CPH3121_11

Ordering number : ENN7219A CPH3121 / CPH3221 CPH3121 / CPH3221 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3121 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2✕0.8mm) Conditions Ratings (--)15 (--12)15 (--)5 (--)3 (--)5 (--)600 0.9 150 --55 to +150 Unit V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)12V, IE=0 VEB=(-)4V, IC=0 VCE=(--)2V, IC=(-)500mA VCE=(--)2V, IC=(-)500mA VCB=(--)10V, f=1MHz 200 (380)350 (40)23 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit μA μA Marking : CPH3121 : AS, CPH3221 : CS Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000309 / 80902 TS IM TA-100097, 3618 No.7219-1/5 CPH3121 / CPH3221 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1.5A, IB=(--)30mA IC=(--)1.5A, IB=(--)30mA IC=(--)10μA, IE=0 IC=(--)1mA, RBE=∞ IE=(-)10μA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (--)15 (--12)15 (--)5 (30)30 (90)210 (14)11 Ratings min typ (--)0.85 max (--)1.2 (--110)115 (--165)175 Unit mV V V V V ns ns ns Package Dimensions unit : mm 2150A 2.9 0.4 3 0.6 Switching Time Test Circuit 0.2 0.15 PW=20μs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω RB=1kΩ 0.6 1.6 2.8 0.05 RL 1 1.9 2 + 220μF + 470μF VCC=5V 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 0.2 VBE= --5V IC=20IB1= --20IB2=1.5A For PNP, the polarity is reversed. --200 --180 IC -- VCE --0 5.0 IC -- VCE 40m A 25m Collector Current, IC -- mA Collector Current, IC -- A --160 --140 --120 --100 --80 --60 --40 --20 0 0 A --0.7m A .8m A --0.6m A CPH3221 --0.5mA --0.4mA 4.5 4.0 20mA 15mA 3.5 3.0 --0.3mA --0.2mA --0.1mA 10mA 2.5 2.0 1.5 1.0 0.5 5mA 2mA 1mA IB=0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 CPH3121 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 IB=0 --4.5 --5.0 IT04582 0 Collector-to-Emitter Voltage, VCE -- V --2.0 --1.8 --1.6 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V 5.0 IT04583 IC -- VCE CPH3121 --14m --16m A A A --12m IC -- VCE mA 60 --10mA --8mA Collector Current, IC -- A 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 40m A CPH3221 25mA Collector Current, IC -- A 20mA --6mA 15mA 10mA --4mA --2mA 5mA IB=0 IB=0 --0.9 --1.0 IT04584 2mA 1mA 0.8 0.9 1.0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Collector-to-Emitter Voltage, VCE -- V Collector-to-Emitter Voltage, VCE -- V IT04585 No.7219-2/5 CPH3121 / CPH3221 --3.0 IC -- VBE CPH3121 VCE= --2V 3.0 IC -- VBE CPH3221 VCE=2V --2.5 2.5 Collector Current, IC -- A --2.0 Collector Current, IC -- A 2.0 --1.5 1.5 Ta=75 °C 25°C --25°C Ta=75 °C 0 0.2 0.4 0.6 --1.0 1.0 --0.5 0.5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT04586 0 0.8 1.0 1.2 IT04587 Base-to-Emitter Voltage, VBE -- V 1000 7 5 Base-to-Emitter Voltage, VBE -- V 1000 hFE -- IC CPH3121 VCE= --2V Ta=75°C 25°C hFE -- IC CPH3221 VCE=2V 7 5 DC Current Gain, hFE DC Current Gain, hFE 3 2 3 --25°C Ta=75°C 25°C --25°C 2 100 7 5 --0.01 100 7 5 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 Collector Current, IC -- A 1000 7 --10 IT04588 2 3 5 7 0.1 2 3 5 25°C --25°C 7 1.0 2 3 5 Collector Current, IC -- A 1000 7 10 IT04589 f T -- IC Gain-Bandwidth Product, f T -- MHz CPH3121 VCE= --2V f T -- IC CPH3221 VCE=2V Gain-Bandwidth Product, f T -- MHz 7 5 7 5 3 2 3 2 100 7 5 3 --0.01 100 7 5 3 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 100 IT04590 100 Collector Current, IC -- A IT04591 Cob -- VCB Cob -- VCB CPH3221 f=1MHz CPH3121 f=1MHz Output Capacitance, Cob -- pF 7 Output Capacitance, Cob -- pF 2 3 5 7 2 3 7 5 5 3 2 3 2 --1.0 10 --10 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V IT04592 Collector-to-Base Voltage, VCB -- V 7 100 IT04593 No.7219-3/5 CPH3121 / CPH3221 5 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3121 IC / IB=20 5 3 2 VCE(sat) -- IC CPH3221 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 --100 7 5 3 2 100 7 5 3 2 C =7 Ta -25° - C 5° °C 25 °C 25 C 5° =7 Ta C 5° --2 --10 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT04594 10 7 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 Collector Current, IC -- A 5 5 7 10 IT04595 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3121 IC / IB=50 VCE(sat) -- IC CPH3221 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 3 2 100 7 5 3 2 7 5 3 2 C 5° =7 Ta °C 5 --2 °C 25 Ta 5° =75 C °C 2 3 5 7 0.1 2 3 5 7 1.0 --100 °C 25 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 3 5 7 --10 IT04596 10 0.01 --2 2 3 VBE(sat) -- IC Collector Current, IC -- A 3 5 7 10 IT04597 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 CPH3121 IC / IB=50 2 CPH3221 IC / IB=50 --1.0 7 25°C Ta= --25°C 1.0 7 25°C Ta= --25°C 75°C 5 75°C 5 3 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 5 7 --10 IT04598 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 ASO Collector Current, IC -- A 10 7 5 5 7 10 IT04599 ASO ICP= --5A IC= --3A DC 1m s Collector Current, IC -- A Collector Current, IC -- A