LA73065VA

Ordering number : ENA0887 Monolithic Linear IC LA73065VA Overview For wideband 75Ω Video Driver This LA73065VA is HD video driver. This IC output Component and RGB. It built in the 12MHz/30MHz-LPF. It is the best for the filter to remove the digital clock noise of the Component or RGB Analog video signal. Functions • Three channel output • 12MHz or 30MHz low pass filter • 6dB amplifier • Output mute • D_DC_Output • Standby mode Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta ≤ 75°C * Conditions Ratings 6.0 500 -20 to +75 -40 to +150 Unit V mW °C °C * : Mounted on a board : 114.3mm×76.1mm×1.6mm, glass epoxy board. Recommended Operating Conditions at Ta = 25°C Parameter Recommended supply voltage Operating supply voltage range Input pin voltage application range Symbol VCC VCC opg VIN Conditions Ratings 5.0 4.75 to 5.25 -0.3 to VCC opg+0.3 Unit V V Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 80807 MS PC 20070703-S00004 No.A0887-1/9 LA73065VA Electrical Characteristics at Ta = 25°C, VCC = 5.0V Input signal Parameter Current consumption 1 Current consumption 2 Internal reference regulator REG3V Video Driver part Voltage gain 1 Py, R, G, B T9A T7A T9A T11A Voltage gain 2 Pr, Pb Frequency response 1 Py, R, G, B T7A T11A T9A T7A T9A T11A Frequency response 2 Pr, Pb Frequency response 3 Py, R, G, B T7A T11A T9A T7A T9A T11A Frequency response 4 Pr, Pb Frequency response 5 Py, R, G, B T7A T11A T9A T7A T9A T11A Frequency response 6 Pr, Pb Frequency response 7 Py, R, G, B T7A T11A T9A T7A T9A T11A Frequency response 8 Pr, Pb Frequency response 9 Py, R, G, B T7A T11A T9A T7A T9A T11A Frequency response 10 Pr, Pb 2nd order distortion 1 Py, R, G, B T7A T11A T9A T7A T9A T11A 2nd order distortion 2 (HD) Pr, Pb Amount of mute attenuation 1 Py, R, G, B T7A T11A T9A T7A T9A T11A Amount of mute attenuation 2 Pr, Pb Crosstalk between channels 1 Py, R, G, B T7A T11A T9A T7A T9A T11A Continued on next page. SIG1 0.7 4M SIG3 0.7 4M SIG1 0.7 4M SIG3 0.7 10M SIG1 0.7 10M SIG3 0.3 75M T18 T14 T16 T18 T16 T14 T18 T14 T16 T18 T16 T14 T18 T14 -60 -50 dB -60 -50 dB -60 -50 dB 30MHz LPF is selected. -40 -30 dB 30MHz LPF is selected. f = 75MHz/100kHz 30MHz LPF is selected. -40 -30 dB -40 -30 dB SIG1 0.3 75M SIG3 0.3 30M T18 T14 T16 T16 T14 30MHz LPF is selected. f = 30MHz/100kHz 30MHz LPF is selected. f = 75MHz/100kHz -40 -30 dB -3.5 -1.0 1.5 dB SIG1 0.3 30M SIG3 0.3 20M T18 T14 T16 T16 T14 30MHz LPF is selected. f = 20MHz/100kHz 30MHz LPF is selected. f = 30MHz/100kHz -3.5 -1.0 1.5 dB -1 0.0 1 dB SIG1 0.3 20M SIG3 0.3 75M SIG1 0.3 75M SIG3 0.3 