CPH5504

Ordering number : ENN6793A CPH5504 CPH5504 Applications • NPN Epitaxial Planar Silicon Transistor High-Current Switching Applications DC-DC converter, relay drivers, lamp drivers, motor drivers, flash. Features • • • Composite type with 2 NPN transistors in one package facilitating high-density mounting. The CPH5504 is composed of 2 chips each equivaient to the CPH3205. Ultrasmall package facilitates miniaturization in end products. (mounting height : 0.9mm) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Total Power Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC PT Tj Tstg Conditions Ratings 100 100 50 6 3 6 600 0.9 1.2 150 -55 to +15 Unit V V V V A A mA W W °C °C Mounted on a ceramic board (600mm2!0.8mm) Mounted on a ceramic board (600mm2!0.8mm) Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE1 hFE2 fT Cob VCE(sat) VBE(sat) Conditions VCB=40V, IE=0A VEB=4V, IC=0A VCE=2V, IC=100mA VCE=2V, IC=3A VCE=10V, IC=500mA VCB=10V, f=1MHz IC=1A, IB=50mA IC=2A, IB=100mA IC=2A, IB=100mA Ratings min typ max 1 1 560 380 13 80 140 0.88 Unit µA µA 200 70 120 210 1.2 MHz pF mV mV V Marking : ED Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62005EA MS IM TB-00001409 / 21401 TS IM TA-2946 No.6793-1/4 CPH5504 Continued from preceding page. Parameter Collector-to-Base Breakdown Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=10µA, IE=0A IC=100µA, RBE=0Ω IC=1mA, RBE=∞ IE=10µA, IC=0A See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min 100 100 50 6 typ max Unit V V V V ns ns ns 35 300 22 Package Dimensions unit : mm 7017-003 0.4 0.15 Switching Time Test Circuit PW=20µs D.C.≤1% INPUT 0.2 IB1 IB2 OUTPUT 5 4 3 0.6 1.6 2.8 0.05 VR 50Ω RB + 100µF + 470µF RL 1 0.95 2.9 2 0.6 1 : Collector 2 : Collector 3 : Base 4 : Emitter Common 5 : Base SANYO : CPH5 VBE= --5V VCC=25V 0.2 10IB1= --10IB2=IC=1A Electrical Connection 5 4 3 0.7 0.9 1 : Collector 2 : Collector 3 : Base 4 : Emitter Common 5 : Base Top view 1 2 5.0 4.5 4.0 IC -- VCE 100m A 80mA 60mA 40mA 20mA 10mA 3.0 IC -- VBE VCE=2V 2.5 Collector Current, IC -- A 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0.4 0.8 1.2 Collector Current, IC -- A 2.0 1.5 1.0 5.0mA 0.5 IB=0mA 1.6 2.0 IT02464 0 0 0.2 0.4 0.6 0.8 1.0 IT02465 Collector-to-Emitter Voltage, VCE -- V Base-to-Emitter Voltage, VBE -- V Ta=75°C 25°C --25°C No.6793-2/4 CPH5504 1000 7 5 hFE -- IC VCE=2V 1000 f T -- IC VCE=10V Gain Bandwidth Product, f T -- MHz 2 3 5 7 2 3 7 5 3 2 Ta=75°C DC Current Gain, hFE 3 2 --25°C 25°C 100 7 5 3 2 100 7 5 3 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 10 0.01 2 3 5 7 0.1 1.0 Collector Current, IC -- A 100 7 IT02466 1000 Cob -- VCB Collector Current, IC -- A IT02467 VCE(sat) -- IC f=1MHz Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 5 3 2 IC / IB=20 Output Capacitance, Cob -- pF 5 3 2 100 7 5 3 2 10 7 5 3 2 0.1 = Ta --2 °C 75 C 5° 25 °C 2 3 5 7 1.0 2 3 5 7 10 2 3 57 IT02468 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector-to-Base Voltage, VCB -- V 1000 7 VCE(sat) -- IC Collector Current, IC -- A 5 IT02469 VBE(sat) -- IC IC / IB=50 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 5 3 2 3 2 1000 7 5 3 2 100 7 5 3 2 = Ta 7 5°C Ta= --25°C 75°C 25°C °C 2 --25 C 5° 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 10 7 5 IT02470 1.4 ASO Collector Current, IC -- A IT02471 PC -- Ta ICP=6A 10 Collector Dissipation, PC -- W Collector Current, IC -- A 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 IC=3A 1m s 1.2 10 0µ s 50 0µ DC 10 ms 1.0 0.9 0.8 op 0m To t s er s al ati on 1u 0.6 Di nit ss ip ati on 0.4 Ta=25°C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 1unit 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 0.2 0 0 Mounted on a ceramic board (600mm2!0.8mm) 20 40 60 80 100 120 140 160 0.1 Collector-to-Emitter Voltage, VCE -- V IT02472 Ambient Temperature, Ta -- °C IT02473 No.6793-3/4 CPH5504 1.0 PC(TR2) -- PC(TR1) Collector Dissipation, PC(TR2) -- W 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 Mounted on a ceramic board (600mm2!0.8mm) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Collector Dissipation, PC(TR1) -- W IT02474 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.6793-4/4