CPH5705

Ordering number : ENN6591 CPH5705 TR : PNP Epitaxial Planar Silicon Transistor SBD : Sohottky Barrier Diode CPH5705 DC / DC Converter Applications Features • Package Dimensions unit : mm 2156 [CPH5705] 2.9 5 4 3 • 1 0.95 2 0.4 0.6 1.6 2.8 • Composite type with a PNP transistor and a Schottky barrier diode contained in one package facilitating high-density mounting. The CPH5705 consists of two chips which are equivalent to the CPH3109 and the SBS004, respectively. Ultrasmall package facilitates miniaturization in end products. 0.6 0.05 0.2 0.15 1 : Cathode 2 : Collector 3 : Base 4 : Emitter 5 : Anode SANYO : CPH5 Ratings -30 -30 --5 --3 --5 --600 Unit V V V A A mA W °C °C V V A A °C °C 0.2 Specifications Absolute Maximum Ratings at Ta=25°C Parameter [TR] Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature [SBD] Repetitive Peak Reverse Voltage Non-repetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Marking : PE VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1cycle VCBO VCEO VEBO IC ICP IB PC Tj Tstg Symbol Conditions 0.4 Mounted on a ceramic board (600mm2!0.8mm) 0.7 0.9 0.9 150 --55 to +125 15 15 1 10 --55 to +125 --55 to +125 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 61500 TS IM TA-2903 No.6591-1/5 CPH5705 Electrical Characteristics at Ta=25°C Parameter [TR] Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time [SBD] Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance VR VF 1 VF 2 IR C trr Rth j-a IR=1mA IF=0.5A IF=1A VR=6V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit Mounted on a ceramic board (600mm2!0.8mm) 15 0.30 0.35 42 15 110 0.35 0.40 500 V V V µA pF ns °C/W ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf VCB=--12V, IE=0 VEB=--4V, IC=0 VCE=--2V, IC=--0.5A VCE=--2V, IC=--0.5A VCB=--10V, f=1MHz IC=--1.5A, IB=--30mA IC=--1.5A, IB=--30mA IC=--10µA, IE=0 IC=--1mA, RBE=∞ IE=--10µA, IC=0 See specified Test Circuit See specified Test Circuit See specified Test Circuit --30 --30 --5 50 270 25 200 380 25 --155 --0.83 --230 --1.2 --0.1 --0.1 560 MHz pF mV V V V V ns ns ns µA µA Symbol Conditions Ratings min typ max Unit Electrical Connection A E B C C (Top view) Switching Time Test Circuit [TR] PW=20µs D.C.≤1% INPUT RB VR 50Ω + 220µF + 470µF IB2 IB1 OUTPUT trr Test Circuit [SBD] 100mA Duty≤10% 50Ω 100Ω 10Ω RL 100mA 10µs –5V VBE=5V VCC= –5V –20IB1= 20IB2= IC= –1.5A trr No.6591-2/5 10mA CPH5705 --2.0 IC -- VCE --30mA --40mA --50m A [TR] --4.0 IC -- VBE [TR] VCE= --2V --2 0 mA --10mA --3.5 Collector Current, IC -- A Collector Current, IC -- A --1.6 --8mA --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 --6mA --4mA --1.2 --0.8 --2mA --0.4 0 0 --200 --400 --600 --800 IB=0 --1000 IT02116 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT02117 Collector-to-Emitter Voltage, VCE -- mV 1000 7 5 hFE -- IC Base-to-Emitter Voltage, VBE -- V 1000 7 [TR] VCE= --2V f T -- IC Ta=75 °C 25°C --25°C [TR] VCE= --10V Ta=75°C Gain-Bandwidth Product, f T -- MHz 5 3 2 DC Current Gain, hFE 3 2 25°C --25°C 100 7 5 3 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 2 5 7 --10 IT02118 10 --10 2 3 5 7 --100 2 3 5 7 --1000 2 3 Collector Current, IC -- mA --1.0 7 5 IT02119 Cob -- VCB [TR] f=1MHz VCE(sat) -- IC [TR] IC / IB=20 Collector -to-Emitter Saturation Voltage, VCE(sat) -- V Output Capacitance, Cob -- pF 100 7 5 3 2 --0.1 7 5 3 2 C 75° Ta= °C C 25 25° -- 3 2 --0.01 7 5 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT02121 10 --1.0 2 3 5 7 --10 2 3 5 IT02120 --0.001 --0.01 Collector-to-Base Voltage, VCB -- V --10 7 5 VCE(sat) -- IC Collector Current, IC -- A --10 7 [TR] IC / IB=50 VBE(sat) -- IC [TR] IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 2 3 5 7 --0.1 5 3 2 --1.0 7 5 3 2 Ta= --25°C Ta= 5°C °C 2 --25 C 75° 75°C 25°C --0.01 --0.01 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT02122 --0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT02123 No.6591-3/5 CPH5705 --10 7 5 ASO ICP= --5A IC= --3A 0µ 10 [TR] 1.0 0.9 PC -- Ta M [TR] Collector Current, IC -- A s 10 m Collector Dissipation, PC -- W 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 1m 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 ou 0µ 50 s s nt DC 10 s ed on op 0m ac era s er am tio ic n bo ar d (6 00 m m2 ! 0. --0.01 --0.1 Ta=25°C Single pulse Mounted on ceramic board (600mm2!0.8mm) 2 3 5 7 --1.0 2 3 5 7 --10 2 3 8m m ) Collector-to-Emitter Voltage, VCE -- V 10 7 5 3 2 1.0 7 5 3 2 5 7 --100 IT02124 0 20 40 60 80 100 120 140 160 Ambient Tamperature, Ta -- °C 100 7 5 3 2 IT02125 IF -- VF [SBD] Ta=125°C IR -- VR [SBD] Reverse Current, IR -- mA Forward Current, IF -- A 75 °C 10 C 5° 0° C 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 0 100°C 75°C 50°C 3 2 0.01 0 0.1 25° 0.2 C 0.1 7 5 12 50 °C Ta = 25°C 0.3 0.4 0.5 IT02126 5 10 15 IT02127 Forward Voltage, VF -- V Average Forward Power Dissipation, PF(AV) -- W 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8 1.0 PF(AV) -- IO Reverse Voltage, VR -- V [SBD] qRectangular wave θ=60° wRectangular wave θ=120° eRectangular wave θ=180° rSine wave θ=180° q we r Rectangular wave θ 360° Sine wave 180° 360° 1.2 1.4 IT02128 Average Rectified Current, IO -- A No.6591-4/5 CPH5705 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2000. Specifications and information herein are subject to change without notice. PS No.6591-5/5