12M SIG1 0.3 12M SIG3 0.3 100k SIG1 0.3 100k T16 T18 T16 T14 T18 T14 T16 T18 T16 T14 T18 T14 T16 T18 T16 T14 T18 T14 T16 T16 T14 12MHz LPF is selected. f = 75MHz/100kHz 30MHz LPF is selected. f = 20MHz/100kHz -1 0.0 1 dB -40 -30 dB 12MHz LPF is selected. f = 12MHz/100kHz 12MHz LPF is selected. f = 75MHz/100kHz -40 -30 dB -3 0.0 3 dB 12MHz LPF is selected. f = 12MHz/100kHz -3 0.0 3 dB Output gain 5.5 6.0 6.5 dB Output gain 5.5 6.0 6.5 dB T24 2.8 3.0 3.2 V Point Signal Level [Vp-p] Freq [Hz] Out Point Conditions At no signal. At no signal. Standby mode. min 36 0.0 typ 45 0.5 max 54 1.0 unit mA mA No.A0887-2/9 LA73065VA Continued from preceding page. Input signal Parameter Crosstalk between channels 2 Pr, Pb Video S/N Py, R, G, B Point T7A T11A T9A T7A T9A T11A G.D.1 Py, R, G, B T9A T7A T9A T11A G.D.2 Pr, Pb G.D.3 Py, R, G, B T7A T11A T9A T7A T9A T11A G.D.4 Pr, Pb T7A T11A SIG3 0.3 30M SIG1 0.3 30M SIG3 0.3 12M SIG1 0.3 12M SIG2 0.65 T16 T18 T16 T14 T16 T18 T16 T14 T18 T14 T16 T18 T16 T14 T18 T14 30MHz LPF is selected. f = 30MHz/100kHz 10 20 ns 12MHz LPF is selected. f = 12MHz/100kHz 30MHz LPF is selected. f = 30MHz/100kHz 10 20 ns 10 20 ns VIN = Video (50% White) 30MHz LPF is selected. The band is between 100kHz and 30MHz. 12MHz LPF is selected. f = 12MHz/100kHz 10 20 ns -60 -50 dB Signal SIG3 Level [Vp-p] 0.7 Freq [Hz] 4M Out Point Conditions min typ -60 max -50 unit dB Package Dimensions unit : mm (typ) 3287 6.5 24 13 4.4 6.4 1 0.5 (0.5) 0.22 12 0.15 SANYO : SSOP24(225mil) 0.1 (1.3) 1.5max 0.5 No.A0887-3/9 LA73065VA Block Diagram SW1:Power Save CTL D_LINE1_IN (High/Open/Low) 1 REG3V 2 VREG_3V VREG_3V 47μF + 24 5V/2.2V/0V 23 10kΩ D_LINE1_OUT D_LINE2_IN (High/Low) 3 D_LINE3_IN (High/Open/Low) 4 REG3V 5V/2.2V/0V 21 5V/0V 22 10kΩ D_LINE2_OUT 10kΩ D_LINE3_OUT SW2:Input CTL (CLAMP or BIAS) 5 20 N.C. VCC_HD 6 CLAMP SW2 7 BIAS 100kΩ 12MHz SW3 LPF 30MHz LPF 6dB SW4 19 VCC_DR_HD 75Ω Pr/R_OUT 75Ω Pr/R_IN 1 μF + MUTE Driver 330μF 18 + SW3:Firter CTL (12MHz or 30MHz) Py/G_IN 1μF + 8 12MHz LPF 30MHz LPF 17 N.C. 75Ω Py/G_OUT 75Ω SW3 6dB MUTE Driver SW4 9 CLAMP 1000μF 16 + SW4:HD Mute CTL 10 CLAMP SW2 11 BIAS 100kΩ 12MHz SW3 LPF 30MHz LPF 6dB SW4 15 GND_DR_HD 75Ω Pb/B_OUT 75Ω Pb/B_IN 1μF + MUTE Driver 330μF 14 + GND_HD 12 13 N.C. Please shorten the distance of the bold line to prevent oscillation. Pin control table SW No. SW1 SW2 SW3 SW4 D_L1 D_L2 D_L3 IN_Pin No. Pin1 Pin5 Pin8 Pin10 Pin2 Pin3 Pin4 Pin23 Pin22 Pin21 OUT_Pin No. SW function name Power_Save_CTL Input_CTL Filter_CTL HD_MUTE_CTL D_LINE1 D_LINE2 D_LINE3 Control voltage High (2.3V to VCC) Power_Save_OFF