LA2901

Ordering number : ENN7139 Monolithic Linear IC LA2901V Four-Channel High-Output Line Amplifier for Car Audio Systems Overview The LA2901V is a high output level 4-channel line amplifier designed for car audio systems. This line amplifier provides an output signal with a significantly higher amplitude than the output signal provided by earlier preamplifiers. This higher amplitude significantly improves the signal-to-noise ratio in the connection from the main unit to the external power amplifier, and results in improved power amplifier performance. The LA2901V also significantly reduces the required mounting area by cutting in half the number of external capacitors required for boosting the signal-system supply voltage and is available in SSOP miniature package. Package Dimensions unit: mm 3175B-SSOP24 (275 mil) [LA2901V] 7.8 24 5.6 1 1.5max (0.33) 0.65 0.22 (1.3) 0.15 Functions and Features • • • • • • High output level (5.3 Vrms) Low output noise voltage (12 µV) Low total harmonic distortion (0.004%) High ripple rejection ratio (70 dB) Fewer external parts required Excellent audio fidelity SANYO: SSOP24 (275 mil) Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg With no input signal Ta ≤ 85°C, Mounted on a printed circuit board (114.3 × 76.1 × 1.6 mm3, glass epoxy) Conditions Ratings 13 400 –40 to +85 –40 to +150 Unit V mW °C °C Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O3001TN (OT) No. 7139-1/5 0.1 0.5 7.6 LA2901V Recommended Operating Conditions at Ta = 25°C Parameter Recommended operating voltage Allowable operating supply voltage range Recommended load resistance Symbol VCC VCCOP RLOP Conditions Ratings 9 6 to 12 10 Unit V V kΩ Electrical Characteristics at Ta = 25°C, VCC = 9 V, RL = 10 kΩ, f = 1 kHz, Rg = 600Ω Parameter Quiescent current Voltage gain Output voltage Total harmonic distortion Output noise voltage Ripple rejection ratio Channel separation Input resistance Symbol ICCO VG VO THD VNO SVRR CHsep Ri Rg = 0 VO = 0 dBm THD = 0.1% VO = 3 Vrms, LPF = 80 kHz Rg = 0, BPF = 20 Hz to 20 kHz Rg = 0, fr = 100 Hz, Vr = 100 mVrms, BPF = 20 Hz to 20 kHz Rg = 10 kΩ, VO = 1 Vrms 60 60 21 Conditions Ratings min 10 7.5 5.0 typ 16 8 5.3 0.004 12 70 70 30 39 0.01 17 max 22 8.5 Unit mA dB Vrms % µVrms dB dB kΩ Pin Assignment LIFT R OUT LIFT L OUT LIFT R VD LIFT L VD RR OUT 13 Top view 1 LF IN-2 LF IN+ 3 N.C 4 LR IN-5 LR IN+ 6 DC L 7 DC R 8 RF IN+ 9 RF IN-10 N.C 11 RR IN+ 12 RR IN-RF OUT 14 LR OUT LF OUT 24 23 22 21 20 19 18 17 16 15 LA2901V R GND VCC R L GND VCC L ILA00924 No. 7139-2/5 LA2901V Sample Application Circuit and Block Diagram 36kΩ 24kΩ 24kΩ 36kΩ SIGNAL AMP 22µF + 10kΩ SIGNAL AMP 23 22µF + 10kΩ 1.5NF 100µF VCC 9.0V 100µF + 20 1.5NF 17 X + LIFT AMP 16 VREF RF-IN + 22µF 8 9 + 14 -SIGNAL AMP + -30kΩ VCC + 15 22µF + 10kΩ 13 SIGNAL AMP 22µF + 10kΩ ILA00923 1 LF-IN + 22µF 2 -+ -+ VCC 24 LF-OUT 3 VREF 30kΩ 4 LR-IN + 22µF 5 VREF -+ -+ VCC LR-OUT 22 21 30kΩ X + -- LIFT AMP DC-L Ripple Filter + 6 VREF -+ 12kΩ 36kΩ 19 18 47µF 7 DC-R VREF + -- 12kΩ 36kΩ -- 10 RR-IN + 22µF 11 12 VREF + -- 30kΩ VCC + -- 36kΩ 36kΩ 24kΩ 24kΩ Note: We recommend using resistors with tolerances of 1% or better for the 24 kΩ and 36 kΩ feedback resistors. 