LA7976

LA7976

  • 厂商:

    SANYO(三洋)

  • 封装:

  • 描述:

    LA7976 - PAL SIF Converter Circuit for TV and VCR Multi-system - Sanyo Semicon Device

  • 详情介绍
  • 数据手册
  • 价格&库存
LA7976 数据手册
Ordering number: EN 5559 Monolithic Linear IC LA7976 PAL SIF Converter Circuit for TV and VCR Multi-system Overview The LA7976 is an IC that converts PAL SIF signals (5.5 MHz, 6 MHz, and 6.5 MHz) to 6 MHz. Package Dimensions unit : mm 3042C-SIP5 [LA7976] Functions . Mixer, amplifier, oscillator, oscillator mute Features . Small SIP-5 package . Wide range of usage voltage (5 V to 12 V) SANYO : SIP5 Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Maximum feed current Allowable power dissipation Operating temperature Storage temperature Symbol VCC max I5 max I4 max Pd max Topr Tstg Ta % 85°C Conditions Ratings 13.2 3 1 200 –20 to +85 –40 to +150 Unit V mA mA mW °C °C Operating Conditions at Ta = 25°C Parameter Recommended supply voltage Operating voltage range Symbol VCC VCC op Conditions Ratings 9 4.5 to 12 Unit V V SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 83096HA(II) No.5559-1/5 LA7976 Operating Characteristics at Ta = 25°C, VCC = 9 V Parameter Current drain Conversion gain 5.5 MHz 6.5 MHz 6.0 MHz Oscillation level Maximum output level Input impedance Pin voltages 500 kHz level difference relative to 6 MHz Maximum input level Symbol ICC G5.5 G6.5 G6.0 VOSC VO max Ri V1 V4 V5 OSC leak VIN max Conditions 80 dB/µV input 80 dB/µV input 80 dB/µV input, Pin 4 grounded with 10 kΩ 5.5 MHz 100 dB/µV input 5.5 MHz input Test point Pin 2 Pin 5 Pin 5 Pin 5 Pin 4 Pin 5 Pin 1 Pin 4 Pin 5 Pin 5 min 5 10 10 10 15 104 2.6 7.3 7.2 30 85 typ 6.5 13.5 13.5 13.5 48 108 4.8 3 7.7 7.6 40 max 9 17 17 17 80 112 3.4 8.1 8 Unit mA dB dB dB mVp-p dB/µV kΩ V V V dB dB/µV Sample Application Circuit Oscillator 500 kHz CSB503E5 Murata Industries, Ltd. 500 kHz EFOA512K04A Matsushita Electric, Ltd. Unit (resistance: Ω, capacitance: F) No.5559-2/5 LA7976 Reference Example 1 Reference Example 2 Unit (resistance: Ω, capacitance: F) No.5559-3/5 LA7976 . Pin 1 is the SIF input pin. The filter in Figure 2 can be connected to the input section to improve the buzz characteristic. If C1 is too small, the buzz characteristic improves for normal input, but the filter cuts into the sound carrier and the buzz characteristic deteriorates for the P/S (picture/sound carrier) ratio. Figure 1 Unit (resistance: Ω, capacitance: F) From video output section Use C1 6 20 pF to 47 pF. Figure 2 . Pin 4 is the ceramic oscillator pin. To make the oscillation waveform approach a sine wave,the oscillation level is controlled internally. Oscillation levels of 15 to 80 mVp-p at Pin 4 give the waveform shown in Figure 4. Figure 4 (Pin 4 oscillation waveform) Figure 3 Unit (resistance: Ω) . Pin 5 is the output pin. The output from Pin 5 is input to the SIF via a 6 MHz bandpass filter (BPF). When 5.5 MHz is input to Pin 1, the spectrum shown in Figure 6 is obtained at Pin 5. Output level Ceramic BPF chracteristic D/U ratio Figure 5 Unit (resistance: Ω) Figure 6 (5.5 MHz input) No.5559-4/5 LA7976 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: 1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: 2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 1996. Specifications and information herein are subject to change without notice. No.5559-5/5
LA7976
1. 物料型号: - 型号:LA7976 - 制造商:SANYO

2. 器件简介: - LA7976是一款集成电路,主要用于将PAL制式的SIF信号(5.5 MHz、6 MHz和6.5 MHz)转换为6 MHz的信号。

3. 引脚分配: - Pin 1:SIF输入引脚。 - Pin 4:陶瓷振荡器引脚,用于控制振荡波形接近正弦波。 - Pin 5:输出引脚,输出信号通过6 MHz带通滤波器(BPF)输入到SIF。

4. 参数特性: - 最大供电电压:13.2V - 最大供电电流:3mA - 允许的最大功率耗散:200mW(在85°C环境温度下) - 工作温度范围:-20°C至+85°C - 存储温度范围:-40°C至+150°C

5. 功能详解: - 包括混频器、放大器、振荡器和振荡器静音功能。 - 封装类型为小SIP-5。 - 工作电压范围宽(5V至12V)。

6. 应用信息: - 该器件适用于电视和VCR多制式转换电路。

7. 封装信息: - 封装尺寸以毫米为单位,具体尺寸未在文档中详细说明,但提到了3042C-SIP5封装类型。
LA7976 价格&库存

很抱歉,暂时无法提供与“LA7976”相匹配的价格&库存,您可以联系我们找货

免费人工找货