L78M00T

Ordering number : EN2609C L78M00T Series Monolithic Linear IC L78M00T Series Features • 5 to 24V 0.5A 3-Pin Voltage Regulators • • • • • • • Output voltage L78M05T : 5V L78M06T : 6V L78M07T : 7V L78M08T : 8V L78M09T : 9V L78M10T : 10V L78M12T : 12V L78M15T : 15V L78M18T : 18V L78M20T : 20V L78M24T : 24V 500mA output. On-chip thermal protector. On-chip overcurrent limiter. On-chip ASO protector. Small-sized power package TP-3H permitting the equipment to be made compact. The allowable power dissipation can be increased by being surface-mounted on the board. Capable of being mounted in a variety of methods because of various lead forming versions available. Specifications [Common to L78M00T series] Maximum Ratings at Ta=25°C Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Pin 1 No fin Conditions Ratings 35 1.0 --20 to +80 --40 to +150 Unit V W °C °C Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21006 SY IM / D1599TH (KT) / D0694HK / 9237KI / 9107TA, TS No.2609-1/8 L78M00T Series [L78M05T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 7.5 to 20.0 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=10V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 7V≤VIN≤25V, IOUT=200mA Tj=25°C, 8V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 7V≤VIN≤20V, 5mA≤IOUT≤350mA Tj=25°C 8V≤VIN≤20V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 8V≤VIN≤19V, Tj=25°C, IOUT=100mA f=120Hz, 8V≤VIN≤19V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 62 62 80 2.0 300 0.7 40 4.75 4.5 Conditions Ratings min 4.8 typ 5.0 3.0 1.0 max 5.2 50 25 100 50 5.25 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A [L78M06T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 8.5 to 21 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=11V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 8V≤VIN≤25V, IOUT=200mA Tj=25°C, 9V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 8V≤VIN≤21V, 5mA≤IOUT≤350mA Tj=25°C 9V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 9V≤VIN≤20V, Tj=25°C, IOUT=100mA f=120Hz, 9V≤VIN≤20V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 59 59 80 2.0 300 0.7 45 5.7 4.5 Conditions Ratings min 5.75 typ 6.0 5.0 1.5 max 6.25 60 30 120 60 6.3 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A No.2609-2/8 L78M00T Series [L78M07T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 9.5 to 22 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=12V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 9V≤VIN≤25V, IOUT=200mA Tj=25°C, 10V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 9V≤VIN≤22V, 5mA≤IOUT≤350mA Tj=25°C 10V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 10V≤VIN≤21V, Tj=25°C, IOUT=100mA f=120Hz, 10V≤VIN≤21V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 58 58 80 2.0 300 0.7 48 6.6 4.6 Conditions Ratings min 6.72 typ 7.0 6.0 2.0 max 7.28 60 30 140 70 7.4 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A [L78M08T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 10.5 to 23 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=15V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 10.5V≤VIN≤25V, IOUT=200mA Tj=25°C, 11V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 10.5V≤VIN≤23V, 5mA≤IOUT≤350mA Tj=25°C 11V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 11.5V≤VIN≤22V, Tj=25°C, IOUT=100mA f=120Hz, 11.5V≤VIN≤22V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 56 56 80 2.0 300 0.7 50 7.6 4.6 Conditions Ratings min 7.7 typ 8.0 6.0 2.0 max 8.3 60 30 160 80 8.4 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A No.2609-3/8 L78M00T Series [L78M09T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 12 to 25 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=16V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 11.5V≤VIN≤25V, IOUT=200mA Tj=25°C, 12V≤VIN≤20V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 11.5V≤VIN≤24V, 5mA≤IOUT≤350mA Tj=25°C 12.5V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 12V≤VIN≤23V, Tj=25°C, IOUT=100mA f=120Hz, 12V≤VIN≤23V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 56 56 80 2.0 300 0.7 60 8.5 4.6 Conditions Ratings min 8.6 typ 9.0 6.0 2.0 max 9.4 100 50 180 90 9.5 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A [L78M10T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 13 to 25 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=17V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 12.5V≤VIN≤25V, IOUT=200mA Tj=25°C, 13V≤VIN≤22V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 12.5V≤VIN≤25V, 5mA≤IOUT≤350mA Tj=25°C 13.5V≤VIN≤25V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 13V≤VIN≤25V, Tj=25°C, IOUT=100mA f=120Hz, 13V≤VIN≤25V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 55 55 80 2.0 300 0.7 65 9.5 4.6 Conditions Ratings min 9.6 typ 10.0 7.0 2.0 max 10.4 100 50 200 100 10.5 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A No.2609-4/8 L78M00T Series [L78M12T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 15 to 25 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=19V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 