CPH3144

Ordering number : ENN8165 CPH3144 / CPH3244 CPH3144 / CPH3244 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT process. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3144 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--30)40 (--)30 (--)5 (--)2 (--)5 (--)400 0.9 150 --55 to +150 Unit V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)30V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(--)300mA VCB=(--)10V, f=1MHz 200 (440)400 (17)12 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit µA µA Marking : CPH3144 : BD, CPH3244 : DP Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2004EA TS IM TB-00000973 No.8165-1/4 CPH3144 / CPH3244 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1.5A, IB=(--)75mA IC=(--)1.5A, IB=(--)75mA IC=(--)10µA, IE=0 IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (--30)40 (--)30 (--)5 (45)40 (200)350 (23)30 Ratings min typ (-170)160 (--)0.94 max (--260)240 (--)1.2 Unit mV V V V V ns ns ns Package Dimensions unit : mm 2150A 2.9 0.4 3 Switching Time Test Circuit PW=20µs D.C.≤1% 0.2 0.15 IB1 OUTPUT IB2 VR 50Ω + 100µF + 470µF VCC=12V RB RL=24Ω 0.6 INPUT 0.05 1 1.9 2 0.6 1.6 2.8 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 VBE= --5V 0.2 IC=20IB1= --20IB2=500mA For PNP, the polarity is reversed. --2.0 --1.8 IC -- VCE CPH3144 --5 0 --4 0m -30 - mA --2 0mA 40mA A 2.0 IC -- VCE 15 mA mA --15mA --10mA 1.8 A Collector Current, IC -- A Collector Current, IC -- A --1.4 1.4 1.2 1.0 0.8 --8mA --1.2 50mA 30m --1.6 1.6 2 A 0m 10m A 8mA 6mA 4mA --6mA --1.0 --0.8 --0.6 --4mA --2mA 2mA 0.6 0.4 0.2 --0.4 --0.2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 IB=0 --1.8 --2.0 0 0 CPH3244 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IB=0 1.8 2.0 IT08908 Collector-to-Emitter Voltage, VCE -- V --2.00 --1.75 IT08907 2.00 1.75 Collector-to-Emitter Voltage, VCE -- V IC -- VBE CPH3144 VCE= --2V Collector Current, IC -- A IC -- VBE CPH3244 VCE=2V Collector Current, IC -- A --1.50 --1.25 --1.00 1.50 1.25 1.00 Ta=75 °C C 25°C --0.75 --0.50 --0.25 0 0 --0.2 --0.4 Ta=75 ° 0.75 0.50 0.25 0 --0.6 --0.8 --1.0 IT08909 0 0.2 0.4 0.6 0.8 --25°C --25°C 25°C 1.0 IT08910 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V No.8165-2/4 CPH3144 / CPH3244 1000 7 hFE -- IC CPH3144 VCE= --2V DC Current Gain, hFE 1000 7 hFE -- IC CPH3244 VCE=2V DC Current Gain, hFE 5 5 Ta=75°C 3 Ta=75°C 25°C --25°C 25°C 3 --25°C 2 2 100 7 --0.01 100 7 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 1000 IT08911 1000 Collector Current, IC -- A IT08912 f T -- IC Gain-Bandwidth Product, f T -- MHz CPH3144 VCE= --10V f T -- IC CPH3244 VCE=10V Gain-Bandwidth Product, f T -- MHz 7 5 7 5 3 3 2 2 100 7 5 --0.01 100 7 5 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 7 IT08913 7 5 Collector Current, IC -- A IT08914 Cob -- VCB Cob -- VCB CPH3244 f=1MHz CPH3144 f=1MHz Output Capacitance, Cob -- pF 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 Output Capacitance, Cob -- pF 5 3 3 2 2 10 7 10 --0.1 5 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 5 3 2 IT08915 5 VCE(sat) -- IC Collector-to-Base Voltage, VCB -- V IT08916 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V CPH3144 IC / IB=20 3 2 CPH3244 IC / IB=20 0.1 7 5 3 2 --0.1 7 5 3 2 = Ta 7 C 5° C 5° --2 25 °C = Ta 75 °C 25 °C --2 5°C 0.01 7 --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A IT08917 Collector Current, IC -- A IT08918 No.8165-3/4 CPH3144 / CPH3244 3 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V CPH3144 IC / IB=20 3 VBE(sat) -- IC CPH3244 IC / IB=20 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 2 --1.0 7 5 Ta= --25°C 1.0 7 5 Ta= --25°C 75°C 25°C 75°C 25°C 3 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 10 7 5 IT08919 1.0 0.9 ASO Collector Current, IC -- A IT08920 PC -- Ta ICP=5A