CPH6530

Ordering number : EN8709 CPH6530 PNP / NPN Epitaxial Planar Silicon Transistor CPH6530 Applications • Low-Frequency General-Purpose Applications Muting circuit, relay drivers, lamp drivers, motor drivers. Features • • Composite type with a PNP / NPN transistor contained in one package, facilitating high-density mounting. Ultrasmall package permitting applied sets to be small and slim. Specifications ( ) : PNP Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Mounted on a ceramic board (600mm2!0.8m) 1unit Conditions Ratings (--15)60 (--12)50 (--)5 (--1)0.5 (--2)1 0.6 150 --55 to +150 Unit V V V A A W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO Conditions VCB=(--12)40V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(--)10mA VCE=(--2)10V, IC=(--)50mA VCB=(--)10V, f=1MHz IC=(--400)100mA, IB=(--20)10mA IC=(--400)100mA, IB=(--20)10mA IC=(--)10µA, IE=0A IC=(--)1mA, RBE=∞ IE=(--)10µA, IC=0A (--15)60 (--12)50 (--)5 Ratings min typ max (--)100 (--)100 300 (450)500 (6)2.8 (--120)50 (--240)100 (--)0.9 (--)1.2 (700)800 MHz pF mV V V V V Unit nA nA Marking : EQ Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2805EA MS IM TB-00001960 No.8709-1/5 CPH6530 Package Dimensions unit : mm 7018-006 0.4 0.15 Electrical Connection 6 5 4 6 5 4 0.6 0.2 0.6 1.6 2.8 0.05 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 Top view 1 2 3 1 0.95 2 2.9 3 0.7 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : CPH6 0.2 0.9 mA mA --30 --900 --1 --7mA Collector Current, IC -- mA 450 400 350 300 250 A1 5m A 10 5m -- mA A --1000 IC -- VCE [PNP] 500 IC -- VCE 7mA 1 0mA [NPN] Collector Current, IC -- mA --5mA --3mA --2mA 20m --800 --700 --600 --500 --400 --300 --200 --100 0 0 --20 8mA 5mA 3mA 30mA 2mA 1mA 200 150 100 50 600µA 200µA --1mA --0.5mA IB=0mA --100 --200 --300 --400 --500 --600 --700 --800 --900 --1000 0 0 IB=0A 100 200 300 400 500 600 700 800 900 1000 Collector-to-Emitter Voltage, VCE -- mV --1200 IT05094 IC -- VBE Collector-to-Emitter Voltage, VCE -- mV 600 IT05106 [PNP] VCE= --2V IC -- VBE [NPN] VCE=2V --1000 500 Collector Current, IC -- mA Collector Current, IC -- mA --800 400 Ta= 75°C 2 5°C --600 300 --200 --25° C --400 200 100 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT05095 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT05107 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V Ta=7 5°C 25°C --25°C No.8709-2/5 CPH6530 1000 hFE -- IC Ta=75°C [PNP] VCE= --2V 1000 7 5 3 2 Ta=75°C 25°C --25°C hFE -- IC [NPN] VCE=2V 7 DC Current Gain, hFE 5 --25°C 3 DC Current Gain, hFE 25°C 100 7 5 3 2 2 100 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA --1000 7 5 3 2 --100 7 5 3 2 --10 7 5 3 2 --1.0 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 IT05096 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05108 VCE(sat) -- IC Collector Current, IC -- mA 3 [PNP] IC / IB=20 VCE(sat) -- IC [NPN] IC / IB=10 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 100 25 °C °C 75 Ta= 5°C --2 5 3 2 10 7 Collector Current, IC -- mA --1000 7 5 7--1000 IT05097 5 1.0 2 3 5 7 10 2 3 --2 5 7 100 5° C 25 °C Ta =7 5° C 2 7 3 5 7 1000 IT05411 VCE(sat) -- IC Collector Current, IC -- mA 3 [PNP] IC / IB=50 VCE(sat) -- IC [NPN] IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 100 Ta = 7 5 --100 7 5 3 2 °C 25 = Ta 5°C --2 °C 75 25 3 2 --10 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 IT05098 10 1.0 2 3 5 7 10 2 3 5 7 100 --2 2 3 °C 5° C 75 °C 5 7 1000 IT05109 Collector Current, IC -- mA --10 7 VBE(sat) -- IC Collector Current, IC -- mA 1000 7 [PNP] IC / IB=20 VCE(sat) -- IC [NPN] IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 3 2 5 3 2 --1.0 7 5 3 2 25°C Ta= --25°C 75°C 100 7 5 3 2 25 °C = Ta °C 75 --2 C 5° --0.1 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA 5 7--1000 IT05099 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05110 Collector Current, IC -- mA No.8709-3/5 CPH6530 3 2 Cob -- VCB [PNP] f=1MHz Base-to-Emitter Saturation Voltage, VBE(sat) -- V 10 7 5 3 2 VBE(sat) -- IC [NPN] IC / IB=20 Output Capacitance, Cob -- pF 10 7 5 1.0 7 5 3 2 25°C Ta= --25°C 75°C 3 2 1.0 --1.0 2 3 5 7 --10 2 3 0.1 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Collector-to-Base Voltage, VCB -- V 1000 7 IT05100 fT -- IC Collector Current, IC -- mA 10 5 7 1000 IT05111 [PNP] VCE= --2V Output Capacitance, Cob -- pF 7 Cob -- VCB [NPN] f=1MHz Gain-Bandwidth Product, fT -- MHz 5 3 2 5 100 7 5 3 2 3 2 10 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA 3 2 --1.0 5 7--1000 IT05101 1.0 1.0 2 3 5 7 10 2 3 5 7 100 ASO ICP= --2A 50 10 0µ Collector-to-Base Voltage, VCB -- V 1000 IT05112 [PNP] Gain-Bandwidth Product, fT -- MHz fT -- IC [NPN] VCE=10V IC= --1A 10 s Collector Current, IC -- A 7 5 3 2 --0.1 7 5 3 2 10 DC op ms 7 0µ s 0m s 5 1m er ati s on 3 2 --0.01 --0.1 Ta=25°C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 1unit 2 3 5 7 --1.0 2 3 5 7 --10 2 3 100 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05113 0.7 Collector-to-Emitter Voltage, VCE -- V IT10001 [PNP/NPN] PC -- Ta Collector Current, IC -- mA 2 1.0 ASO [NPN] ICP=1.0A s 0µ 10 s 0µ 50 0.6 Collector Dissipation, PC -- W M Collector Current, IC -- A ou 0.5 nt 7 5 3 2 0.1 7 5 3 ed IC=0.5A D on 10 C m ac s 0.4 er am 10 op er ic 0m io bo s 1m 0.3 ar s d (6 at 00 n m 0.2 m2 ! 0. 8m m 0.1 0 0 20 40 60 80 100 120 )1 un it 160 2 140 Ambient Temperature, Ta -- °C 0.01 0.1 Ta=25°C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 1unit 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 IT10000 Collector-to-Emitter Voltage, VCE -- V IT10002 No.8709-4/5 CPH6530 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice. PS No.8709-5/5