14.5V≤VIN≤30V, IOUT=200mA Tj=25°C, 16V≤VIN≤25V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 14.5V≤VIN≤27V, 5mA≤IOUT≤350mA Tj=25°C 15V≤VIN≤30V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 15V≤VIN≤25V, Tj=25°C, IOUT=100mA f=120Hz, 15V≤VIN≤25V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 55 55 80 2.0 300 0.7 75 11.4 4.8 Conditions Ratings min 11.5 typ 12.0 8.0 2.0 max 12.5 100 50 240 120 12.6 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A [L78M15T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 18 to 30 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=23V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 17.5V≤VIN≤30V, IOUT=200mA Tj=25°C, 19V≤VIN≤30V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 17.5V≤VIN≤30V, 5mA≤IOUT≤350mA Tj=25°C 17.5V≤VIN≤30V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 18.5V≤VIN≤28.5V, Tj=25°C, IOUT=100mA f=120Hz, 18.5V≤VIN≤28.5V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 54 54 70 2.0 300 0.7 90 14.25 4.8 Conditions Ratings min 14.4 typ 15.0 10.0 3.0 max 15.6 100 50 300 150 15.75 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A No.2609-5/8 L78M00T Series [L78M18T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 21 to 33 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=27V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 21V≤VIN≤35V, IOUT=200mA Tj=25°C, 22V≤VIN≤35V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 21V≤VIN≤33V, 5mA≤IOUT≤350mA Tj=25°C 21V≤VIN≤33V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 22V≤VIN≤33V, Tj=25°C, IOUT=100mA f=120Hz, 22V≤VIN≤33V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 53 53 70 2.0 300 0.7 100 17.1 4.9 Conditions Ratings min 17.3 typ 18.0 10.0 5.0 max 18.7 100 50 360 180 18.9 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A [L78M20T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 23 to 35 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=29V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 23V≤VIN≤35V, IOUT=200mA Tj=25°C, 24V≤VIN≤35V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 23V≤VIN≤35V, 5mA≤IOUT≤350mA Tj=25°C 23V≤VIN≤35V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 24V≤VIN≤34V, Tj=25°C, IOUT=100mA f=120Hz, 24V≤VIN≤34V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 53 53 70 2.0 300 0.7 110 19.0 4.9 Conditions Ratings min 19.2 typ 20.0 10.0 5.0 max 20.8 100 50 400 200 21.0 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A No.2609-6/8 L78M00T Series [L78M24T] Recommended Operating Conditions at Ta=25°C Parameter Input voltage Output current Symbol VIN IOUT Conditions Ratings 27 to 35 5 to 500 Unit V mA Operating Characteristics at Ta=25°C, VIN=33V, IOUT=350mA, See specified Test Circuit. Parameter Output voltage Line regulation Load regulation Output voltage Current dissipation Current dissipation variation (Line) Current dissipation variation (Load) Output noise voltage Ripple rejection Minimum input-output voltage dropout Short current Peak output current Symbol VOUT ΔVO Iine ΔVO Ioad VOUT ICC ΔICC Iine ΔICC Ioad VNO Rrej Vdrop IOS IOP Tj=25°C Tj=25°C, 27V≤VIN≤35V, IOUT=200mA Tj=25°C, 28V≤VIN≤35V, IOUT=200mA Tj=25°C, 5mA≤IOUT≤500mA Tj=25°C, 5mA≤IOUT≤200mA 27V≤VIN≤35V, 5mA≤IOUT≤350mA Tj=25°C 27V≤VIN≤35V, IOUT=200mA 5mA≤IOUT≤350mA 10Hz≤f≤100kHz f=120Hz, 28V≤VIN≤35V, Tj=25°C, IOUT=100mA f=120Hz, 28V≤VIN≤35V, Tj=25°C, IOUT=300mA IOUT=350mA Tj=25°C, VIN=35V, to GND Tj=25°C 50 50 70 2.0 300 0.7 170 22.8 5.0 Conditions Ratings min 23.0 typ 24.0 10.0 5.0 max 25.0 100 50 480 240 25.2 6.0 0.8 0.5 Unit V mV mV mV mV V mA mA mA μV dB dB V mA A Package Dimensions unit : mm 3110A 6.5 2.3 Equivalent Circuit 1 INPUT ASO protector Starter Reference voltage 1.5 5.0 0.5 Overcurrent limiter 3 OUTPUT Error amp (5.5) 7.0 0.6 2 GND Thermal protector 7.5 IL00021 1 (0.65) 2 2.6 3 0.5 0.5 1.2 SANYO : TP3H Specified Test Circuit (Common to L78M00T series) INPUT 1 0.33μF L78MOOT Series 2 3 OUTPUT 0.1μF IL00022 No.2609-7/8 L78M00T Series The allowable power dissipation (Pd max) is 1.0W (Ta=25°C) with no fin attached. When the L78M00T series are surface-mounted on a hybrid IC board or printed circuit board, a high allowable power dissipation can be obtained, though they are placed in a small-sized package. Shown below is the relationship between the Cu-foiled area and the allowable power dissipation when the L78M00T series are surface-mounted on a glass epoxy board (50✕50✕0.8mm3). 1.2 Pd max -- Ta Allowable Power Dissipation, Pd max -- W 2 Pd max -- S Surface-mounted on board 50✕50✕0.8tmm3 (glass epoxy) Allowable Power Dissipation, Pd max -- W 1.0 10 7 5 3 2 No 0.8 he at sin k 0.6 0.4 0.2 1.0 7 5 2 3 5 7 100 2 3 5 7 1000 2 3 0 --20 0 20 40 60 80 100 IL00023 Ambient Temperature, Ta -- °C Cu-foiled Area, S -- mm2 IL00024 Lead Formings IL00026 IL00025 FA formings LR formings Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2006. Specifications and information herein are subject to change without notice. PS No.2609-8/8