LA6393M

Ordering number : EN1103F Monolithic Linear IC LA6393M Overview For Parallel Comparator Circuits High-Performance Dual Comparator The LA6393M is a high-performance dual comparator that is capable of operating from a single power supply over a wide range of 2V to 36V. Because of its excellent input characteristics and low power, it can be very conveniently applied to multi-signal parallel comparator circuits that require high-density assembly. Features • Wide operating supply voltage range: 2.0 to 36.0V (single voltage supply), ±1.0 to 18.0V (dual voltage supply) • Wide common-mode input voltage range: 0 to VCC-1.5V • Open collector outputs allow the use of wired OR circuits • Low current drain for low-power operation (0.6mA) • Miniature flat package supports product miniaturization Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Differential input voltage Common-mode input voltage range Allowable power dissipation Operating temperature Storage temperature Symbol VCC max VID VICM Pd max Topr Tstg Independent IC Conditions Ratings 36 36 -0.6 to +36 300 -30 to +85 -55 to +150 Unit V V V mW °C °C Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. O2611 SY/51910 SY/91708 MS/40500TN (KT)/7097KI/4235MW/7282 No.1103-1/6 LA6393M Operating Ranges at Ta = 25°C Parameter Recommended supply voltage range Symbol VCC op Conditions Single voltage supply Dual voltage supply Ratings 2 to 18 ±1 to ±18 Unit V V Electrical Characteristics at Ta = 25°C, VCC = 5V Parameter Input offset voltage Input offset current Input bias current Common-mode input voltage range Current drain Voltage gain Response time Output sink current Output saturation voltage Output leakage current Symbol VIO IIO IB VICM ICC VG SR ISINK VOL ILEAK RL = ∞ RL = 15kΩ VRL = 5 V, RL = 5.1kΩ VIN– = 1V, VIN+ = 0V, VO ≤ 1.5V VIN– = 1V, VIN+ = 0V, ISINK ≤ 3mA VIN– = 0V, VIN+ = 1V, VO = 5V 4 5 6 7 8 9 6 Conditions Test circuit 1 2 3 0 0.6 200 1.3 16 0.2 0.1 0.4 min Ratings Unit typ ±1 ±5 25 max ±5 ±50 250 VCC-1.8 1 mV nA nA V mA V/mV μs mA V nA Package Dimensions unit : mm (typ) 3032D 350 Pd max -- Ta Independent IC 5.0 8 5 Allowable power dissipation, Pd max -- mW 300 250 4.4 6.4 200 0.63 150 1 (0.65) 1.27 4 0.35 0.15 100 1.7max (1.5) 50 0 -30 -20 0 20 40 60 80 85 100 Ambient temperature, Ta -- °C 0.1 SANYO : MFP8(225mil) Pin Assignment VOUT1 1 VIN−1 2 VIN+1 3 GND 4 Top view − + + − 8 VCC 7 VOUT2 6 VIN−2 5 VIN+2 No.1103-2/6 LA6393M Equivalent Circuit VCC (8) VIN+ (3 or 5) Tr1 Tr2 Tr3 Tr4 Tr8 VOUT (1 or 7) Tr7 Tr5 Tr6 GND (4) Test Circuit 1. Input offset voltage VCC R2 VCC 2. Input offset current VCC R2 VCC R1 RL R1 R RL NULL 1.4V VEE C R2 R2 VIO = VF1 1+R2/R1 IIO = VF2−VF1 R(1+R2/R1) 3. Input bias current VCC R2 VCC VCC R2 VCC R1 R1 R RL R1 NULL 1.4V VEE C R2 R2 |VF3−VF4| . IB = 2R(1+R2/R1) + + VF3 R1 R + 1.4V RL 1.4V + + R1 + VF1 R1 R + NULL VEE VF2 C + NULL VEE VF4 C No.1103-3/6 LA6393M 4. Current drain VCC 5. Voltage gain VCC R2 VCC A R1 RL R2 VG = (EK1−EK2) (1+R2/R1) (VF6−VF5) 4. response time VCC 100mV VOUT 0 RL tr VIN 0 ΔV (over drive) 7. Output sink current VCC 8. Output saturation voltage VCC VIN 9. Output leakage current VCC A VO VIN + A VO VIN + R1 + NULL EK1, EK2 VEE VF5,6 C 90% + + + Δ: Over drive ISINK V VOL No.1103-4/6 LA6393M 2.4 ICC -- VCC RL = ∞ Input bias current, ICC -- nA 100 90 IB -- Ta 2.0 80 70 60 50 40 30 20 10 Current drain, ICC -- mA 1.6 1.2 0.8 Ta = − 20°C 0.4 25°C 85°C 0 0 4 8 12 16 20 24 28 32 36 0 -30 -20 -10 Supply voltage, VCC -- V 0.28 Ambient temperature, Ta -- °C 0 10 20 30 40 50 60 70 80 90 VOL -- Ta Output saturation voltage, VOL -- V 0.24 Output saturation voltage, VOL -- V VCC = +5V ISINK = 3mA 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 0.01 2 3 5 7 0.1 VOL -- ISINK 0.20 0.16 +2 =+ Ta 85 °C 5°C °C 0.12 0 −2 0.08 0.04 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 2 3 Ambient temperature, Ta -- °C Input voltage, VIN -- mV Output voltage, VO -- V 6 5 Output sink current, ISINK -- mA 5 7 1.0 2 3 5 7 10 2 Overdrive 5mV 4 3 VIN +5V 5.1kΩ -+ VO Input voltage, VIN -- mV Output voltage, VO -- V VO,VIN -- t 6 5 4 VO,VIN -- t Overdri 80mV 50mV 20mV 2 1 0 0 2 1 0 80mV 50mV 20mV 3 ve 5mV VIN +5V 5.1kΩ -+ VO 100 50 0 -0.5 0 0.5 1.0 1.5 2.0 2.5 -50 -100 -150 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 -50 -1.0 3.0 3.5 4.0 Time, t -- μS Time, t -- μS No.1103-5/6 LA6393M Application Circuit Example VCC VCC 51kΩ 3kΩ 1MΩ Vref 1000pF 15kΩ VIN 51kΩ 10kΩ Voltage comparator (with hysteresis) Square wave generator SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of October, 2011. Specifications and information herein are subject to change without notice. PS No.1103-6/6 + 51kΩ + 10kΩ VOUT VOUT