LA6500_08

Ordering number : EN2623F Monolithic Linear IC LA6500 Overview Power Operational Amplifier The LA6500 is a power operational amplifier. Features • High output current (IO max = 1.0A) • High gain • With current limiter • Capable of being operated from single supply Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Differential input voltage Common-mode input voltage Output current Allowable power dissipation Symbol VCC/VEE VID VIN IO max Pd max1 Pd max2 Operating temperature Storage temperature Topr Tstg With infinity large heat sink Independent IC Conditions Ratings ±18 30 ±15 1.0 20 1.75 -20 to +75 -55 to +150 Unit V V V A W W °C °C Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 82708 MS/32896HA(II)/7297TA,TS No.2623-1/4 LA6500 Electrical Characteristics at Ta = 25°C, VCC /VEE = ±15V Parameter Quiescent current dissipation Input offset voltage Input offset current Input bias current Common-mode input voltage range Common-mode rejection Maximum output voltage Voltage gain Slew rate Equivalent input noise voltage Supply voltage rejection Limiting current CMR VO VGO SR VNI SVR ISC GV = 0, RL = 33Ω, R = 2.2Ω, L = 0.1µF Rg = 1kΩ, DIN AUDIO RL = 33Ω 70 ±12 80 ±13 100 0.15 2 30 1.0 150 dB V dB V/µs µV µV/V A Symbol ICCO VIO IIO IB VICM -15 Conditions min Ratings typ 6.0 2 10 100 max 12.0 6 200 700 +13 mA mV nA nA V Unit Package Dimensions unit : mm (typ) 3079C 25 Pd max -- Ta Infinite heat sink 3.6 2.7 10.4max 10.0 4.5 1.3 Allowable power dissipation, Pd max -- W 20 15 15.0 (8.8) 17.8 21.3 23.0 5°C/W heat sink 10 0.9 2.7 10°C/W heat sink 5 20°C/W heat sink No heat sink 1 5 0.8 0.45 4.5 8.4 (1.6) 1.7 0 -20 0 20 40 60 75 80 Ambient temperature, Ta -- °C SANYO : 220-5H Pin Assignment + − Top view 1 2 3 4 5 +VIN −VIN VEE OUTPUT VCC No.2623-2/4 LA6500 Equivalent Circuit 5 VCC −VIN 2 +VIN 1 Current limiter 4 OUTPUT 3 VEE Test Circuit (1) VIO, SVRR 9.9kΩ 100Ω 100Ω 100Ω (2) VO (3) CMMR, VICM 9.9kΩ 100Ω 9.9kΩ ±1V 100Ω 2kΩ V1 100Ω 9.9kΩ VIO is VCC / VEE = ± 15V VCC = 15, 5V SVRR is VEE = -5, -15V VIO = VO1 / 100 ∆VO1 SVR(+) = SVR(−) 100×10V CMRR V1 = ± 7.5V 15×100 CMR = 20log ∆VO (3) IB(+) 9.9kΩ 100Ω 50kΩ (4) IB(−) 9.9kΩ 100Ω (5) IIO 9.9kΩ 100Ω 50kΩ 100Ω 9.9kΩ 100Ω 9.9kΩ 100Ω 9.9kΩ IB(+) = VO2 − VO1 50kΩ×100 IB(−) = VO3 − VO1 50kΩ×100 IIO = VO4 − VO1 50kΩ×100 (7) ICC +15V (8) SR ICC Oscilloscope Pulse Generator −15V 1kHz 2kΩ 10Vp-p Square wave + + + VO2 50kΩ VO3 50kΩ + + VO1 VO VO + + VO4 + No.2623-3/4 LA6500 (9) VGO 5pF (10) VNI 100kΩ 100Ω 100kΩ NULL VO 100Ω 100kΩ 1kΩ VGO = 20log 1000×20 ∆VO Application Circuit Example + VCC 5 2.2Ω OUT 0.1µF 4 LA6500 3 2 1 + VEE −VIN +VIN SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2008. Specifications and information herein are subject to change without notice. PS No.2623-4/4 + 1kΩ DIN AUDIO Filter + +