CLAMP_ON (RGB_Mode) 12MHz_LPF_ON HD_MUTE_OFF High (4.0V to VCC) High (4.0V to VCC) High (4.0V to VCC) Midd (1.8 to 2.4V) Midd (1.8 to 2.4V) Open Low (0 to 0.7V) Power_Save_ON BIAS_ON (Component_Mode) 30MHz_LPF_ON HD_MUTE_ON Low (0 to 0.5V) Low (0 to 0.5V) Low (0 to 0.5V) No.A0887-4/9 LA73065VA Pin Functions Pin No. 1 Pin name Power_Save_CTL 5V : Power_Save_OFF 0V : Power_Save_ON DC voltage Signal wave form Input/Output form 10kΩ 1 100kΩ 2 D_LINE1_IN 5V : 1125 (1080) OPEN : 750 (720) 3V_REG 200kΩ 0V : 525 (480) 2 10kΩ 200kΩ 3 D_LINE2_IN 5V : 59.94p/60p 0V : 59.94i/60i 10kΩ 3 100kΩ 4 D_LINE3_IN 5V : 16 : 9 OPEN : 4 : 3 Letter Box 200kΩ 4 10kΩ 0V : 4 : 3 200kΩ 5 INPUT_CTL 5V : Clamp 0V : Bias 10kΩ 5 100kΩ Continued on next page. No.A0887-5/9 LA73065VA Continued from preceding page. Pin No. 6 7 Pin name VCC_HD Pr/R_IN Component : 2.3V (Bias) RGB : 1.8V (Clamp) DC voltage Signal wave form Input/Output form 500Ω 700mVp-p 2.3V Clamp:OFF 7 1kΩ 1kΩ 100kΩ 700mVp-p 1.8V Bias:OFF 50μA 110μA 8 FIL_CTL 5V : 12MHz_LPF 0V : 30MHz_LPF 10kΩ 8 100kΩ 9 Py/G_IN 1.8V 500Ω 1.0Vp-p 1.8V 1kΩ 9 1kΩ 700mVp-p 1.8V 110μA 10 HD_MUTE_CTL 5V : HD_MUTE_OFF 0V : HD_MUTE_ON 10kΩ 10 100kΩ Continued on next page. No.A0887-6/9 LA73065VA Continued from preceding page. Pin No. 11 Pin name Pb/B_IN DC voltage Component : 2.3V (Bias) RGB : 1.8V (Clamp) Signal wave form Input/Output form 500Ω 700mVp-p 2.3V Clamp:OFF 11 1kΩ 1kΩ 100kΩ 700mVp-p 1.8V Bias:OFF 50μA 110μA 12 13 14 GND_HD N.C. Pb/B_OUT Component : 2.4V (Bias) RGB : 1.3V (Clamp) 30Ω 2.4V 1.4Vp-p 1.3kΩ 1.5kΩ 1.4Vp-p 1.3V 14 30Ω 15 16 GND_DR_HD Py/G_OUT 1.3V 30Ω 2.0Vp-p 1.3V 1.3kΩ 1.5kΩ 1.4Vp-p 16 30Ω 1.3V 17 N.C. Continued on next page. No.A0887-7/9 LA73065VA Continued from preceding page. Pin No. 18 Pin name Pr/R_OUT DC voltage Component : 2.4V (Bias) RGB : 1.3V (Clamp) Signal wave form Input/Output form 30Ω 2.4V 1.4Vp-p 1.3kΩ 1.5kΩ 1.4Vp-p 1.3V 18 30Ω 19 20 21 VCC_DR_HD N.C. D_LINE3_OUT 5V : 16 : 9 2.2V : 4 : 3Letter Box 0V : 4 : 3 High:OFF OPEN:OFF 300Ω 21 500μA Low:OFF 22 D_LINE2_OUT 5V : 59.94p/60p 0V : 59.94i/60i 300Ω 22 23 D_LINE1_OUT 5V : 1125 (1080) 2.2V : 750 (720) 0V : 525 (480) High:OFF OPEN:OFF 300Ω 23 500μA Low:OFF 24 REG3V 3.0V 50Ω 100Ω 26kΩ 30kΩ 32kΩ 24kΩ 24 No.A0887-8/9 LA73065VA Test Input Signal SIN WAVE Vp-p SIG.1 1H 0.3Vp-p 0.35Vp-p SIG.2 1H 0.3Vp-p Vp-p SIG.3 SIN WAVE SANYO SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of January, 2007. Specifications and information herein are subject information as of August, 2007. Specifications and information to change without notice. PS No.A0887-9/9