MCH3145

Ordering number : ENN8211 MCH3145 / MCH3245 MCH3145 / MCH3245 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package permitting applied sets to be small and slim (mounting height : 0.85mm). High allowable power dissipation. Specifications ( ) : MCH3145 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--50)80 (--50)80 (--)50 (--)6 (--)2 (--)4 (--)400 0.8 150 --55 to +150 Unit V V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(--)300mA VCB=(--)10V, f=1MHz 200 420 (16)8 Ratings min typ max (--)1 (--)1 560 MHz pF Unit µA µA Marking : MCH3145 : AN, MCH3245 : CS Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 12805EA TS IM TB-00001031 No.8211-1/5 MCH3145 / MCH3245 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1A, IB=(--)50mA IC=(--)1A, IB=(--)50mA IC=(--)10µA, IE=0 IC=(--)100µA, RBE=0 IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (-50)80 (-50)80 (-)50 (--)6 (35)35 (200)330 (24)40 Ratings min typ (--)0.9 max (--)1.2 (-165)130 (--330)260 Unit mV V V V V V ns ns ns Package Dimensions unit : mm 2194A 0.25 Switching Time Test Circuit 0.3 3 0.15 PW=20µs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω + 100µF + 470µF VCC=25V RB 2.1 1.6 RL 0.25 0.65 2.0 (Bottom view) 0.07 2 1 3 VBE= --5V 1 : Base 2 : Emitter 3 : Collector 1 2 (Top view) 0.85 IC=10IB1= --10IB2=0.7A For PNP, the polarity is reversed. SANYO : MCPH3 --2.0 --1.8 --1.6 --1.4 --1.2 --1.0 --0.8 --0.6 IC -- VCE MCH3145 -0 10 mA --80 2.0 IC -- VCE 50m A mA --60 mA --40 mA --20m A Collector Current, IC -- A 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 40 m A 30mA MCH3245 20mA 15mA Collector Current, IC -- A --10mA --8mA --6mA 10mA 8mA 6mA 4mA --4mA --2mA 2mA --0.4 --0.2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 IB=0 --1.8 --2.0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IB=0 1.8 2.0 Collector-to-Emitter Voltage, VCE -- V IT09096 Collector-to-Emitter Voltage, VCE -- V IT09097 No.8211-2/5 MCH3145 / MCH3245 --2.00 --1.75 IC -- VBE MCH3145 VCE= --2V 2.00 1.75 IC -- VBE MCH3245 VCE=2V Collector Current, IC -- A Collector Current, IC -- A --1.50 --1.25 1.50 1.25 1.00 0.75 0.50 0.25 0 Ta=7 5°C 25°C --25°C --0.75 --0.50 --0.25 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 IT09098 7 0 0.2 0.4 0.6 Ta= 75 --1.00 0.8 --25°C 1.0 IT09099 2 Base-to-Emitter Voltage, VBE -- V 7 5 hFE -- IC Base-to-Emitter Voltage, VBE -- V hFE -- IC Ta=75°C MCH3145 VCE= --2V 5 3 25°C --25°C Ta=75°C DC Current Gain, hFE DC Current Gain, hFE 2 3 25°C --25°C 2 100 7 5 100 7 5 0.01 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 °C 25°C MCH3245 VCE=2V 7 1.0 3 Collector Current, IC -- A 7 IT09100 7 f T -- IC Collector Current, IC -- A IT09101 f T -- IC Gain-Bandwidth Product, f T -- MHz 5 Gain-Bandwidth Product, f T -- MHz MCH3145 VCE= --10V 5 3 2 MCH3245 VCE=10V 3 100 7 5 3 2 2 100 7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 7 5 IT09102 5 Cob -- VCB Collector Current, IC -- A IT09103 Cob -- VCB MCH3145 f=1MHz MCH3245 f=1MHz Output Capacitance, Cob -- pF 3 Output Capacitance, Cob -- pF 3 2 2 10 7 5 10 7 5 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 57 IT09104 3 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 57 IT09105 Collector-to-Base Voltage, VCB -- V Collector-to-Base Voltage, VCB -- V No.8211-3/5 MCH3145 / MCH3245 5 3 2 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 3 2 VCE(sat) -- IC MCH3245 IC / IB=10 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V MCH3145 IC / IB=10 0.1 7 5 3 2 --0.1 7 5 3 2 =7 Ta C 5° 5 --2 °C = Ta °C 25 0.01 7 5 °C 75 5°C --2 C 25° --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A --1.0 7 IT09106 5 3 VCE(sat) -- IC Collector Current, IC -- A IT09107 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 3 2 MCH3145 IC / IB=20 MCH3245 IC / IB=20 2 0.1 7 5 3 2 --0.1 7 5 3 2 °C 75 Ta= 5°C --2 C 25° = Ta 75 °C 5 --2 °C 25 °C 0.01 --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 3 IT09108 3 Collector Current, IC -- A IT09109 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V VBE(sat) -- IC MCH3245 IC / IB=10 Base-to-Emitter Saturation Voltage, VBE(sat) -- V MCH3145 IC / IB=10 2 2 --1.0 Ta= --25°C 75°C 25°C 1.0 Ta= --25°C 75°C 25°C 7 7 5 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 3 IT09110 3 VBE(sat) -- IC Collector Current, IC -- A IT09111 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 Base-to-Emitter Saturation Voltage, VBE(sat) -- V MCH3145 IC / IB=20 MCH3245 IC / IB=20 2 --1.0 Ta= --25°C 75°C 25°C 1.0 Ta= --25°C 75°C 25°C 7 7 5 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A IT09112 Collector Current, IC -- A IT09113 No.8211-4/5 MCH3145 / MCH3245 7 5 3 2 ASO ICP=4A 1m