LB11683V

Ordering number : ENA0674 LB11683V Overview Monolithic Digital IC Three-Phase Sensorless Motor Driver The LB11683V is a three-phase full-wave current-linear-drive motor driver IC. It adopts a sensorless control system without the use of a Hall effect device. For quieter operation, the LB11683V features a current soft switching circuit and is optimal for driving the cooling fan motors used in refrigerators, etc. Functions • Current linear drive • Built-in current limiter circuit • Output stage oversaturation prevention circuit • Coil counter-electromotive FG output • Built-in thermal shutdown circuit • Beat lock prevention circuit • Lock protection circuit • Lock detection output Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Supply voltage Output applied voltage Input applied voltage Output current Allowable power dissipation Operating temperature Storage temperature Symbol VCC max VO max VI max IO max Pd max Topr Tstg Independent IC Conditions Ratings 14.5 14.5 -0.3 to VCC+0.3 1.5 0.5 -30 to +85 -55 to +150 Unit V V V A W °C °C Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 62707 SY IM B8-8707 No. A0674-1/7 LB11683V Allowable Operating Conditions at Ta = 25°C Parameter Supply voltage 1 Supply voltage 2 Symbol VCC VCC Conditions All operating circuits other than internal 5V Reg. All operating circuits. Ratings 5.5 to 7.0 7.0 to 13.8 Unit V V Electrical Characteristics at Ta = 25°C, VCC = 12V Parameter Supply current Output saturation voltage 1 Output saturation voltage 2 MCOM pin common-phase input voltage range PCOUT output current 1 PCOUT output current 2 VCOIN input current VCO minimum frequency VCO maximum frequency C1, C2 source current ratio C1, C2 sink current ratio C1 source, sink current ratio C2 source, sink current ratio Counter-electromotive FG output ON voltage CT pin charge current CT pin discharge current Lock protection detection voltage Lock protection reset voltage RD pin leak current RD pin output LO voltage Current limiter setting voltage Thermal shutdown operating temperature Thermal shutdown hysteresis ∆TTSD Design target * TTSD Design target * ICT1 ICT2 VRD1 VRD2 IRDLEAK VRDL IO=1mA 0.45 150 100 0.5 180 15 Source current Sink current 1.2 50 2.3 1.13 1.6 77 2.45 1.26 2.6 1.39 10 400 0.55 210 IPCOU IPCOD IVCOIN fVCOMIN fVCOMAX RSOURCE RSINK RC1 RC2 VOL Source side Sink side VCOIN=5V VCOIN=open CX=0.022µF VCOIN=5V CX=0.022µF 1-(IC1SOURCE/IC2SOURCE) 1-(IC1SINK/IC2SINK) IC1SOURCE/IC1SINK IC2SOURCE/IC2SINK IFGO=1mA 330 14.8 -12 -12 50 50 0.4 Symbol ICC VOSAT1 VOSAT2 VIC Conditions min VC=VCC VFC=0V IO=0.4A, Source+Sink IO=0.8A, Source+Sink, RF=0Ω 0 -90 90 0.1 400 18.5 0.2 500 22.3 +12 +12 Ratings typ 10 1.4 1.8 max 15 2.0 2.6 VCC-2 mA V V V µA µA µA Hz kHz % % % % V µA nA V V µA mV V °C °C Unit *: Design target value and no measurement is made. No. A0674-2/7 LB11683V Package Dimensions unit : mm (typ) 3315 0.6 Pd max - Ta Independent IC Allowable power dissipation, Pd max - W 9.75 24 13 0.5 0.4 5.6 7.6 0.3 0.26 0.2 1 0.8 (0.48) 0.3 12 0.15 0.5 (1.3) 1.5MAX 0.1 0 -30 -10 10 30 50 70 90 110 SANYO : SSOP24J(275mil) Pin Assignment 0.1 Ambient temperature, Ta - °C ILB01809 1 2 3 4 5 6 7 UOUT WOUT NC MCOM VCC UIN VIN VOUT RF NC NC NC 24 23 22 21 20 19 18 LB11683V FC BFGO 8 9 10 11 12 WIN C1 C2 CX VCOIN CT RD GND GND PCOUT 17 16 15 14 13 Top view No. A0674-3/7 VCC 0.1µF MCOM Block Diagram 50kΩ BFGC Thermal shutdown circuit Rotor detection circuit Mask circuit Timing control circuit Soft switching driver circuit Startup control circuit 0.022µF C1 C2 Output drive circuit 0.022µF UOUT VOUT WOUT 0.01µF LB11683V 560kΩ Beat lock prevention circuit PLL VCO 8 divider PCOUT VCOIN 0.47µF 200Ω CX RF Upper side saturation prevention control GND 0.5V Lock protection circuit 50kΩ RD 0.5Ω 0.022µF 0.1µF FC CT ILB01810 No. A0674-4/7 LB11683V Pin Functions Pin No. 24 1 2 23 Symbol UOUT VOUT WOUT RF Pin Voltage Equivalent Circuit Diagram Description VCC 3.9Ω 10kΩ 30kΩ 24 3.9Ω 30kΩ 23 1 2 6 7 8 20 µ F 3-phase motor driver output Minimum potential of 3-phase motor driver output transistor. Constant current control is made through detection of this voltage. The current limiter also functions by detecting this potential. 5 4 VCC MCOM 8 to 13.8V Power supply VCC 24 1 2 6 7 8 10kΩ 200Ω 2kΩ 200Ω 200Ω 4 Motor coil neutral point input pin. The coil voltage waveform is detected with reference to this voltage. Coil waveform detection comparator input pin. This pin is connected to each phase output through the internal 10kΩ resistor. 6 7 8 9 UIN VIN WIN C1 VCC 15µF 15µF 9 10 1kΩ 5µA VREG Triangular wave generating capacitor connection pin. This triangular wave performs soft-switching of the coil output waveforms. 10 C2 2S 1/2VREG-VF 11 CX In the VCO circuit, the operation frequency VCC VREG 100µA range and minimum operation frequency are determined by means of the capacitor value connected this pin and ground. 300Ω 11 12 VCOIN VREG VCC 10kΩ 1.75V 12 50kΩ VCO circuit voltage input pin. The PCOUT pin voltage is input via CR filter. 50µA 50µA Continued on next page. No. A0674-5/7 LB11683V Continued from preceding page. Pin No. 13 Symbol PCOUT Pin Voltage Equivalent Circuit Diagram Description VCO circuit PLL output VREG VCC 13 14 15 18 GND BFGO Ground for all other than the output transistor Motor counter-electromotive voltage detection FG output (single-phase only). Open collector output VREG 100µA 18 19 FC VREG VCC Frequency characteristics compensation pin. Insertion of a capacitor between this pin and ground stops oscillation of the closed loop of current control system. 1kΩ 19 10kΩ 5kΩ 16 RD VREG 15kΩ 16 Lock detection output. When motor is running: low-level When motor is locked: high-level Open collector output 17 CT VCC 0.1µA 1µA 17 25kΩ Lock protection ON/OFF time setting capacitor VREG connection pin. The capacitor connected between this pin and ground determines the driver ON/OFF time when the motor is locked. 15µA 2S No. A0674-6/7 LB11683V SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2007. Specifications and information herein are subject to change without notice. PS No. A0674-7/7