LV8413GP

Ordering number : ENA1341 Bi-CMOS LSI LV8413GP Overview For DSC, and Cell Phone Camera Modules H-Bridge × 2-channel Motor Driver The LV8413GP is an H-bridge × 2-channel motor driver IC and is able to control 4 modes of forward, reverse, brake, and standby. This IC housed in a miniature package is optimum for use in a stepping motor driving system for DSC or a camera module of cell phones. Features • Saturation drive H-bridge : 2-channels • Built-in thermal protection circuit • Built-in low voltage malfunction prevention circuit • Incorporates a transistor for driving photosensors Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Power supply voltage 1 Power supply voltage 2 Output peak current Output continuous current 1 Output continuous current 2 Allowable power dissipation Operating temperature Storage temperature Symbol VM max VCC max IO peak IO max1 IO max2 Pd max Topr Tstg Outs 1 to 4, t ≤ 10msec, ON-duty ≤ 20% Outs 1 to 4 PI Mounted on a circuit board* Conditions Ratings 6 6 600 400 15 0.7 -20 to +85 -55 to +150 Unit V V mA mA mA W °C °C * Specified circuit board : 50.0mm × 40.0mm × 0.8mm : glass epoxy four-layer board (2S2P) Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. N1908 MS PC 20081016-S00007 No.A1341-1/7 LV8413GP Recommended Operating Conditions at Ta = 25°C Parameter Power supply voltage range 1 Power supply voltage range 2 Logic input voltage range Input frequency Symbol VM VCC VIN fIN IN1 to 4, INA Conditions Ratings 2.5 to 5.5 2.5 to 5.5 0 to VCC+0.3 to 100 Unit V V V kHz Electrical Characteristics at Ta = 25°C, VM = 5V, VCC = 3.3V, unless otherwise specified. Parameter Standby mode current drain VM current drain VCC current drain VCC low-voltage cutoff voltage Low-voltage hysteresis voltage Thermal shutdown temperature Thermal hysteresis width OUT1 to 4 Logic pin internal pull-down resistance Logic pin input current IinL IinH Logic input high-level voltage Logic input low-level voltage Output on-resistance VinH VinL Ronu Rond Output leakage current Diode forward voltage PI Logic pin internal pull-down resistance Logic pin input current IinL IinH Logic input high-level voltage Logic input low-level voltage Output on-resistance Output leakage current VinH VinL Ron IOleak VIN = 0, INA VIN = 3.3V, INA INA INA IO = 10mA 4 20 2.5 1.0 6 1 33 1.0 50 µA µA V V Ω µA Rin INA 50 100 200 kΩ IOleak VD ID = -400mA 1.0 VIN = 0, IN1 to 4 VIN = 3.3V, IN1 to 4 IN1 to 4 IN1 to 4 IO = 400mA, upper ON resistance IO = 400mA, lower ON resistance 0.5 0.3 20 2.5 1.0 0.8 0.5 1 33 1.0 60 µA µA V V Ω Ω µA V Rin IN1 to 4 50 100 200 kΩ Symbol Istn IM ICC VthVCC VthHYS TSD ∆TSD Design guarantee value * Design guarantee value * IN1 to 4 = “L” Any one of IN1 to 4 = “H”, with no load Any one of IN1 to 4 = “H” 1.85 100 160 10 70 0.6 2.10 150 180 30 Conditions min Ratings typ max 1.0 150 1.2 2.35 200 200 50 µA µA mA V mV °C °C Unit No.A1341-2/7 LV8413GP Package Dimensions unit : mm (typ) 3318 0.8 Pd max – Ta Specified board : 50.0×40.0×0.8mm3 4-layer glass epoxy (2S2P) TOP VIEW 2.6 SIDE VIEW BOTTOM VIEW (0.125) Allowable power dissipation, Pd max – W 0.7 0.6 (C0.116) (0.13) 2.6 0.4 0.4 2 LASER MARKED INDEX 0.5 (0.55) 1 16 0.2 SIDE VIEW 0 – 20 0 20 40 60 80 85 100 Ambient temperature, Ta – °C 0.8 (0.035) 0.25 SANYO : VCT16(2.6X2.6) Pin Assignment 12 SGND 11 VCC 10 VM 9 PGND OUT1 13 PI 8 14 INA OUT2 7 LV8413GP 15 IN4 Top View 16 IN3 PGND IN2 IN1 VM OUT4 5 OUT3 6 1 2 3 4 No.A1341-3/7 LV8413GP Block Diagram + VM VM OUT1 OUT2 OUT3 OUT4 PGND PGND Logic circuit Thermal shutdown circuit VCC + - LVS circuit 15mA max SGND IN1 IN2 IN3 IN4 INA PI VCC CPU No.A1341-4/7 LV8413GP Pin Functions Pin No. 2 1 16 15 14 Pin name IN1 IN2 IN3 IN4 INA Pin Function Control signal input pin Control signal input pin Control signal input pin Control signal input pin Control signal input pin Equivalent Circuit VCC 10kΩ 100kΩ GND 8 7 6 5 OUT1 OUT2 OUT3 OUT4 Outpin Outpin Outpin Outpin VM PGND 13 PI Outpin GND 11 3 10 12 4 9 VCC VM VM SGND PGND PGND Logic system power supply connection pin Motor power supply connection pin Motor power supply connection pin Signal ground Power ground Power ground No.A1341-5/7 LV8413GP Logic input specifications • Common channels 1 to 2 ch1 : IN1 to IN2, OUT1 to OUT2 ch2 : IN3 to IN4, OUT3 to OUT4 Input IN1 L H L H IN2 L L H H OUT1 OFF H L L Output OUT2 OFF L H L Operation mode Standby CW (forward) CCW (reverse) Brake • Current limit control timing chart VM VM VM ON OFF OFF ON OFF OFF OFF ON ON OFF ON ON (Forward) (Reverse) (Brake) • Photo sensor driving transistor When thermal shutdown and VCC low-voltage cut circuits are activated, OUT1 through OUT4 are turned OFF under control of the internal circuit. But the output (PI) of photo sensor driving transistor continues operation. Input INA L H Photo sensor driving PI OFF ON No.A1341-6/7 LV8413GP SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of November, 2008. Specifications and information herein are subject to change without notice. PS No.A1341-7/7