MCH3315

Ordering number : ENN8030 MCH3315 P-Channel Silicon MOSFET MCH3315 Features • • • General-Purpose Switching Device Applications Low ON-resistance. Ultrahigh-speed switching. 4V drive. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW≤10µs, duty cycle≤1% Mounted on a ceramic board (900mm2!0.8mm) Conditions Ratings Unit --60 ±20 --1 --4 0.9 150 --55 to +150 V V A A W °C °C Electrical Characteristics at Ta=25°C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Ciss Coss Crss td(on) tr td(off) tf Conditions ID=--1mA, VGS=0 VDS=--60V, VGS=0 VGS=±16V, VDS=0 VDS=--10V, ID=- 1mA VDS=--10V, ID=--0.5A ID=--0.5A, VGS=--10V ID=--0.3A, VGS=--4V VDS=--20V, f=1MHz VDS=--20V, f=1MHz VDS=--20V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min typ max Unit V --60 --1 ±10 µA µA V S mΩ mΩ pF pF pF ns ns ns ns --1.2 0.6 1.2 580 780 180 15 11 8 3 30 25 --2.6 760 1100 Marking : JQ Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1004 TS IM TB-00000247 No.8030-1/4 MCH3315 Continued from preceding page. Parameter Total Gate Charge Gate-to-Source Charge Gate-to-Drain “Miller” Charge Diode Forward Voltage Symbol Qg Qgs Qgd VSD Conditions VDS=--30V, VGS=--10V, ID=--1A VDS=--30V, VGS=--10V, ID=--1A VDS=--30V, VGS=--10V, ID=--1A IS=--1A, VGS=0 Ratings min typ 5 0.8 0.8 max Unit nC nC nC --0.89 - 1.2 - V Package Dimensions unit : mm 2167A 0.25 0.3 3 0.15 Switching Time Test Circuit VIN 0V --10V VIN VDD= --30V 2.1 1.6 ID= --0.5A RL=60Ω 0.25 0.65 2.0 (Bottom view) 0.07 2 1 PW=10µs D.C.≤1% D VOUT G 3 MCH3315 1 : Gate 2 : Source 3 : Drain 1 2 (Top view) P.G 50Ω S 0.85 SANYO : MCPH3 .0V -8.0 V --6 .0V --0.9 --0.8 --4 . .0V --4 .5V --3 Drain Current, ID -- A --1.8 Drain Current, ID -- A --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 0 --3. V --1.6 --1.4 --1.2 --1.0 --0.8 --1 0 --0.2 0 --0.4 --0.6 --0.8 --1.0 IT05476 1500 1400 0 --0.5 --1.0 --1.5 --2.0 Ta= 7 --0.4 5°C 25 --25 °C °C VGS=--2.5V --0.6 --2.5 --3.0 --3.5 Drain-to-Source Voltage, VDS -- V 1500 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V IT05477 RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 0 --2 --4 --6 --8 --10 --12 --14 Ta=25°C ID= --0.5A 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 --60 4V = -V GS A, 0.3 10V = -= -ID GS V 5A, --0. I D= --16 --18 --20 --40 --20 0 20 40 60 80 100 120 Gate-to-Source Voltage, VGS -- V IT07688 Ambient Temperature, Ta -- °C IT07689 No.8030-2/4 25° C --4.0 140 5V VDS= --10V Ta= --25° C 75°C --1.0 ID -- VDS --2.0 ID -- VGS MCH3315 5 yfs -- ID VDS= --10V 5 3 2 IF -- VSD VGS=0 Forward Transfer Admittance, yfs -- S 3 Forward Current, IF -- A 2 2 1.0 7 5 C 5° --1.0 7 5 3 2 --0.1 7 5 3 2 -2 =Ta C 5° 75 °C 2 0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 --0.01 --0.2 --0.4 Ta=7 5 --0.6 --25°C --0.8 3 °C 25°C --1.0 --1.2 IT05481 Drain Current, ID -- A 100 7 5 IT05480 1000 7 5 3 SW Time -- ID Ciss, Coss, Crss -- VDS f=1MHz Diode Forward Voltage, VSD -- V VDD= --30V VGS= --10V td(off) Switching Time, SW Time -- ns Ciss, Coss, Crss -- pF 3 2 tf 2 100 7 5 3 2 10 7 5 3 Ciss 10 7 5 3 2 td(on) tr Coss Crss 1.0 --0.1 2 3 5 7 --1.0 2 3 IT05482 --10 7 5 3 2 0 --5 --10 --15 --20 --25 --30 IT05483 Drain Current, ID -- A --10 VGS -- Qg Drain-to-Source Voltage, VDS -- V ASO Gate-to-Source Voltage, VGS -- V VDS= --30V ID= --1A --8 IDP= --4A