LV0101CF

Ordering number : ENA1855A Monolithic Linear IC LV0101CF Overview For Ultra-small illumination Sensor Photo IC The LV0101CF is a photo IC for ultra-small illumination sensor. It enables to be mounted on a very small limited space such as on the mobile phones which is becoming small and thinner and on other mobile applications. Functions • Logarithm current output • Excellent luminous efficiency function • Built-in sleep function • Low current consumption Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Operating temperature Storage temperature Symbol VCC max Topr Tstg Conditions Ratings 6 -30 to +85 -40 to +100 Unit V °C °C Recommended Operating Conditions and Operating Voltage Range at Ta = 25°C Ratings Parameter Recommended supply voltage SW pin low voltage SW pin high voltage Symbol VCC Vl Vh Sleep mode Normal mode Conditions min 2.3 0 1.5 typ 2.5 max 5.5 0.4 VCC Unit V V V Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 60811 SY 20110601-S00011/O2010 SY 20101006-S00003 No.A1855-1/6 LV0101CF Electrical and optical characteristics at Ta = 25°C, VCC = 2.5V Ratings Parameter Current dissipation *1, *3 Sleep current Output current (1) *1, *3 Output current (2) *1, *3 Dark current Temperature coefficient *2 Rise time *4 Fall time *4 Peak sensitivity wave length *2 Symbol ICC Isl IO1 IO2 Ileak Itc Tr1 Tf1 λp Conditions min Ev = 1000 lx, RL = 27kΩ Ev = 0 lx Ev = 100 lx Ev = 1000 lx Ev = 0 lx Ev = 100 lx Ev = 1000 lx Ev = 1000 lx 18 27 50 typ 75 0.01 21 31 0.35 0.1 40 2 550 100 5 max 100 0.1 24 35 0.5 μA μA μA μA μA %/°C μs ms nm Unit *1. Measured with the standard light source A. White LED is used instead in the mass production line. *2. Design guaranteed item *3. Test circuit for measuring current dissipation and output current Light source A VCC LV0101CF Ipd A OUT *4. Measuring method of rise time (Tr) and fall time (Tf) Pulse drive White LED LV0101CF Ipd VCC Ipd 0A 0.8V 90% OUT VOUT 10% Tr Tf GND No.A1855-2/6 LV0101CF Package Dimensions unit : mm (typ) 3410 TOP VIEW SIDE VIEW BOTTOM VIEW 1.08 4 3 3 4 1.08 2 1 1 2 0.25 0.5 SIDE VIEW 0.1 0.68 MAX (0.42) (0.52) SANYO : ODCSP4J(1.08X1.08) Pad Layout Pin No. Pin Name VCC EN GND OUT Function Power supply Enable Ground Output 0.5 4 3 3 4 1 2 3 1 2 2 1 4 Ball pitch : 0.5mm, Ball size : 0.25mmφ Pad Layout (Photos) 4 3 3 4 1 PAD 2 2 1 * The position with PAD becomes pin 1. No.A1855-3/6 LV0101CF Internal Block Diagram VCC 1 Current amplifier PD OUT 4 2 EN 3 GND Chip Pattern Diagram (Top View) 1080 195 195 83.5 PD PD 167 1080 83.5 PD 167 85 85 PD 540 PAD center (−386.9,−377.9) 540 unit: μm * The PAD becomes pin 1. No.A1855-4/6 LV0101CF 50 IO -- lux 100 7 5 IO -- lux 40 Output current, IO -- μA Output current, IO -- μA 23 5 7 10 23 5 7100 23 5 7 1k 23 5 7 10k 3 2 30 10 7 5 3 2 20 10 0 1 1 1 23 5 7 10 23 5 7 100 23 5 7 1k 23 5 7 10k Illuminance, lux -- lx 120 Illuminance, lux -- lx 10 ICC -- lux ISl -- lux 7 5 3 2 7 5 3 2 100 1 Sleep current, ISl -- μA Current drain, ICC -- A 80 0.1 7 5 3 2 S p lee cur ren t 60 0.01 7 5 3 2 7 5 3 2 7 5 3 2 40 0.001 Wh en sl c eep urr ent 20 0.0001 0 1 23 5 7 10 23 5 7 100 23 5 7 1k 23 5 710k 0.00001 1 23 5 7 10 23 5 7100 23 5 7 1k 23 5 710k Illuminance, lux -- lx 1.4 Illuminance, lux -- lx 1.4 RIO -- VCC @1000lx Relative current drain ratio, RICC -- ratio RICC -- VCC @1000lx Relative output current ratio, RIO -- ratio 1.2 1.2 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0 2 3 4 5 6 0.2 0 2 3 4 5 6 Supply voltage, VCC -- V 1.4 RI -- Ta Supply voltage, VCC -- V 10 7 5 3 2 ID -- Ta @100lx Relative current ratio, RI -- ratio 1.2 1 0.8 Dark current, ID -- μA -40 -20 0 20 40 60 80 100 120 1 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 -40 -20 0 20 40 60 80 100 120 0.6 0.4 0.2 0 -60 0.001 -60 Ambient temperature, Ta -- °C Ambient temperature, Ta -- °C No.A1855-5/6 LV0101CF 1 0.9 Spectral Response LV0101CF Directivity 1.2 @1000lx Relative output current ratio, RIO -- ratio 800 1000 1200 Human eye Relative sensitivity, RS -- ratio 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 200 400 1 0.8 0.6 0.4 0.2 600 0 -90 -60 -30 0 30 60 90 Wavelength, λ -- nm 1.2 Angle, deg -- ° Directivity @1000lx Relative PD current ratio, RIPD -- ratio 1 0.8 0.6 0.4 0.2 0 -90 -60 -30 0 30 60 90 Angle, deg -- ° SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2011. Specifications and information herein are subject to change without notice. PS No.A1855-6/6