CPH3122_11

Ordering number : ENN7220A CPH3122 / CPH3222 CPH3122 / CPH3222 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3122 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2✕0.8mm) Conditions Ratings (--30)40 (--)30 (--)5 (--)3 (--)5 (--)600 0.9 150 --55 to +150 Unit V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)30V, IE=0 VEB=(-)4V, IC=0 VCE=(--)2V, IC=(-)500mA VCE=(--)10V, IC=(-)500mA VCB=(--)10V, f=1MHz 200 (400)420 (25)20 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit μA μA Marking : CPH3122 : AT, CPH3222 : CT Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000300 / 41002 TS IM TA-100028,100030 No.7220-1/5 CPH3122 / CPH3222 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat)1 VCE(sat)2 VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1.5A, IB=(--)30mA IC=(--)1.5A, IB=(--)75mA IC=(--)1.5A, IB=(--)30mA IC=(--)10μA, IE=0 IC=(--)1mA, RBE=∞ IE=(-)10μA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (--30)40 (--)30 (--)5 (50)30 (270)300 (27)25 Ratings min typ (--)120 (--)0.83 max (--)180 (--)1.2 (--180)130 (--270)195 Unit mV mV V V V V ns ns ns Package Dimensions unit : mm 2150A 2.9 0.4 3 0.15 Switching Time Test Circuit 0.2 PW=20μs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω + 100μF + 470μF VCC=12V RB 0.6 1 1.9 2 0.6 1.6 2.8 0.05 RL =24Ω 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 0.2 VBE= --5V IC=20IB1= --20IB2=500mA For PNP, the polarity is reversed. 40mA 0m 20m CPH3122 A --40mA A A --2.0 --1.8 IC -- VCE 0 --2 --3 2.0 IC -- VCE 10m A mA --10mA 1.8 8mA 6mA 50mA Collector Current, IC -- A --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 Collector Current, IC -- A --50m --6mA 1.4 1.2 1.0 0.8 30 --1.6 --8mA 1.6 m A 4mA --4mA --2mA 2mA 0.6 0.4 0.2 IB=0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0 0 CPH3222 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 IB=0 0.9 1.0 IT04604 Collector-to-Emitter Voltage, VCE -- V --3.0 IT04603 3.0 IC -- VBE Collector-to-Emitter Voltage, VCE -- V IC -- VBE CPH3122 VCE= --2V --2.5 2.5 CPH3222 VCE=2V Collector Current, IC -- A --2.0 Collector Current, IC -- A 2.0 --1.5 1.5 --1.0 1.0 Ta=7 5°C 25°C --25°C --0.5 0.5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT04605 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT04606 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V Ta=7 5°C 25°C --25°C No.7220-2/5 CPH3122 / CPH3222 1000 7 5 hFE -- IC CPH3122 VCE= --2V 1000 7 5 hFE -- IC CPH3222 VCE=2V DC Current Gain, hFE DC Current Gain, hFE 3 2 Ta=75°C 25°C --25°C 3 Ta=75°C 25°C --25°C 2 100 7 5 100 7 0.01 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 1000 5 7 --10 IT04607 2 3 5 7 0.1 2 3 5 7 1.0 2 3 f T -- IC Collector Current, IC -- A 1000 5 7 10 IT04608 f T -- IC Gain-Bandwidth Product, f T -- MHz 5 Gain-Bandwidth Product, f T -- MHz 7 CPH3122 VCE= --10V 7 5 CPH3222 VCE=10V 3 2 3 2 100 7 5 --0.01 100 7 5 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 100 5 7 --10 IT04609 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Cob -- VCB Collector Current, IC -- A 7 5 7 10 IT04610 Cob -- VCB CPH3122 f=1MHz CPH3222 f=1MHz Output Capacitance, Cob -- pF 5 Output Capacitance, Cob -- pF 2 3 5 7 2 3 5 IT04611 7 5 3 3 2 2 10 --1.0 --10 10 1.0 2 3 5 7 10 2 3 5 IT04612 Collector-to-Base Voltage, VCB -- V 7 5 VCE(sat) -- IC Collector-to-Base Voltage, VCB -- V 5 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3122 IC / IB=20 3 2 CPH3222 IC / IB=20 3 2 100 7 5 3 2 --100 7 5 3 2 =7 Ta °C C 5° 25 -2 - C 5° C 5° =7 C Ta 5° --2 25 °C 10 7 5 0.01 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC -- A IT04613 Collector Current, IC -- A IT04614 No.7220-3/5 CPH3122 / CPH3222 3 2 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3122 IC / IB=50 7 5 3 2 VCE(sat) -- IC CPH3222 IC / IB=50 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 100 7 5 3 2 Ta= C 75° = Ta °C 75 C 5° --2 °C 5°C 2 --25 °C 25 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC -- A 3 IT04615 3 VBE(sat) -- IC Collector Current, IC -- A IT04616 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 Base-to-Emitter Saturation Voltage, VBE(sat) -- V CPH3122 IC / IB=50 CPH3222 IC / IB=50 2 --1.0 1.0 Ta= --25°C 7 Ta= --25°C 7 5 25°C 75°C 75°C 5 25°C 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC -- A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 IT04617 1.0 ASO 10 Collector Current, IC -- A IT04618 PC -- Ta Collector Dissipation, PC -- W ICP=5A IC=3A 10 0m