Ordering number : ENA1819
Bi-CMOS LSI
LV8416CB
Overview
For DSC, and Cell Phone Camera Modules
H-Bridge × 4-channel Motor Driver
The LV8416CB is an H-bridge×4-channel motor driver IC and is able to control 4 modes of forward, reverse, brake and standby. This IC housed in a wafer level package (WLP) is optimum for use in a stepping motor driving system for DSC or a camera module of cell phones.
Functions
• Saturation drive H-bridge: 4-channels • Various protection circuits (thermal protection, low voltage malfunction protection)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Power supply voltage Output peak current Output continuous current Allowable power dissipation Operating temperature Storage temperature Symbol VCC max IO peak IO max Pd max Topr Tstg Channels 1 to 4, t ≤ 10msec, ON-duty ≤ 20% Channels 1 to 4 Mounted on a circuit board* Conditions Ratings 6.0 600 400 1000 -30 to +85 -55 to +150 Unit V mA mA mW °C °C
Specified circuit board : 60mm × 60mm × 1.7mm, glass epoxy two-layer board.
Recommended Operating Conditions at Ta = 25°C
Parameter Power supply voltage range Logic input voltage range Input frequency Symbol VCC op VIN fIN IN1 to 8 Conditions Ratings 2.5 to 5.5 0 to VCC+0.3 to 100 Unit V V kHz
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment.
81110 SY 20100728-S00004 No.A1819-1/5
LV8416CB
Electrical Characteristics at Ta = 25°C, VCC = 5V
Parameter Standby mode current drain VCC current drain Symbol Ist ICC1 ICC2 VCC low-voltage cutoff voltage Low-voltage hysteresis voltage Thermal shutdown temperature Thermal hysteresis width Input pin Logic pin input current IinL IinH Logic input high-level voltage Logic input low-level voltage Input circuit current consumption Motor driver Output on-resistance Ronu Rond Output leakage current Diode forward voltage Turn-on time Turn-off time At the rise time Standing fall time IOleak VD Ton Toff Tr Tf ID = -100mA Time of Input 50% → Output 50% *2 Time of Input 50% → Output 50% Time of Output 10% → 90% Time of Output 90% → 10% 0.4 0.75 0.10 0.15 0.05 0.05 IO = 100mA, upper ON resistance IO = 100mA, lower ON resistance 0.5 0.3 0.75 0.55 1.0 1.2 0.50 0.55 0.20 0.20 Ω Ω μA V μsec μsec μsec μsec Vinh Vinl ICCin VIN = 0V, IN1 to IN8 VIN = 3.3V, IN1 to IN8 IN1 to IN8 IN1 to IN8 VIN = 3.3V, power hit of IN1 to IN8 *1 30 80 8.3 0.5×VCC 0.2×VCC 250 16.5 1.0 33 μA μA V V μA VthVCC VthHIS TSD ΔTSD Design guarantee value * Design guarantee value * IN1 to IN8 = “L” VCC=VIN1 = 3.3V VCC=VIN1 = 5.0V 40 50 2.0 100 160 10 80 100 2.25 150 180 30 Conditions min Ratings typ max 1.0 160 200 2.5 200 200 50 μA μA μA V mV °C °C Unit
*1: The input circuit current consumption in CMOS circuit composition of the input steps is generated though it is unquestionable for IC operation when impressing it to VIN voltage that is lower than the VCC voltage. *2: Time from change edge to change edge (0.5×VCC) of control input at output level. It doesn't have an enable pin, and as for this IC, either in the input pin begins and the internal logic begins operation of "High". Therefore, the turn-on time becomes about three microseconds only at the initial motion work of the input terminal "High".
Package Dimensions
unit : mm (typ) 3401
TOP VIEW 2.47 SIDE VIEW BOTTOM VIEW
1.5
Pd max - Ta
Specified circuit board : 60.0 × 60.0 × 1.7mm3 glass epoxy board
0.235
0.4
0.235
Allowable power dissipation, Pd max -- W
0.4
1.27
A
1.0
1.00
6 SIDE VIEW
5
4
3
2
1
0.69 MAX
0.245
C
B
0.52 0.5
0.175
SANYO : WLP18(2.47X1.27)
0 —0 3
0
30
60
90
120
Ambient temperature, Ta -- C
No.A1819-2/5
LV8416CB
Pin Assignment
Bottom view
Top view
1
OUT2
OUT1
VCC
VCC
OUT1
OUT2
1
2
OUT3
IN1
IN2
IN2
IN1
OUT3
2
3
OUT4
IN3
IN4
IN4
IN3
OUT4
3
4
OUT5
IN5
IN6
IN6
IN5
OUT5
4
5
OUT6
IN7
IN8
IN8
IN7
OUT6
5
6
GND
OUT7
OUT8
OUT8
OUT7
GND
6
A
B
C
C
B
A
Block Diagram
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
Logic Circuit
VCC Low voltage protection circuit Standard voltage Overheating protection circuit GND
IN1
IN2
IN3
IN4
IN5
IN6
IN7
IN8
CPU
No.A1819-3/5
LV8416CB
Pin Functions
Pin No. B2 C2 B3 C3 B4 C4 B5 C5 Pin name IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 Pin Function Control signal input pin Control signal input pin Control signal input pin Control signal input pin Control signal input pin Control signal input pin Control signal input pin Control signal input pin Equivalent Circuit
VCC
GND
B1 A1 A2 A3 A4 A5 B6 C6
OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8
Motor driver output pin Motor driver output pin Motor driver output pin Motor driver output pin Motor driver output pin Motor driver output pin Motor driver output pin Motor driver output pin
VCC
GND
C1 A6 VCC GND Logic system power supply connection pin Signal ground
Logic input specifications • Common channels 1 to 4 ch1 : IN1 to IN2, OUT1 to OUT2 ch2 : IN3 to IN4, OUT3 to OUT4 ch3 : IN5 to IN6, OUT5 to OUT6 ch4 : IN7 to IN8, OUT7 to OUT8
Input IN1 L H L H IN2 L L H H OUT1 OFF H L L Output OUT2 OFF L H L Operation mode Standby CW (forward) CCW (reverse) Brake
No.A1819-4/5
LV8416CB
• Output stage transistor function
VCC VCC VCC
ON
OFF
OFF
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
(Forward)
(Reverse)
(Brake)
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above.
This catalog provides information as of August, 2010. Specifications and information herein are subject to change without notice. PS No.A1819-5/5
