FX207

Ordering number:EN5050 FX207 P-Channel Silicon MOSFET Very High-Speed Switching Applications Features · Low ON-resistance. · Very high-speed switching. · 2.5V drive. Package Dimensions unit:mm 2121 [FX207] Switching Time Test CIrcuit 1:No Contact 2:Gate 3:Source 4:No Contact 5:Drain 6:Drain SANYO:XP5 (Bottom view) Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD PD Tch Tstg PW≤10µs, duty cycle≤1% Tc=25˚C Mounted on ceramic board (750mm2×0.8mm) Conditions Ratings –12 ±10 –4 –16 8 2 150 –55 to +150 Unit V V A A W W ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter D-S Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source ON-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Symbol V(BR)DSS IDSS IGSS VGS(off) | Yfs | RDS(on) RDS(on) Ciss Coss Crss td(on) tr td(off) tf VSD ID=–1mA, VGS=0 VDS=–10V, VGS=0 VGS=±8V, VDS=0 VDS=–6V, I D=–1mA VDS=–6V, I D=–1A ID=–2A, VGS=–4V ID=–1A, VGS=–2.5V VDS=–6V, f=1MHz VDS=–6V, f=1MHz VDS=–6V, f=1MHz See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit IS=–4A, VGS=0 –0.5 2.5 4 135 185 400 370 160 20 120 140 180 –1.0 –1.2 177 300 Conditions Ratings min –12 –100 ±10 –1.5 typ max Unit V µA µA V S mΩ mΩ pF pF pF ns ns ns ns V · Marking:207 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/42895MO (KOTO) TA-0132 No.5050-1/3 FX207 No.5050-2/3 FX207 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.5050-3/3