CPH3223

Ordering number : ENN7221A CPH3123 / CPH3223 CPH3123 / CPH3223 Applications • PNP / NPN Epitaxial Planar Silicon Transistors High-Current Switching Applications DC-DC converter, relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3123 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--50)100 (--50)100 (--)50 (--)6 (--)3 (--)6 (--)600 0.9 150 --55 to +150 Unit V V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(--)500mA VCB=(--)10V, f=1MHz 200 (390)380 (24)13 Ratings min typ max (-)1 (-)1 560 MHz pF Unit µA µA Marking : CPH3123 : AU, CPH3223 : CU Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000301 / 71002 TS IM TA-100095, 3619 No.7221-1/5 CPH3123 / CPH3223 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1A, IB=(--)50mA IC=(--)2A, IB=(-)100mA IC=(--)2A, IB=(-)100mA IC=(--)10µA, IE=0 IC=(--)100µA, RBE=0 IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (--50)100 (--50)100 (--)50 (--)6 (30)35 (230)300 (18)25 Ratings min typ max (--115)90 (--230)130 (--240)160 (--650)240 (--)0.88 (--)1.2 Unit mV mV V V V V V ns ns ns Package Dimensions unit : mm 2150A 2.9 0.4 3 0.6 Switching Time Test Circuit 0.2 0.15 PW=20µs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω RB 0.05 1.6 2.8 RL 0.6 1 1.9 2 + 100µF + 470µF VCC=25V 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 0.2 VBE= --5V IC=10IB1= --10IB2=1A For PNP, the polarity is reversed. --2.0 --1.8 IC -- VCE CPH3123 5.0 IC -- VCE CPH3223 0 --4 mA 0 --3 mA --20 mA 4.5 10 0mA 80mA 60mA Collector Current, IC -- A --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector Current, IC -- A --1.6 A --10m --8mA --6mA --4mA 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 40mA 20mA 10mA --2mA 5mA IB=0 --0.9 --1.0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IB=0 1.8 2.0 Collector-to-Emitter Voltage, VCE -- V --3.0 IT04564 3.0 IC -- VBE Collector-to-Emitter Voltage, VCE -- V IT04565 IC -- VBE CPH3123 VCE= --2V --2.5 2.5 CPH3223 VCE=2V Collector Current, IC -- A --2.0 Collector Current, IC -- A 2.0 --1.5 1.5 --1.0 1.0 °C 25°C --25°C --0.5 0.5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT04566 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT04567 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V Ta=7 5°C 25°C --25°C Ta=7 5 No.7221-2/5 CPH3123 / CPH3223 1000 7 5 hFE -- IC CPH3123 VCE= --2V DC Current Gain, hFE 1000 7 5 hFE -- IC CPH3223 VCE=2V DC Current Gain, hFE Ta=75°C 25°C 3 2 --25°C Ta=75°C 25°C 3 --25°C 2 100 7 5 --0.01 100 7 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 1000 IT04568 1000 7 f T -- IC Collector Current, IC -- A IT04569 f T -- IC Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 7 5 CPH3123 VCE= --10V 5 3 2 CPH3223 VCE=10V 3 2 100 7 5 3 2 100 7 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 100 IT04570 100 7 Cob -- VCB Collector Current, IC -- A IT04571 Cob -- VCB CPH3123 f=1MHz Output Capacitance, Cob -- pF CPH3223 f=1MHz Output Capacitance, Cob -- pF 7 5 5 3 2 3 2 10 7 10 --1.0 2 3 5 7 --10 2 3 5 Collector-to-Base Voltage, VCB -- V 5 3 7 --100 IT04572 5 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 VCE(sat) -- IC Collector-to-Base Voltage, VCB -- V 5 5 7 100 IT04573 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 CPH3123 IC / IB=20 3 2 CPH3223 IC / IB=20 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 100 7 5 3 2 5°C =7 Ta 5°C 25°C --2 Ta = 75 °C 2 3 5 7 0.1 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT04574 10 0.01 --2 3 °C 25 5° C 5 7 1.0 2 3 Collector Current, IC -- A 5 7 10 IT04575 No.7221-3/5 CPH3123 / CPH3223 7 5 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 CPH3123 IC / IB=50 7 5 3 2 VCE(sat) -- IC CPH3223 IC / IB=50 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 100 7 5 3 2 Ta= C 75° 5 --2 °C °C 75 a= T C 5°C 25° --2 C 25° 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT04576 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 3 VBE(sat) -- IC Collector Current, IC -- A 3 IT04577 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V CPH3123 IC / IB=50 CPH3223 IC / IB=50 2 2 --1.0 Ta= --25°C 1.0 Ta= --25°C 25°C 7 5 25°C 75°C 7 75°C 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 5 7 --10 IT04578 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 ASO ms Collector Current, IC -- A 1.0 0.9 5 7 10 IT04579 ICP=6A IC=3A 10