CPH6223

Ordering number : ENN7386 CPH6123 / CPH6223 PNP / NPN Epitaxial Planar Silicon Transistors CPH6123 / CPH6223 High-Current Switching Applications Applications • Package Dimensions unit : mm 2146A [CPH6123 / CPH6223] 0.2 0.05 2.9 6 5 4 0.15 DC-DC converter, relay drivers, lamp drivers, motor drivers, strobe. Features • • • • • 0.4 Specifications ( ) : CPH6123 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions 0.7 0.9 • Adoption of MBIT process. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. 0.6 1 2 0.2 3 0.95 0.6 1.6 2.8 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector SANYO : CPH6 Ratings (-50)100 (-50)100 (--)50 (-)6 (-)3 (-)6 (-)600 1.3 150 --55 to +150 Unit V V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(--)500mA VCB=(--)10V, f=1MHz Ratings min typ max (-)1 (-)1 200 (390)380 (24)13 560 MHz pF Unit µA µA Marking : CPH6123 : BA, CPH6223 : DA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62503 TS IM TA-3814, 3816 No.7386-1/5 CPH6123 / CPH6223 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1A, IB=(--)50mA IC=(--)2A, IB=(-)100mA IC=(--)2A, IB=(-)100mA IC=(--)10µA, IE=0 IC=(--)100µA, RBE=0 IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (-50)100 (-50)100 (--)50 (--)6 (30)35 (230)300 (18)25 Ratings min typ max (--115)90 (-230)130 (--240)160 (-650)240 (--)0.88 (--)1.2 Unit mV mV V V V V V ns ns ns Switching Time Test Circuit PW=20µs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω + 100µF VBE= --5V + 470µF VCC=25V RB RL IC=10IB1= --10IB2=1A For PNP, the polarity is reversed. --2.0 --1.8 --1.6 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 IC -- VCE CPH6123 0 --4 mA 5.0 IC -- VCE CPH6223 10 0mA 0 --3 mA --20 mA Collector Current, IC -- A 80mA 60mA 40mA 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 Collector Current, IC -- A A --10m --8mA --6mA 20mA 10mA --4mA --2mA 5mA IB=0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IB=0 1.8 2.0 Collector-to-Emitter Voltage, VCE -- V --3.0 IT04564 3.0 IC -- VBE Collector-to-Emitter Voltage, VCE -- V IT04565 IC -- VBE CPH6123 VCE= --2V --2.5 2.5 CPH6223 VCE=2V Collector Current, IC -- A Collector Current, IC -- A --2.0 2.0 --1.5 1.5 --1.0 1.0 Ta=7 5°C 25°C --25°C --0.5 0.5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT04566 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT04567 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V Ta=7 5°C 25°C --25°C No.7386-2/5 CPH6123 / CPH6223 1000 7 5 hFE -- IC CPH6123 VCE= --2V DC Current Gain, hFE Ta=75°C 1000 7 5 hFE -- IC CPH6223 VCE=2V DC Current Gain, hFE 25°C 3 2 --25°C Ta=75°C 25°C 3 --25°C 2 100 7 5 --0.01 100 7 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 1000 IT04568 1000 7 Collector Current, IC -- A IT04569 f T -- IC f T -- IC CPH6223 VCE=10V Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 5 7 5 CPH6123 VCE= --10V 5 3 2 3 2 100 7 5 3 2 100 7 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 100 IT04570 100 7 Cob -- VCB Collector Current, IC -- A IT04571 Cob -- VCB CPH6123 f=1MHz Output Capacitance, Cob -- pF CPH6223 f=1MHz Output Capacitance, Cob -- pF 7 5 5 3 2 3 2 10 7 10 --1.0 2 3 5 7 --10 2 3 5 Collector-to-Base Voltage, VCB -- V 5 3 7 --100 IT04572 5 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 VCE(sat) -- IC Collector-to-Base Voltage, VCB -- V 5 5 7 100 IT04573 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 CPH6123 IC / IB=20 3 2 CPH6223 IC / IB=20 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 100 7 5°C =7 Ta 5°C 25°C --2 Ta = 75 5 3 2 °C 2 3 5 7 0.1 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 IT04574 10 0.01 --2 25 3 5° °C C 5 7 1.0 2 3 Collector Current, IC -- A 5 7 10 IT04575 No.7386-3/5 CPH6123 / CPH6223 7 5 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 CPH6123 IC / IB=50 7 5 3 2 VCE(sat) -- IC CPH6223 IC / IB=50 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 100 7 5 3 2 C 75° Ta= 5°C --2 25° 2 3 5 7 --0.1 2 C 5° =7 Ta C 5°C 25° --2 C 3 5 7 --1.0 2 3 5 7 --10 IT04576 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 3 Collector Current, IC -- A 3 IT04577 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V VBE(sat) -- IC CPH6223 IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V CPH6123 IC / IB=50 2 2 --1.0 Ta= --25°C 1.0 Ta= --25°C 25°C 7 5 25°C 75°C 7 75°C 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 5 7 --10 IT04578 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 5 7 10 IT04579 ASO ICP= --6A IC= --3A 1m s 50 10 ms 0µ s ASO ICP=6A IC=3A 1m s 50 10 ms 0µ s