CPH3341

Ordering number : ENA0091 CPH3341 P-Channel Silicon MOSFET CPH3341 Features • • • General-Purpose Switching Device Applications Low ON-resistance. Ultrahigh-speed switching. 4V drive. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW≤10µs, duty cycle≤1% Mounted on a ceramic board (900mm2!0.8mm) Conditions Ratings --30 ±20 --5 --20 1.2 150 --55 to +150 Unit V V A A W °C °C Electrical Characteristics at Ta=25°C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Ciss Coss Crss td(on) tr td(off) tf Conditions ID=--1mA, VGS=0V VDS=-30V, VGS=0V VGS=±16V, VDS=0V VDS=-10V, ID=--1mA VDS=-10V, ID=-2.5A ID=--2.5A, VGS=-10V ID=--1A, VGS=-4V VDS=-10V, f=1MHz VDS=-10V, f=1MHz VDS=-10V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --30 --1 ±10 --1.2 3.7 6.2 35 67 1115 215 191 15 22 98 55 45 94 --2.6 typ max Unit V µA µA V S mΩ mΩ pF pF pF ns ns ns ns Marking : YQ Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92005PE MS IM TB-00001596 No. A0091-1/4 CPH3341 Continued from preceding page. Parameter Total Gate Charge Gate-to-Source Charge Gate-to-Drain “Miller” Charge Diode Forward Voltage Symbol Qg Qgs Qgd VSD Conditions VDS=--10V, VGS=-10V, ID=--5A VDS=--10V, VGS=-10V, ID=--5A VDS=--10V, VGS=-10V, ID=--5A IS=--5A, VGS=0V Ratings min typ 21.8 3.3 4.9 --0.85 --1.2 max Unit nC nC nC V Package Dimensions unit : mm 7015-004 0.4 0.15 0.6 Switching Time Test Circuit VIN 0V --10V VIN PW=10µs D.C.≤1% VDD= --15V 3 0.2 ID= --2.5A RL=6Ω 0.6 1.6 2.8 0.05 D VOUT 1 1.9 2.9 2 G 0.7 0.9 1 : Gate 2 : Source 3 : Drain SANYO : CPH3 CPH3341 P.G 50Ω 0.2 S --5 ID -- VDS --12V --7 ID -- VGS VDS= --10V --6V --4 V --6 --4 Drain Current, ID -- A Drain Current, ID -- A --15V --8V --5 --10 --3 V --4 Ta=7 5°C --0.5 --1.0 --1.5 --2.0 --2.5 --2 VGS= --3V --3 --2 --1 --1 0 0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --3.0 25° --3.5 C --25°C --4.0 Drain-to-Source Voltage, VDS -- V 140 IT10147 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V 120 IT10148 RDS(on) -- Ta Ta=25°C Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 120 100 100 ID= --1.0A --2.5A 80 80 -I D= 60 , VG 1.0A --4 S= V 60 40 40 2.5A I D= -- = --10 , V GS V 20 0 0 --2 --4 --6 --8 --10 --12 --14 IT10149 20 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 Gate-to-Source Voltage, VGS -- V Ambient Temperature, Ta -- °C IT10247 No. A0091-2/4 CPH3341 10 yfs -- ID VDS= --10V 25 Forward Transfer Admittance, yfs -- S 7 5 3 2 --10 7 5 3 2 IS -- VSD VGS=0V °C 1.0 7 5 3 2 = Ta --2 C 5° Source Current, IS -- A --1.0 7 5 3 2 75 °C 5°C 3 2 --0.01 7 5 0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Drain Current, ID -- A 3 2 5 7 --10 IT10151 3 2 --0.001 --0.2 --0.4 Ta= 7 --0.6 --25° C --0.8 25°C --0.1 7 5 --1.0 --1.2 IT10152 SW Time -- ID td(off) VDD= --15V VGS= --10V 3 2 Ciss, Coss, Crss -- VDS f=1MHz Diode Forward Voltage, VSD -- V Switching Time, SW Time -- ns 100 7 5 3 2 Ciss, Coss, Crss -- pF Ciss 1000 7 5 tf td(on) tr 3 2 10 7 5 --0.1 100 2 3 5 7 --1.0 2 3 5 --10 IT10302 5 3 2 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 0 0 2 4 6 8 10 12 14 16 18 20 22 7 0 --5 --10 Coss Crss --15 --20 --25 --30 IT10154 Drain Current, ID -- A --10 VGS -- Qg Drain-to-Source Voltage, VDS -- V ASO Gate-to-Source Voltage, VGS -- V VDS= --10V ID= --5A --8 IDP= --20A