collector-to-Emitter Voltage, VCE -- V Collector-to-Emitter Voltage, VCE -- V IT01692 No.6394-2/5 CPH3114 / CPH3214 --1.0 --0.9 IC -- VBE CPH3114 VCE= --2V Collector Current, IC -- A 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 IC -- VBE CPH3214 VCE=2V Collector Current, IC -- A --0.8 --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT01693 Ta=75 °C 25°C --25°C 0 0.2 0.4 0.6 Ta=75°C 25°C --25°C 0.8 1.0 1.2 IT01694 Base-to-Emitter Voltage, VBE -- V 1000 7 5 hFE -- IC CPH3114 VCE= --2V 25°C DC Current Gain, hFE Base-to-Emitter Voltage, VBE -- V 1000 7 5 3 2 hFE -- IC 25°C Ta=75°C CPH3214 VCE=2V DC Current Gain, hFE 3 2 Ta=75 °C --25°C 100 7 5 3 2 --25°C 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 1000 IT01695 1000 f T -- IC Collector Current, IC -- A IT01696 f T -- IC Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 7 5 3 2 CPH3114 VCE= --2V 7 5 3 2 CPH3214 VCE=2V 100 7 5 3 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 100 7 IT01697 100 Cob -- VCB Collector Current, IC -- A IT01698 Cob -- VCB CPH3114 f=1MHz Output Capacitance, Cob -- pF 7 5 3 2 CPH3214 f=1MHz Output Capacitance, Cob -- pF 5 3 2 10 7 5 3 2 10 7 5 3 2 1.0 --1.0 1.0 2 3 5 7 --10 2 3 1.0 2 3 5 7 10 2 3 Collector-to-Base Voltage, VCB -- V IT01699 Collector-to-Base Voltage, VCB -- V IT01700 No.6394-3/5 CPH3114 / CPH3214 --1000 7 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 1000 VCE(sat) -- IC CPH3214 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 CPH3114 IC / IB=20 7 5 3 2 --100 7 5 3 2 100 7 5 3 2 25 °C Ta= °C 75 5°C --2 °C 25 Ta= 75 °C °C 5 --2 --10 7 5 --0.01 10 7 5 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A --1000 7 IT01701 1000 7 VCE(sat) -- IC Collector Current, IC -- A IT01702 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 CPH3114 IC / IB=50 5 3 2 CPH3214 IC / IB=50 75 --100 7 5 3 2 °C C 25° °C --25 Ta= 100 7 5 3 2 C 25° °C 75 Ta= °C --25 --10 7 5 --0.01 10 7 5 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A --10 7 IT01703 10 VBE(sat) -- IC Collector Current, IC -- A IT01704 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 3 2 Base-to-Emitter Saturation Voltage, VBE(sat) -- V CPH3114 IC / IB=50 7 5 3 2 CPH3214 IC / IB=50 --1.0 7 5 3 2 Ta= --25°C 1.0 7 5 3 2 25°C Ta= --25°C 75°C 25°C 75°C --0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 10 7 5 IT01705 1.4 ASO Collector Current, IC -- A IT01706 PC -- Ta CPH3114 / CPH3214 ICP=3A IC=1.5A DC 50 s CPH3114 / CPH3214 1.2 Collector Dissipation, PC -- W Collector Current, IC -- A 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 0.1 10 0μ 10 op 0m tio 10 1m m s 1.0 0.9 0.8 0μ s s Mo s un era ted on n ac 0.6 era mi cb oa 0.4 rd (60 Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) For PNP, minus sign is omitted. 2 3 5 7 1.0 2 3 5 7 10 2 3 0m 0.2 0 0 20 40 60 80 100 m2 ✕0 .8m m) 160 120 140 Collector-to-Emitter Voltage, VCE -- V IT01707 Ambient Temperature, Ta -- °C IT01708 No.6394-4/5 CPH3114 / CPH3214 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2004. Specifications and information herein are subject to change without notice. PS No.6394-5/5