LA6516

Ordering number : EN5674 Monolithic Linear IC LA6516 Two-Output Power Amplifier Overview The LA6516 is a two-output power amplifier developed for use in both consumer and industrial equipment. Package Dimensions unit: mm 3046B-SIP10F [LA6516] Functions • • • • • • • High slew rate (1.0 V/µs) High output current (IO max = 1.0 A) Current limiter function Wide operating voltage range (±2 to 18 V) Supports single-voltage power supply operation (4 to 36 V) Thermal shutdown function Muting circuit (Functions for both channels; when the mute input is high the output will be on.) SANYO: SIP10F Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Input voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC/VEE VIN Pd max Topr Tstg Conditions Ratings ±18 ±17 2.5 –20 to +75 –40 to +150 Unit V V W °C °C Allowable power dissipation, Pd max — W With an arbitrarily large heat sink With no heat sink θ j-c = 10°C/W Tightening torque: 39 N·cm Ambient temperature, Ta — °C SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 93097HA(OT) No. 5674-1/4 LA6516 Electrical Characteristics at Ta = 25°C, VCC = 10 V, VEE = –10 V Parameter Quiescent current Input offset voltage Input offset current Input bias current Common-mode input voltage range Common-mode rejection ratio Supply voltage rejection ratio Voltage gain Maximum output voltage Slew rate Limit current Muting on voltage Muting off voltage Offset voltage temperature coefficient Symbol ICC VIO IIO IB VICM CMRR SVRR VGO VO1 VO2 SR ILIMIT VMUTE ON VMREF = 0.0 V VMUTE OFF VMREF = 0.0 V ∆ VIO/∆T Ta = –20 to +75°C 0.5 RL = 33 Ω RL = 8 Ω RL = 2 kΩ ±5.6 VIN = 15 Vp-p VCC/VEE = ±5 V, 15 V –9 75 30 80 ±8 ±6 1 1 1.0 1.0 25 2.0 Mute off VCC/VEE = ±15 V Conditions Ratings min typ 10 2 10 50 max 30 7 100 300 +8 Unit mA mV nA nA V dB µV/V dB V V V/µS A V V µV/°C Pin Assignment VIN1+ Pin Functions Pin No. 1 2 3 4 5 6 7 8 9 10 Pin VMREF MUTE MUTE VIN1 + Item Muting on/off reference voltage input VIN1– Function Muting on/off signal input. Muting is activated when the MUTE pin voltage is less than the VMREF pin voltage plus 1.2 V (typ). Amplifier 1 noninverting input VIN1 VEE – AMP1 Amplifier 1 inverting input Amplifier 1 output VO 1 Negative power supply – Negative power supply (–2.0 to –18.0 V) Amplifier 2 output VO2 VIN2 VIN2 AMP2 + Amplifier 2 inverting input Amplifier 2 noninverting input VCC Positive power supply Positive power supply (+2.0 to +18.0 V) No. 5674-2/4 LA6516 Test Circuits • For VIO • For SVRR • VICM V1 = –9 to +8 V 3 kΩ Continued on next page. No. 5674-3/4 LA6516 Continued from preceding page. VO 1 VO 2 200-mV p-p 10-kHz square wave • For VO1: RL = 33 Ω • For VO2: RL = 8 Ω s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. s Anyone purchasing any products described or contained herein for an above-mentioned use shall: Œ Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use:  Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 1997. Specifications and information herein are subject to change without notice. No. 5674-4/4