10µF + RF-OUT RR-OUT No. 7139-3/5 LA2901V ICCO, VN -- VCC RL=10kΩ Rg=0 25 25 8 VO -- VCC RL=10kΩ f=1kHz THD=0.1% Rg=600Ω L.P.F=80kHz Quiescent current, ICCO — mA Output pin voltage, VN — V I CCO 15 15 Output voltage, VO — Vrms 20 20 7 6 5 10 10 VN 5 5 4 3 0 2 4 6 8 10 12 0 14 ILA00925 2 6 7 8 9 10 11 12 ILA00926 Supply voltage, VCC — V 1.0 7 5 3 2 0.1 7 5 3 2 Supply voltage, VCC — V 2 THD -- VO VCC=9V RL=10kΩ Rg=600Ω L.P.F=80kHz f Response -- f VCC=9V RL=10kΩ VO=0dBm Rg=600Ω Total harmonic distortion, THD — % 1 Response — dB 4 5 6 ILA00927 10kHz 0 0.01 7 5 3 2 0 1 2 3 1kHz --1 100Hz --2 10 23 5 7 100 23 5 7 1k 23 5 7 10k 23 57 100k ILA00928 0.001 Output voltage, VO — Vrms 40 Input frequency, f — Hz 40 VNO -- VCC Output noise voltage, VNO — µVrms Rg=0 RL=10kΩ DIN AUDIO VNO -- Rg VCC=9V RL=10kΩ DIN AUDIO Output noise voltage, VNO — µVrms 30 30 20 20 10 10 0 6 7 8 9 10 11 12 ILA00929 Supply voltage, VCC — V --20 0 10 23 5 7 100 23 Input resistance, Rg — Ω 5 7 1k 23 5 7 10k 23 5 7100k ILA00930 SVRR -- VCCR Ripple rejection ratio, SVRR — dB VCC=9V RL=10kΩ fr=1kHz Rg=0 DIN AUDIO --20 SVRR -- fr VCC=9V RL=10kΩ VCCR=100mVrms Rg=0 DIN AUDIO Ripple rejection ratio, SVRR — dB --40 --40 --60 --60 --80 --80 --100 0 200 400 600 800 1000 ILA00931 Power supply ripple voltage, VCCR — mVrms --100 10 2 3 5 7 100 2 3 5 7 1k 2 3 Ripple frequency, fr — Hz 5 7 10k 2 ILA00932 No. 7139-4/5 LA2901V CH Sep -- f --20 --20 CH Sep -- f Channel separation, CH sep — dB VCC=9V RL=10kΩ LF=1Vrms Rg=10kΩ Channel separation, CH sep — dB --40 VCC=9V RL=10kΩ LR=1Vrms Rg=10kΩ --40 --60 --60 LF LR Rch --80 Rch --80 --100 10 23 5 7 100 23 5 7 1k 23 5 7 10k 23 Input frequency, f — Hz 5 7100k ILA00933 --100 10 23 5 7 100 23 5 7 1k 23 5 7 10k 23 Input frequency, f — Hz 5 7100k ILA00934 CH Sep -- f --20 --20 CH Sep -- f Channel separation, CH sep — dB VCC=9V RL=10kΩ RF=1Vrms Rg=10kΩ Channel separation, CH sep — dB --40 VCC=9V RL=10kΩ RR=1Vrms Rg=10kΩ --40 --60 --60 RF RR Lch --80 Lch --80 --100 10 23 5 7 100 23 5 7 1k 23 5 7 10k 23 Input frequency, f — Hz 5 7100k ILA00935 --100 10 23 5 7 100 23 5 7 1k 23 5 7 10k 23 Input frequency, f — Hz 5 7100k ILA00936 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products (including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2001. Specifications and information herein are subject to change without notice. PS No. 7139-5/5