FC135

Ordering number:EN3289 FC135 PNP Epitaxial Planar Silicon Composite Transistor Switching Applications (with Bias Resistance) Features · On-chip bias resistance (R1=4.7kΩ)). · Composite type with 2 transistors contained in the CP package currently in use, improving the mounting efficiency greatly. · The FC135 is formed with two chips, being equivalent to the 2SA1510, placed in one package. · Excellent in thermal equilibrium and pair capability. Electrical Connection E1:Emitter 1 B1:Base 1 C2:Collector 2 E2:Emitter 2 B2:Base 2 C1:Collector 1 Package Dimensions unit:mm 2067 [FC135] E1:Emitter 1 B1:Base 1 C2:Collector 2 E2:Emitter 2 B2:Base 2 C1:Collector 1 SANYO:CP6 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Peak Collector Current Collector Dissipation Total Power Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC PT Tj Tstg 1 unit Conditions Ratings –50 –50 –5 –100 –200 200 300 150 –55 to +150 Unit V V V mA mA mW mW ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance C-E Saturation Voltage C-B Breakdown Voltage C-E Breakdown Voltage Input OFF-State Voltage Input ON-State Voltage Input Resistance Symbol ICBO IEBO hFE fT Cob VCB=–40V, IE=0 VEB=–5V, IC=0 VCE=–5V, IC=–10mA VCE=–10V, IC=–5mA VCB=–10V, f=1MHz –50 –50 –0.4 –0.6 3.3 –0.55 –1.0 4.7 –0.8 –2.0 6.1 100 200 5.1 –0.1 –0.3 MHz pF V V V V V kΩ Conditons Ratings min typ max –0.1 –0.1 Unit µA µA VCE(sat) IC=–10mA, IB=–0.5mA V(BR)CBO IC=–10µA, IE=0 V(BR)CEO IC=–100µA, RBE=∞ VI(off) VI(on) R1 VCE=–5V, IC=–100µA VCE=–0.2V, IC=–10mA Note:The specifications shown above are for each individual transistor. Marking:135 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/2190MO, TS No.3289-1/2 FC135 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.3289-2/2