CPH6020

Ordering number : ENA1548 CPH6020 SANYO Semiconductors DATA SHEET CPH6020 Features • • • NPN Epitaxial Planar Silicon Transistor High-Frequency Low-Noise Amplifier Low-noise use : NF=1.2dB typ (f=1GHz). High cut-off frequency : fT=16GHz typ (VCE=5V). High gain : |S21e|2=13.5dB typ (f=1GHz). Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to- Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg When mounted on ceramic substrate (250mm2×0.8mm) Conditions Ratings 15 8 2 150 700 150 --55 to +150 Unit V V V mA mW °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Forward Transfer Gain Noise Figure Symbol ICBO IEBO hFE fT | S21e | NF 2 Conditions VCB=5V, IE=0A VEB=1V, IC=0A VCE=5V, IC=50mA VCE=5V, IC=50mA VCE=5V, IC=50mA, f=1GHz VCE=1V, IC=10mA, f=1GHz Ratings min typ max 1.0 1.0 60 13 10 16 13.5 1.2 1.8 150 Unit μA μA GHz dB dB Marking : GT Notre) Pay attention to handling since it is liable to be affected by static electricity due to the high-frequency process adopted. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. www.semiconductor-sanyo.com/network 91609AB TK IM TC-00002073 No. A1548-1/4 CPH6020 Package Dimensions unit : mm (typ) 7018A-002 Marking 6 5 4 2.9 0.6 6 5 4 0.15 2.8 1.6 0.05 0.2 1 2 3 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector Top view 0.6 1 2 0.95 3 0.4 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector SANYO : CPH6 0.9 0.2 GT 140 120 IC -- VCE 1.5mA 150 IC -- VBE VCE=1V 0 0.2 0.4 0.6 0.8 Collector Current, IC -- mA 100 80 60 40 0.9mA 90 0.6mA 60 0.3mA 30 20 0 IB=0mA 0 2 4 6 8 IT14950 0 5V 1.0 1.2mA Collector Current, IC -- mA 120 1.2 IT14951 Collector-to-Emitter Voltage, VCE -- V 3 hFE -- IC Base-to-Emitter Voltage, VBE -- V 5 Cre -- VCB f=1MHz 2 Reverse Transfer Capacitance, Cre -- pF 3 5 7 100 2 3 3 DC Current Gain, hFE 2 100 VCE=5V 1V 7 1.0 5 7 5 0.1 3 1.0 2 3 5 7 10 2 2 3 5 7 1.0 2 3 5 Collector Current, IC -- mA IT14952 Collector-to-Base Voltage, VCB -- V 7 10 IT14953 No. A1548-2/4 CPH6020 2 Cob -- VCB f=1MHz 5 f T -- IC VCE=5V f=1GHz Gain-Bandwidth Product, f T -- GHz 7 Output Capacitance, Cob -- pF 1.0 10 7 5 3 2 7 5 3 1.0 2 0.1 2 3 5 7 1.0 2 3 5 Collector-to-Base Voltage, VCB -- V 16 |S21e|2 -- IC 10 IT14954 7 7 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 4 NF -- IC IT14955 Forward Transfer Gain, |S21e|2 -- dB 14 12 10 VCE=5V f=1GHz f=1GHz Noise Figure, NF -- dB 3 2 8 6 VCE=1V 1 5V 4 2 1.0 0 1.0 2 3 5 7 10 2 3 5 7 100 2 3 2 3 5 7 10 2 3 5 Collector Current, IC -- mA 800 700 600 500 400 300 200 100 0 IT14956 PC -- Ta Collector Current, IC -- mA 7 100 IT14957 When mounted on ceramic substrate (250mm2×0.8mm) Collector Dissipation, PC -- mW 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- °C IT14958 No. A1548-3/4 CPH6020 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2009. Specifications and information herein are subject to change without notice. PS No. A1548-4/4