CPH6904

Ordering number : ENA1966 CPH6904 SANYO Semiconductors DATA SHEET CPH6904 Features • N-Channel Silicon MOSFET High-Frequency Low-Noise Amplifier Applications • Composite type with 2 J-FET contained in a CPH6 package currently in use, improving the mounting efficiency greatly The CPH6904 is formed with two chips, being equivalent to the CPH3910, placed in one package Specifications Absolute Maximum Ratings at Ta=25°C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Gate Current Drain Current Allowable Power Dissipation Total Power Dissipation Channel Temperature Storage Temperature Symbol VDSX VGDS IG ID PD PT Tch Tstg 1unit Conditions Ratings 25 --25 10 50 400 700 150 --55 to +150 Unit V V mA mA mW mW °C °C Package Dimensions unit : mm (typ) 7018A-015 2.9 0.6 6 5 4 0.2 0.15 Product & Package Information • Package : CPH6 • JEITA, JEDEC : SC-74, SOT-26, SOT-457 • Minimum Packing Quantity : 3,000 pcs./reel Packing Type: TL 0.05 Marking LOT No. 2.8 1.6 0.6 1 2 0.95 3 0.4 TL 1 : Drain1 2 : NC 3 : Drain2 4 : Gate2 5 : Source1/Source2 6 : Gate1 SANYO : CPH6 0.2 Electrical Connection 6 5 4 0.9 1 2 3 http://semicon.sanyo.com/en/network 11112AC TKIM TC-00002641 No. A1966-1/4 1P CPH6904 Electrical Characteristics at Ta=25°C Parameter Gate-to-Drain Breakdown Voltage Gate-to-Source Leakage Current Cutoff Voltage Drain Current Forward Transfer Admittance Input Capacitance Reverse Transfer Capacitance Noise Figure Symbol V(BR)GDS IGSS VGS(off) IDSS | yfs | Ciss Crss NF Conditions IG=--10μA, VDS=0V VGS=--10V, VDS=0V VDS=5V, ID=100μA VDS=5V, VGS=0V VDS=5V, VGS=0V, f=1kHz VDS=5V, VGS=0V, f=1MHz VDS=5V, VGS=0V, f=100MHz Ratings min --25 --1.0 --0.6 20.0 30 40 6.0 2.3 2.1 2.8 --1.2 --1.8 40.0 typ max Unit V nA V mA mS pF pF dB The specifications shown above are for each individual J-FET. 30 ID -- VDS V V GS=0 Drain Current, ID -- mA 40 35 30 25 20 15 ID -- VDS VGS=0V 25 Drain Current, ID -- mA 20 --0.2V --0.2V --0.4V 15 --0.4V 10 --0.6V 10 --0.6V 5 --0.8V --0.8V --1.0V 0.5 1.0 1.5 2.0 IT16677 50 45 40 5 0 --1.0V 0 2 4 6 8 10 IT16678 0 0 Drain-to-Source Voltage, VDS -- V 50 45 40 ID -- VGS Drain-to-Source Voltage, VDS -- V ID -- VGS VDS=5V VDS=5V Drain Current, ID -- mA Drain Current, ID -- mA 35 30 35 30 25 20 15 10 5 --25 °C Ta= --1.5 --1.0 --0.5 ID SS = 4 15 10 5 0 --2.0 --1.5 --1.0 --0.5 20 mA 30 20 mA 0 0.5 IT16679 0 --2.0 75 °C 0 25 0m A 25 0.5 IT16680 Gate-to-Source Voltage, VGS -- V 100 | yfs | -- ID Gate-to-Source Voltage, VGS -- V 100 | yfs | -- IDSS Forward Transfer Admittance, | yfs | -- mS 7 5 3 2 Forward Transfer Admittance, | yfs | -- mS VDS=5V f=1kHz IDSS=30mA 7 VDS=5V VGS=0V f=1kHz 5 10 7 5 3 2 1.0 1.0 3 2 2 3 5 7 10 2 3 5 Drain Current, ID -- mA 100 IT16681 7 10 10 2 3 5 7 Drain Current, IDSS -- mA No. A1966-2/4 °C 100 IT16682 CPH6904 10 7 VGS(off) -- IDSS VDS=5V ID=100μA Input Capacitance, Ciss -- pF 10 Ciss -- VDS VGS=0V f=1MHz Cutoff Voltage, VGS(off) -- V 5 3 2 7 5 1.0 7 5 3 2 0.1 10 3 2 2 3 5 7 Drain Current, IDSS -- mA 10 100 IT16683 1.0 1.0 2 3 5 7 10 2 3 5 Crss -- VDS Drain-to-Source Voltage, VDS -- V Allowable Power Dissipation, PD, PT -- mW 800 700 600 500 400 300 200 100 0 0 PD, PT -- Ta 7 100 IT16684 Reverse Transfer Capacitance, Crss -- pF 7 VGS=0V f=1MHz PT 5 1unit 3 2 1.0 1.0 2 3 5 7 10 2 3 5 Drain-to-Source Voltage, VDS -- V 100 IT16685 7 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- °C IT16686 No. A1966-3/4 CPH6904 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of January, 2012. Specifications and information herein are subject to change without notice. PS No. A1966-4/4