LB1935T_07

Ordering number : EN7932D LB1935T LB1935CL Overview Monolithic Digital IC Stepping Motor Driver IC LB1935T/LB1935CL is IC with forward/reverse motor drive 2-channel in which low saturation voltage and low voltage operation possible. Its small sized package is optimal for 2 phase excitation drive of 2 phase bipolar stepping motors for various portable devices such as digital still cameras. Features • Low saturation voltage, VO(sat) = 0.3V typ at IO = 150mA • Built-in shoot-through current protection circuit • No standby current consumption (or zero) • Built-in thermal shutdown circuit • MSOP10 small-sized package (3.0mm×4.9mm×1.1mm typ) [LB1935T] • ECSP2828-10 ultraminiature leadless package (2.8mm×2.8mm×0.8mm typ) [LB1935CL] Absolute Maximum Ratings at Ta = 25°C Parameter Maximum power source voltage Applied output voltage Applied input voltage GND Pin outflow current Allowable power dissipation Symbol VCC max VOUT max VIN max I GND Pd max Pd max Operating temperature Storage temperature Topr Tstg OUT1, OUT2, OUT3, OUT4 pin ENA, IN1, IN2 pin Per channel With substrate* With substrate* [LB1935T] [LB1935CL] Conditions Ratings -0.3 to +8.0 VCC+VSF -0.3 to +8.0 400 400 450 -20 to +75 -40 to +150 Unit V V V mA mW mW °C °C * Specified substrate : 20.0mm×10.0mm×0.8mm, paper phenol Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 60607 MS IM B8-7254,B8-7758 / 92706 /N3004 TN IM / 91004 JO IM No.7932-1/6 LB1935T, LB1935CL Allowable Operating Range at Ta = 25°C Parameter Source voltage Input high level voltage Input low level voltage Symbol VCC VIH VIL ENA, IN1, IN2 pin ENA, IN1, IN2 pin Conditions Ratings 2.2 to 7.5 1.8 to 7.5 -0.3 to +0.7 Unit V V V Electric Characteristics at Ta = 25°C, VCC = 3.3V Parameter Power source current Symbol ICC0 ICC1 Output saturation voltage VOUT1 VOUT2 Input current IIN IENA Spark killer diode Reverse current Forward voltage IS(leak) VSF IOUT = 200mA * [LB1935T only] 1 1.7 µA V Conditions min ENA = 0V, VIN = 3V or 0V ENA = 3V, VIN = 3V or 0V ENA = 3V, VIN = 3V or 0V, IOUT = 100mA ENA = 3V, VIN = 3V or 0V, IOUT = 200mA * [LB1935T only] VIN = 3V VENA = 3V Ratings typ 0.1 13 0.2 0.4 40 40 max 1 19 0.3 0.6 60 60 µA mA V V µA µA Unit Note : *For LB1935CL, it is a design assured value. Package Dimensions unit : mm (typ) 3297 [LB1935T] 3.0 10 6 Package Dimensions unit : mm (typ) 3301A [LB1935CL] TOP VIEW 2.8 1 10 SIDE VIEW BOTTOM VIEW 1 3.0 4.9 2 0.3 0.5 (0.5) 0.5 0.2 0.125 6 0.075 5 (0.85) 1.1 max SIDE VIEW (0.8) 0.08 SANYO : MSOP10(150mil) (0.015) 0.8 SANYO : ECSP2828-10 No.7932-2/6 0.05 1 5 2.8 0.6 (0.2) 0.325 LB1935T, LB1935CL Pin Assignments VCC 1 10 OUT4 VCC 1 10 OUT4 IN2 2 9 OUT3 IN2 2 9 OUT3 ENA 3 LB1935T 8 OUT1 ENA 3 LB1935CL 8 OUT1 IN1 4 7 OUT2 IN1 4 7 OUT2 (NC) 5 6 GND Top view (NC) 5 6 GND Top view ILB01601 500 Pd max -- Ta Specified Substrate : [LB1935T] Allowable power dissipation, Pd max -- mW Allowable power dissipation, Pd max -- mW 20.0×10.0×0.8mm3 Peper phenol 500 450 400 Pd max -- Ta [LB1935CL] Specified Substrate : 20.0×10.0×0.8mm3 Peper phenol 400 300 240 200 300 270 200 100 100 0 -20 0 20 40 60 80 100 ILB01610 0 -20 0 20 40 60 80 100 ILB01691 Ambient temperature, Ta -- °C Ambient temperature, Ta -- °C No.7932-3/6 LB1935T, LB1935CL Block Diagram Truth Table Input ENA L H IN1 L L H H IN2 L H H L OUT1 OFF H H L L OUT2 OFF L L H H Output OUT3 OFF H L L H OUT4 OFF L H H L Remarks Stdby 2-phase excitation No.7932-4/6 LB1935T, LB1935CL Timing Chart Timing chart below shows the 2 phase excitation stepping motor. No.7932-5/6 LB1935T, LB1935CL SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2007. Specifications and information herein are subject to change without notice. PS No.7932-6/6