LA6520

Ordering number: EN2621A Monolithic Linear IC LA6520 3-Output Power Operational Amplifier Overview The LA6520 is a 3-output power OP amp designed for use in consumer, industrial applications. Package Dimensions unit : mm 3022A-DIP12F [LA6520] Features . High output current (Io = 0.5 A) . High gain . With current limiter . Wide operating voltage range (±2 to ±18 V) . Capable of being operated from single supply (4 to 36V) . On-chip thermal shutdown SANYO : DIP12F Specification Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Differential input voltage Common-mode input voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC/VEE VIDIf VICOM Pd max Topr Tstg Conditions Ratings ±18 30 ±15 1.9 –20 to +75 –55 to +150 Unit V V V W °C °C Operating Characteristics at Ta = 25°C, VCC/VEE = ± 15 V Parameter Quiescent current dissipation Input offset voltage Input offset current Input bias current Common-mode input voltage range Common-mode rejection Maximum output voltage Voltage gain Slew rate Supply voltage rejection Limiting current (On-chip limiter) Symbol ICCO VIO IIO IB VICM CMR Vo VGO SR SVR ISC RL = 33 Ω GV = 0, RL = 33 Ω, R = 10 Ω, L = 0.1 µF Conditions Rs % 10 kΩ min typ 20 2 10 50 max Unit mA mV nA nA V dB V dB V/µs µV/V A –15 80 ±12 85 0.15 30 0.5 +13 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 32896HA(II)/7297TA,TS No.2621-1/2 LA6520 Pin Assignment Allowable power dissipation, Pd max – W Fe plate (Fin 1) Fe plate (Fin 1) Fe plate (Fin 2) PCB only IC only Ambient temperature, Ta – °C No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: 1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: 2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 1996. Specifications and information herein are subject to change without notice. No.2621-2/2