CPH6074

Ordering number : ENA1474 CPH6074 SANYO Semiconductors DATA SHEET CPH6074 Features • • • • PNP Epitaxial Planar Silicon Transistor For VHF frequency conversion, local oscillation High cut-off frequency (fT=1.2GHz typ). Low Cob (Cob=1.2pF typ). The two chips contained are equivalent to the 2SA1778. Composite type with 2 devices contained in one package, facilitating high-density mounting. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation Total Power Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC PC PT Tj Tstg When mounted on glass epoxy substrate 1unit When mounted on glass epoxy substrate Conditions Ratings -15 -15 -3 -50 300 500 150 -55 to +150 Unit V V V mA mW mW °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Reverse Transfer Capacitance Symbol ICBO IEBO hFE fT Cob Cre Conditions VCB= -15V, IE=0A VEB= -2V, IC=0A VCE= -10V, IC= -5mA VCE= -10V, IC= -5mA VCB= -10V, f=1MHz VCB= -10V, f=1MHz 60 0.6 1.2 1.2 0.9 1.7 Ratings min typ max -0.1 -0.1 120 GHz pF pF Unit μA μA Marking : GQ Note) The specifications shown above are for each individual transistor. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. www.semiconductor-sanyo.com/network 51309AB MS IM TC-00001958 No. A1474-1/3 CPH6074 Package Dimensions unit : mm (typ) 7018A-006 Electrical Connection 6 5 4 2.9 0.6 6 5 4 0.15 2.8 1.6 0.05 1 2 3 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 Top view 0.6 1 2 0.95 3 0.4 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : CPH6 0.9 0.2 --30 IC -- VCE μA --300 A --250μ --200μA 0.2 --10 --9 IC -- VCE --120 μA A --100μ --80μA --60μA --25 Collector Current, IC -- mA Collector Current, IC -- mA --8 --7 --6 --5 --4 --3 --2 --1 --20 --15 --150μA --100μA --40μA --10 --5 --50μA --20μA 0 IB=0μA 0 --1 --2 --3 --4 --5 --6 --7 --8 --9 --10 --11 --12 --13 --14--15 0 IB=0μA 0 --1 --2 --3 --4 --5 --6 --7 --8 --9 --10 --11 --12 --13 --14--15 Collector-to-Emitter Voltage, VCE -- V --30 IC -- VBE IT14673 3 2 Collector-to-Emitter Voltage, VCE -- V hFE -- IC IT14674 VCE=--10V VCE=--10V --25 Collector Current, IC -- mA DC Current Gain, hFE --20 100 7 5 Ta=75°C 25°C --25°C Ta=75°C --15 --10 --25°C 25°C 3 2 --5 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --1.1 10 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 Base-to-Emitter Voltage, VBE -- V IT14675 Collector Current, IC -- mA IT14676 No. A1474-2/3 CPH6074 7 5 Cob -- VCB Reverse Transfer Capacitance, Cre -- pF f=1MHz 7 5 3 2 Cre -- VCB f=1MHz Output Capacitance, Cob -- pF 3 2 1.0 7 5 1.0 7 5 3 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 3 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 5 fT -- IC IT14677 600 Collector-to-Base Voltage, VCB -- V PT, PC -- Ta IT14678 VCE= --10V Collector Dissipation, PT, PC -- mW When mounted on glass epoxy substrate 500 Gain-Bandwidth Product, fT -- GHz 3 2 400 P TT ot 1.0 7 5 300 al Di ss ip 200 PC 1u ati on nit 3 2 --1.0 100 2 3 5 7 --10 2 3 5 7 0 0 20 40 60 80 100 120 140 160 Collector Current, IC -- mA IT14679 Ambient Temperature, Ta -- °C IT14680 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of May, 2009. Specifications and information herein are subject to change without notice. PS No. A1474-3/3