MCH3144_11

Ordering number : ENN8210 MCH3144 / MCH3244 MCH3144 / MCH3244 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package permitting applied sets to be small and slim (mounting height : 0.85mm). High allowable power dissipation. Specifications ( ) : MCH3144 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2✕0.8mm) Conditions Ratings (--30)40 (--)30 (--)5 (--)2 (--)5 (--)400 0.8 150 --55 to +150 Unit V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)30V, IE=0 VEB=(-)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(-)300mA VCB=(--)10V, f=1MHz 200 (440)400 (17)12 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit μA μA Marking : MCH3144 : AH, MCH3244 : CR Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 12805EA TS IM TB-00001029 No.8210-1/4 MCH3144 / MCH3244 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1.5A, IB=(--)75mA IC=(--)1.5A, IB=(--)75mA IC=(--)10μA, IE=0 IC=(--)1mA, RBE=∞ IE=(-)10μA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (--30)40 (--)30 (--)5 (45)40 (200)350 (23)30 Ratings min typ (--170)160 (--)0.94 max (--260)240 (-)1.2 Unit mV V V V V ns ns ns Package Dimensions unit : mm 2194A 0.25 Switching Time Test Circuit 0.3 3 0.15 PW=20μs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω RB 2.1 1.6 RL=24Ω 0.25 2 0.65 2.0 1 + 100μF VBE= --5V + 470μF VCC=12V 0.07 (Bottom view) 3 1 : Base 2 : Emitter 3 : Collector 1 2 (Top view) 0.85 IC=20IB1= --20IB2=500mA For PNP, the polarity is reversed. SANYO : MCPH3 --2.0 --1.8 IC -- VCE --5 0 A A 0m -30m --4 2.0 IC -- VCE 40mA mA --2 0mA --15mA --10mA Collector Current, IC -- A 1.8 1.6 1.4 1.2 1.0 0.8 15 mA A Collector Current, IC -- A --1.4 --8mA --1.2 50mA 30m --1.6 2 A 0m 10m A 8mA 6mA 4mA --6mA --1.0 --0.8 --0.6 --4mA --2mA 2mA 0.6 0.4 0.2 --0.4 --0.2 0 0 MCH3144 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 IB=0 --1.8 --2.0 IT09080 0 0 MCH3244 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IB=0 1.8 2.0 IT09081 Collector-to-Emitter Voltage, VCE -- V --2.00 --1.75 Collector-to-Emitter Voltage, VCE -- V 2.00 1.75 IC -- VBE MCH3144 VCE= --2V Collector Current, IC -- A IC -- VBE MCH3244 VCE=2V Collector Current, IC -- A --1.50 --1.25 --1.00 1.50 1.25 1.00 Ta=75 °C Ta=75 °C 25°C --25°C --0.75 --0.50 --0.25 0 0 --0.2 --0.4 0.75 0.50 0.25 0 --0.6 --0.8 --1.0 IT09082 0 0.2 0.4 0.6 0.8 --25°C 25°C 1.0 IT09083 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V No.8210-2/4 MCH3144 / MCH3244 1000 7 hFE -- IC MCH3144 VCE= --2V 1000 7 hFE -- IC MCH3244 VCE=2V DC Current Gain, hFE DC Current Gain, hFE 5 5 Ta=75°C 3 Ta=75°C 25°C --25°C 25°C 3 --25°C 2 2 100 7 --0.01 100 7 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 1000 IT09084 1000 Collector Current, IC -- A IT09085 f T -- IC Gain-Bandwidth Product, f T -- MHz MCH3144 VCE= --10V f T -- IC Gain-Bandwidth Product, f T -- MHz 7 5 7 5 MCH3244 VCE=10V 3 3 2 2 100 7 5 --0.01 100 7 5 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 7 IT09086 7 5 Cob -- VCB Collector Current, IC -- A IT09087 Cob -- VCB MCH3144 f=1MHz MCH3244 f=1MHz Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 5 3 3 2 2 10 7 10 --0.1 5 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 5 3 2 IT09088 5 VCE(sat) -- IC Collector-to-Base Voltage, VCB -- V IT09089 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V MCH3144 IC / IB=20 3 2 MCH3244 IC / IB=20 0.1 7 5 3 2 --0.1 7 5 Ta 3 2 =7 C 5° °C 25 °C = Ta 75 °C 5 --2 --2 5°C °C 25 0.01 7 --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A IT09090 Collector Current, IC -- A IT09091 No.8210-3/4 MCH3144 / MCH3244 3 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V MCH3144 IC / IB=20 3 VBE(sat) -- IC MCH3244 IC / IB=20 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 2 --1.0 7 Ta= --25°C 1.0 7 Ta= --25°C 75°C 5 25°C 75°C 5 25°C 3 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 IT09092 0.9 ASO Collector Current, IC -- A IT09093 PC -- Ta ICP=5A 100