CPH3205

Ordering number : ENN6084D CPH3105 / CPH3205 PNP / NPN Epitaxial Planar Silicon Transistors CPH3105 / CPH3205 Applications • High-Current Switching Applications DC-DC converters relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of FBET, MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. ( ) : CPH3105 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--50)100 (--50)100 (--)50 (--)6 (--)3 (--)6 (--)600 0.9 150 --55 to +150 Unit V V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Symbol ICBO IEBO hFE Conditions VCB=(--)40V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(-)100mA Ratings min typ max (--)1 (--)1 200 560 Unit µA µA Marking : CPH3105 : AE, CPH3205 : CE Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company http://semicon.sanyo.com/en/network TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62005EA MS IM TB-00001407 / 63004 TS IM TB-00000304 / 41000 TS (KOTO) TA-2926 No.6084-1/5 CPH3105 / CPH3205 Continued from preceding page. Parameter Gain-Bandwideth Product Output Capacitance Symbol fT Cob VCE(sat)1 Collector-to-Emitter Saturation Voltage VCE(sat)2 Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf IC=(--)2A, IB=(-)100mA IC=(--)2A, IB=(-)100mA IC=(--)10µA, IE=0A IC=(--)100µA, RBE=0Ω IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0A See specified test circuit. See specified test circuit. See specified test circuit. (-50) 100 (-)50 100 (-)50 (--)6 (30)35 (230) 300 (15)22 Conditions VCE=(--)10V, IC=(--)500mA VCB=(--)10V, f=1MHz IC=(--)1A, IB=(--)50mA Ratings min typ (360) 380 (24)13 (--100) 80 (--185) 140 (--)0.88 (--200) 120 (--500) 210 (--)1.2 max Unit MHz MHz pF mV mV mV mV V V V V V V V ns ns ns ns Package Dimensions unit : mm 7015-003 0.4 0.15 0.6 Switching Time Test Circuit PW=20µs DC≤1% INPUT IB1 IB2 OUTPUT RB + 100µF + 470µF VCC=25V 3 0.2 1.6 2.8 0.05 50Ω VR RL 1 1.9 2.9 2 VBE= --5V 0.6 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 10IB1= --10IB2=IC=1A (For PNP, the polarity is reversed.) 0.2 --2.0 IC -- VCE CPH3105 0 --4 mA mA --30 mA --20 5.0 IC -- VCE CPH3205 100m A 4.5 4.0 3.5 3.0 2.5 2.0 1.5 80mA 60mA 40mA 20mA 10mA 5mA Collector Current, IC -- A --1.6 --1 --1.2 0mA --8mA --6mA --0.8 --4mA --2mA Collector Current, IC -- A --0.4 1.0 0.5 0 0 --0.2 --0.4 --0.6 IB=0mA --0.8 --1.0 IT08051 0 0 0.4 0.8 1.2 1.6 IB=0mA 2.0 IT08052 Collector-to-Emitter Voltage, VCE -- V Collector-to-Emitter Voltage, VCE -- V No.6084-2/5 CPH3105 / CPH3205 3.0 IC -- VBE CPH3105 VCE= --2V 3.0 IC -- VBE CPH3205 VCE=2V 2.5 2.5 Collector Current, IC -- A 2.0 Collector Current, IC -- A 2.0 1.5 1.5 0.5 0.5 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0 0.2 0.4 0.6 0.8 1.0 IT08054 Base-to-Emitter Voltage, VBE -- V 1000 7 5 IT08053 1000 hFE -- IC CPH3105 VCE= --2V Base-to-Emitter Voltage, VBE -- V hFE -- IC Ta=75°C Ta=75°C Ta=7 5 7 5 DC Current Gain, hFE 2 DC Current Gain, hFE 3 Ta=75°C 25°C --25°C 3 2 --25°C 25°C 100 7 5 3 2 100 7 5 3 2 10 0.01 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 25°C --25°C CPH3205 VCE=2V 7 1.0 2 --25°C °C 25°C 1.0 1.0 3 Collector Current, IC -- A 1000 IT08055 1000 f T -- IC Collector Current, IC -- A IT08056 f T -- IC Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 7 5 3 2 CPH3105 VCE= --10V 7 5 3 2 CPH3205 VCE=10V 100 7 5 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 100 7 5 3 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 100 IT08057 100 Cob -- VCB Collector Current, IC -- A IT08058 Cob -- VCB CPH3105 f=1MHz 7 CPH3205 f=1MHz Output Capacitance, Cob -- pF 5 Output Capacitance, Cob -- pF 2 3 5 7 2 3 5 7 7 5 3 2 3 10 7 5 3 2 10 --1.0 --10 2 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 57 IT08060 Collector-to-Base Voltage, VCB -- V IT08059 Collector-to-Base Voltage, VCB -- V No.6084-3/5 CPH3105 / CPH3205 --10000 7 5 3 2 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3105 IC / IB=20 1000 7 5 3 2 VCE(sat) -- IC CPH3205 IC / IB=20 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 2 3 100 7 5 3 2 7 Ta= 5°C °C --25 3 5 7 --1.0 2 3 5 7 --10 IT08061 = Ta 75 C 5° --2 °C 25 5 7 1.0 2 3 5 °C C 25° 5 7 --0.1 2 10 0.01 2 3 5 7 0.1 2 3 Collector Current, IC -- A --10000 7 5 3 2 VCE(sat) -- IC Collector Current, IC -- A 1000 IT08062 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3105 IC / IB=50 7 5 3 2 CPH3205 IC / IB=50 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 2 3 100 7 5 3 2 Ta °C =75 C ° --25 C 25° C 75° Ta= °C C --25 25° 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 5 7 --10 IT08063 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 VBE(sat) -- IC Collector Current, IC -- A 5 IT08064 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 3 2 CPH3105 IC / IB=50 3 2 CPH3205 IC / IB=50 --1000 7 5 3 2 Ta= --25°C 1000 7 5 3 2 Ta= --25°C 75°C 25°C 75°C 25°C --100 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 10 7 5 5 7 --10 IT08065 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 ASO Collector Current, IC -- A 1.0 0.9 IT08066 PC -- Ta ICP=6A Collector Dissipation, PC -- W CPH3105 / CPH3205 0µ 10 0.8 Collector Current, IC -- A 3 2 1.0 7 5 3 2 0.1 7 5 3 2 IC=3A 50 1m M s ou s 0µ s nt ed 10 10 ms 0.6 on ac DC 0m er s am ic op bo era tio 0.4 ar d n (6 00 0.01 0.1 CPH3105 / CPH3205 Ta=25°C Single pulse Mounted on a ceramic board(600mm2!0.8mm) For PNP, minus sign is omitted. 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 m m2 ! 0.2 0. 8m m ) 160 0 0 20 40 60 80 100 120 140 IT08067 Collector-to-Emitter Voltage, VCE -- V Ambient Temperature, Ta -- °C IT08068 No.6084-4/5 CPH3105 / CPH3205 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.6084-5/5