CPH5517

Ordering number : ENN8205 CPH5517 CPH5517 Applications • PNP / NPN Epitaxial Planar Silicon Transistor High-Current Switching Applications relay drivers, lamp drivers, motor drivers. Features • • • Composite type with a PNP/NPN transistor contained in package, facilitating high-density mounting. The CPH5517 consists of two chips which are equivalent to the CPH3116 and the CPH3216, respectively. Ultrasmall package permitting applied sets to be small and slime (mounting height : 0.9mm). Specifications ( ) : PNP Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) 1unit Conditions Ratings (--50)60 (--)50 (--)5 (--)1.0 (--)3 (--)200 0.9 150 --55 to +150 Unit V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwideth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(--)300mA VCB=(--)10V, f=1MHz 200 420 (9)6 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit µA µA Marking : EM Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21505 TS IM TB-00001151 No.8205-1/5 CPH5517 Continued from preceding page. Parameter Symbol Conditions IC=(--)500mA, IB=(--)10mA Collector-to-Emitter Saturation Voltage VCE(sat) IC=(--)300mA, IB=(--)6mA Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf IC=(--)500mA, IB=(--)10mA IC=(--)10µA, IE=0 IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0 See specified test circuit. See specified test circuit. See specified test circuit. Ratings min typ (--280) 130 (--145) 90 (--)0.81 (--50)60 (--)50 (--)5 (36)38 (173)332 (28)40 max (--430) 190 (--220) 135 (--)1.2 Unit mV mV mV mV V V V V ns ns ns Package Dimensions unit : mm 2242 0.4 5 4 3 0.6 0.2 Switching Time Test Circuit 0.15 PW=20µs DC≤1% INPUT IB1 IB2 OUTPUT RB + 100µF + 470µF 24Ω 1.6 2.8 0.05 50Ω VR 1 0.95 2.9 2 0.6 1 : Collector1 2 : Collector2 3 : Emitter2 4 : Base Common 5 : Emitter1 SANYO : CPH5 VBE= --5V VCC=25V 20IB1= --20IB2= IC=500mA For PNP, the polarity is reversed. 0.2 Electrical Connection 5 4 3 0.7 1 2 0.9 1 : Collector1 2 : Collector2 3 : Emitter2 4 : Base Common 5 : Emitter1 Top view --1000 IC -- VCE mA [PNP] --2 0mA 0 --4 mA --30 mA 1000 IC -- VCE 40mA 30mA 20mA [NPN] 10mA Collector Current, IC -- mA 50mA --1 --600 0mA Collector Current, IC -- mA --800 --5 0 8mA 6mA 4mA 800 --8mA --6mA --4mA --2mA 600 --400 400 2mA --200 200 0 0 --0.2 --0.4 --0.6 --0.8 IB=0 --1.0 IT01643 0 0 0.2 0.4 0.6 0.8 IB=0 1.0 IT01644 Collector-to-Emitter Voltage, VCE -- V Collector-to-Emitter Voltage, VCE -- V No.8205-2/5 CPH5517 --1.0 --0.9 IC -- VBE [PNP] VCE= --2V 1.0 0.9 0.8 IC -- VBE [NPN] VCE=2V Collector Current, IC -- A Collector Current, IC -- A --0.8 --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT01645 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT01646 Ta=7 5°C 25°C --25°C Base-to-Emitter Voltage, VBE -- V 1000 7 5 Base-to-Emitter Voltage, VBE -- V 1000 7 5 hFE -- IC [PNP] VCE= --2V hFE -- IC Ta=75°C Ta=7 5° C 25°C --25°C [NPN] VCE=2V Ta=75°C DC Current Gain, hFE DC Current Gain, hFE 3 2 3 2 --25°C --25°C 25°C 25°C 100 7 5 3 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 3 IT01647 Collector Current, IC -- A 5 3 IT01648 f T -- IC [PNP] VCE= --10V Gain-Bandwidth Product, f T -- MHz f T -- IC [NPN] VCE=10V Gain-Bandwidth Product, f T -- MHz 2 2 1000 7 5 3 2 100 7 5 3 1000 7 5 3 2 100 7 5 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 100 7 IT01649 Cob -- VCB Collector Current, IC -- A 100 7 IT01650 [PNP] f=1MHz Cob -- VCB [NPN] f=1MHz Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 5 3 2 5 3 2 10 7 5 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 IT01651 10 7 5 3 2 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 IT01652 Collector-to-Base Voltage, VCB -- V Collector-to-Base Voltage, VCB -- V No.8205-3/5 CPH5517 --1.0 7 VCE(sat) -- IC [PNP] IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 1.0 7 5 3 2 VCE(sat) -- IC [NPN] IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 3 2 --0.1 7 5 3 2 0.1 7 5 3 2 C 75° Ta= --25° C C 25° 7 Ta= 5°C C 7 0.1 --25° 2 3 5 °C 25 --0.01 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC -- A --1.0 7 --1.0 IT01653 7 0.01 0.01 2 3 5 VCE(sat) -- IC Collector Current, IC -- A 1.0 7 7 1.0 IT01654 [PNP] VCE(sat) -- IC [NPN] IC / IB=50 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 3 2 5 3 2 --0.1 7 5 3 2 7 Ta= --25° C 5°C 0.1 7 5 3 2 25° C 7 Ta= 5°C 25° C C --25° --0.01 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC -- A --10 7 --1.0 IT01655 7 0.01 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC -- A 10 7 7 1.0 IT01656 VBE(sat) -- IC [PNP] IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V VBE(sat) -- IC [NPN] IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 3 2 5 3 2 --1.0 7 5 3 2 Ta= --25°C 75°C 25°C 1.0 7 5 3 2 Ta= --25°C 75°C 25°C --0.1 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC -- A 5 3 2 --1.0 IT01657 7 0.1 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC -- A 1.4 7 1.0 IT01658 ASO [PNP / NPN] PC -- Ta [PNP / NPN] ICP=3A s s 0µ 0µ 10 50 Collector Current, IC -- A 1.0 7 5 3 2 0.1 7 5 3 2 IC=1A s m s Collector Dissipation, PC -- W 1m 1.2 10 1.0 0.9 0.8 M DC 10 ou op 0m nte s do er na ati ce on 0.6 ram ic bo ard 0.4 (60 0m 0.01 0.1 Ta=25°C Single pulse Mounted on a ceramic board (600mm2!0.8mm) For PNP, minus sign is omitted 2 3 5 7 1.0 2 3 5 7 10 2 3 57 IT09272 0.2 0 0 20 40 60 80 100 m2 !0 .8 mm )1 un it 160 120 140 Collector-to-Emitter Voltage, VCE -- V Ambient Temperature, Ta -- °C IT01660 No.8205-4/5 CPH5517 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2005. Specifications and information herein are subject to change without notice. PS No.8205-5/5